Summary:
Rough proposal on how we can differentiate between the a real setState we can track and one we infer.
Particularly useful when setting `enableTreatSetIdentifiersAsStateSetters=true`
This is mainly so ValidateNoDerivedComputationsInEffects_exp doesn't introduce false positives since we rely on setState type tracking
Test Plan:
Tests
Summary:
We should only run one version of the validation. I think it makes sense
that if the exp version is enable it takes precedence over the stable
one
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35099).
* __->__ #35099
* #35100
Summary:
I missed this test case failing and now having @loggerTestOnly after
landing some other PRs good to know they're not land blocking
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35100).
* #35099
* __->__ #35100
Summary:
When a local state is created sometimes it uses a `prop` or even other
local state for its initial value.
This value is only relevant on first render so we shouldn't consider it
part of our data flow
Test Plan:
Added tests
Summary:
If we are using a clean up function in an effect and that clean up
function depends on a value that is used to set the state we are
validating for we shouldn't throw an error since it is a valid use case
for an effect.
Test Plan:
added test
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/35020).
* #35044
* __->__ #35020
Summary:
This makes the setState usage logic much more robust. We no longer rely
on identifierName.
Now we track when a setState is loaded into a new promoted identifier
variable and track this in a map `setStateLoaded` map.
For other types of instructions we consider the setState to be being
used. In this case we record its usage into the `setStateUsages` map.
Test Plan:
We expect no changes in behavior for the current tests
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34973).
* #35044
* #35020
* __->__ #34973
* #34972
Summary:
Revamped the derivationCache graph.
This fixes a bunch of bugs where sometimes we fail to track from which
props/state we derived values from.
Also, it is more intuitive and allows us to easily implement a Data Flow
Tree.
We can print this tree which gives insight on how the data is derived
and should facilitate error resolution in complicated components
Test Plan:
Added a test case where we were failing to track derivations. Also
updated the test cases with the new error containing the data flow tree
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34995).
* #35044
* #35020
* #34973
* #34972
* __->__ #34995
* #34967
Summary:
With this we are now comparing a snapshot of the derivationCache with
the new changes every time we are done recording the derivations
happening in the HIR.
We have to do this after recording everything since we still do some
mutations on the cache when recording mutations.
Test Plan:
Test the following in playground:
```
// @validateNoDerivedComputationsInEffects_exp
function Component({ value }) {
const [checked, setChecked] = useState('');
useEffect(() => {
setChecked(value === '' ? [] : value.split(','));
}, [value]);
return (
<div>{checked}</div>
)
}
```
This no longer causes an infinite loop.
Added a test case in the next PR in the stack
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34967).
* #35044
* #35020
* #34973
* #34972
* #34995
* __->__ #34967
This PR updates the behavior of Activity so that when it is hidden, it
hides the contents of any portals contained within it.
Previously we had intentionally chosen not to implement this behavior,
because it was thought that this concern should be left to the userspace
code that manages the portal, e.g. by adding or removing the portal
container from the DOM. Depending on the use case for the portal, this
is often desirable anyway because the portal container itself is not
controlled by React.
However, React does own the _contents_ of the portal, and we can hide
those elements regardless of what the user chooses to do with the
container. This makes the hiding/unhiding behavior of portals with
Activity automatic in the majority of cases, and also benefits from
aligning the DOM mutations with the rest of the React's commit phase
lifecycle.
The reason we have to special case this at all is because usually we
only hide the direct DOM children of the Activity boundary. There's no
reason to go deeper than that, because hiding a parent DOM element
effectively hides everything inside of it. Portals are the exception,
because they don't exist in the normal DOM hierarchy; we can't assume
that just because a portal has a parent in the React tree that it will
also have that parent in the actual DOM.
So, whenever an Activity boundary is hidden, we must search for and hide
_any_ portal that is contained within it, and recursively hide its
direct children, too.
To optimize this search, we use a new subtree flag, PortalStatic, that
is set only on fiber paths that contain a HostPortal. This lets us skip
over any subtree that does not contain a portal.
When I moved the outline to above all other rects, I thought it was
clever to unify with the root so that the outline was also used for the
root selection. But the root outline is not drawn like the other rects.
It's outside the padding and doesn't have the 1px adjustment which leads
the overlay to be slightly inside the other rect instead of above it.
This goes back to just having the selected root be drawn by the root
element.
Before:
<img width="652" height="253" alt="Screenshot 2025-11-07 at 11 39 28 AM"
src="https://github.com/user-attachments/assets/334237d1-f190-4995-94cc-9690ec0f7ce1"
/>
After:
<img width="674" height="220" alt="Screenshot 2025-11-07 at 11 44 01 AM"
src="https://github.com/user-attachments/assets/afaa86d8-942a-44d8-a1a5-67c7fb642c0d"
/>
If an error is thrown inside a hidden Activity, it should not escape
into the visible part of the UI. Conceptually, a hidden Activity
boundary is not part of the current UI; it's the same as an unmounted
tree, except for the fact that the state will be restored if it's later
revealed.
Fixes:
- https://github.com/facebook/react/issues/35073
## Summary
This PR upgrades the dependency on update-notifier, used in
react-devtools, to 5.x
This is the latest non-ESM version, so upgrading to it should be
unproblematic (while updating to 6.x and beyond will have to wait).
Upgrading means we avoid installing a lot of outdated dependencies (as
can be seen from the diff in yarn.lock), and resolves part of
https://github.com/facebook/react/issues/28058
Changelog:
https://github.com/yeoman/update-notifier/releases
The most relevant breaking change seems to be that the minimum support
node version is increased from v6 to v10, but I couldn't find what is
currently React's official node version support.
## How did you test this change?
I ran the test-suite locally (`yarn test` in root folder), but I'm not
sure if that one actually covers devtools?
I also built and tested this version of devtools with some internal
company projects (both react and react-native based) – following
guidelines from
https://github.com/facebook/react/issues/28058#issuecomment-1943619292.
I need to regain a field because the SuspenseBoundary type is already at
16 fields in prod, after which it deopts v8.
There are two fields that are only used in prerender to track postpones.
These are ripe to be split into an optional object so that they only
take up one field when they're not used.
We already append `randomKey` to each handle name to prevent external
libraries from accessing and relying on these internals. But more
libraries recently have been getting around this by simply iterating
over the element properties and using a `startsWith` check.
This flag allows us to experiment with moving these handles to an
internal map.
This PR starts with the two most common internals, the props object and
the fiber. We can consider moving additional properties such as the
container root and others depending on perf results.
Also, don't not skip hidden trees.
Memoized state is null when an Offscreen boundary (Suspense or Activity)
is visible.
This logic was inversed in a couple of View Transition checks which
caused pairs to be discovered or not discovered incorrectly for
insertion and deletion of Suspense or Activity boundaries.
This is an alternative to #35059.
If the name needs escaping, then instead of escaping it, we just use a
base64 name. This wouldn't allow you to match on an escaped name in your
own CSS like you should be able to if browsers worked properly. But at
least it would provide matching name in current browsers which is
probably sufficient if you're using auto-generated names.
This also covers some cases where `CSS.escape()` isn't sufficient anyway
like when the name ends in a dot.
Follow up to #35022.
It's now replaced by the `defer` option.
Sounds like nobody is actually using this option, including Meta, so we
can just delete it.
We've long had the CPU suspense feature behind a flag under the terrible
API `unstable_expectedLoadTime={arbitraryNumber}`. We've known for a
long time we want it to just be `defer={true}` (or just `<Suspense
defer>` in the short hand syntax). So this adds the new name and warns
for the old name.
For only the new name, I also implemented SSR semantics in Fizz. It has
two effects here.
1) It renders the fallback before the content (similar to prerender)
allowing siblings to complete quicker.
2) It always outlines the result. When streaming this should really
happen naturally but if you defer a prerendered content it also implies
that it's expensive and should be outlined. It gives you a opt-in to
outlining similar to suspensey images and css but let you control it
manually.
I don't think we're ready to land this yet since we're using it to run
other experiments and our tests. I'm opening this PR to indicate intent
to disable and to ensure tests in other combinations still work. Such as
enableHalt without enablePostpone. I think we'll also need to rewrite
some tests that depend on enablePostpone to preserve some coverage.
The conclusion after this experiment is that try/catch around these are
too likely to block these signals and consider them error. Throwing
works for Hooks and `use()` because the lint rule can ensure that
they're not wrapped in try/catch. Throwing in arbitrary functions not
quite ecosystem compatible. It's also why there's `use()` and not just
throwing a Promise. This might also affect the Catch proposal.
The "prerender" for SSR that's supporting "Partial Prerendering" is
still there. This just disables the `React.postpone()` API for creating
the holes.
Normally if you suspend in a SuspenseList row above a Suspense boundary
in that row, it'll suspend the parent. Which can itself delay the commit
or resuspend a parent boundary. That's because SuspenseList mostly just
coordinates the state of the inner boundaries and isn't a boundary
itself.
However, for tail "hidden" and "collapsed" this is not quite the case
because the rows themselves can avoid being rendered.
In the case of "collapsed" we require at least one Suspense boundary
above to have successfully rendered before committing the list because
the idea of this mode is that you should at least always show some
indicator that things are still loading. Since we'd never try the next
one after that at all, this just works. Expect there was an unrelated
bug that meant that "suspend with delay" on a Retry didn't suspend the
commit. This caused a scenario were it'd allow a commit proceed when it
shouldn't. So I fixed that too. The counter intuitive thing here is that
we won't actually show a previous completed row if the loading state of
the next row is still loading.
For tail "hidden" it's a little different because we don't actually
require any loading indicator at all to be shown while it's loading. If
we attempt a row and it suspends, we can just hide it (and the rest) and
move to commit. Therefore this implements a path where if all the rest
of the tail are new mounts (we wouldn't be required to unmount any
existing boundaries) then we can treat the SuspenseList boundary itself
as "catching" the suspense. This is more coherent semantics since any
future row that we didn't attempt also wouldn't resuspend the parent.
This allows simple cases like `<SuspenseList>{list}</SuspenseList>` to
stream in each row without any indicator and no need for Suspense
boundaries.
We were not recording uEE calls in component/hook syntax. Easy fix.
Added tests matching function component syntax for component syntax +
added one for hooks
For Edge Flight servers, that use Web Streams, we're defining the
`debugChannel` option as:
```
debugChannel?: {readable?: ReadableStream, writable?: WritableStream, ...}
```
Whereas for Node.js Flight servers, that use Node.js Streams, we're
defining it as:
```
debugChannel?: Readable | Writable | Duplex | WebSocket
```
For the Edge Flight clients, there is currently only one direction of
the debug channel supported, so we define the option as:
```
debugChannel?: {readable?: ReadableStream, ...}
```
Consequently, for the Node.js Flight clients, we define the option as:
```
debugChannel?: Readable
```
The presence of a readable debug channel is passed to the Flight client
internally via the `hasReadable` flag on the internal `debugChannel`
option. For the Node.js clients, that flag was accidentally derived from
the public option `debugChannel.readable`, which is conceptually
incorrect, because `debugChannel` is a `Readable` stream, not an options
object with a `readable` property. However, a `Readable` also has a
`readable` property, which is a boolean that indicates whether the
stream is in a readable state. This meant that the `hasReadable` flag
was incidentally still set correctly. Regardless, this was confusing and
unintentional, so we're now fixing it to always set `hasReadable` to
`true` when a `debugChannel` is provided to the Node.js clients. We'll
revisit this in case we ever add support for writable debug channels in
Node.js (and Edge) clients.
This PR adds a `unstable_reactFragments?: Set<FragmentInstance>`
property to DOM nodes that belong to a Fragment with a ref (top level
host components). This allows you to access a FragmentInstance from a
DOM node.
This is flagged behind `enableFragmentRefsInstanceHandles`.
The primary use case to unblock is reusing IntersectionObserver
instances. A fairly common practice is to cache and reuse
IntersectionObservers that share the same config, with a map of
node->callbacks to run for each entry in the IO callback. Currently this
is not possible with Fragment Ref `observeUsing` because the key in the
cache would have to be the `FragmentInstance` and you can't find it
without a handle from the node. This works now by accessing
`entry.target.fragments`.
This also opens up possibilities to use `FragmentInstance` operations in
other places, such as events. We can do
`event.target.unstable_reactFragments`, then access
`fragmentInstance.getClientRects` for example. In a future PR, we can
assign an event's `currentTarget` as the Fragment Ref for a more direct
handle when the event has been dispatched by the Fragment itself.
The first commit here implemented a handle only on observed elements.
This is awkward because there isn't a good way to document or expose
this temporary property. `element.fragments` is closer to what we would
expect from a DOM API if a standard was implemented here. And by
assigning it to all top-level nodes of a Fragment, it can be used beyond
the cached IntersectionObserver callback.
One tradeoff here is adding extra work during the creation of
FragmentInstances as well as keeping track of adding/removing nodes.
Previously we only track the Fiber on creation but here we add a
traversal which could apply to a large set of top-level host children.
The `element.unstable_reactFragments` Set can also be randomly ordered.
In #35019, we excluded debug I/O info from being considered for
enhancing the owner stack if it resolved after the defined `endTime`
option that can be passed to the Flight client. However, we should
include any I/O that was awaited before that end time, even if it
resolved later.
Stacked on #35018.
This mounts the children of SuspenseList backwards. Meaning the first
child is mounted last in the DOM (and effect list). It's like calling
reverse() on the children.
This is meant to set us up for allowing AsyncIterable children where the
unknown number of children streams in at the end (which is the beginning
in a backwards SuspenseList). For consistency we do that with other
children too.
`unstable_legacy-backwards` still exists for the old mode but is meant
to be deprecated.
<img width="100" alt="image"
src="https://github.com/user-attachments/assets/5c2a95d7-34c4-4a4e-b602-3646a834d779"
/>
We have warned about this for a while now so we can make the switch.
Often when you reach for SuspenseList, you mean forwards. It doesn't
make sense to have the default to just be a noop. While "together" is
another useful mode that's more like a Group so isn't so associated with
the default as List. So we're switching it.
However, tail=hidden isn't as obvious of a default it does allow for a
convenient pattern for streaming in list of items by default.
This doesn't yet switch the rendering order of "backwards". That's
coming in a follow up.
It's annoying to have to try to find where it lines up with no hints.
This way when you hover over something it should be on screen.
The strategy I went with is that it scrolls to a percentage along the
scrollable axis but the two might not be exactly the same. Partially
because they have different aspect ratios but also because suspended
boundaries can shrink the document while the suspense tab needs to still
be able to show the boundaries that are currently invisible.
Right now it's possible for things like server environments to appear
before other content in the timeline just because it's in a different
document order.
Ofc the order in production is not guaranteed but we can at least use
the timing information we have as a hint towards the actual order.
Unfortunately since the end time of the RSC stream itself is always
after the content that resolved to produce it, it becomes kind of
determined by the chunking. Similarly since for a clean refresh, the
scripts and styles will typically load after the server content they
appear later. Similarly SSR typically finishes after the RSC parts.
Therefore a hack here is that I artificially delay everything with a
non-null environment (RSC) so that RSC always comes after client-side
(Suspense). This is also consistent with how we color things that have
an environment even if children are just Suspense.
To ensure that we never show a child before a parent, in the timeline,
each child has a minimum time of its parent.
We avoid visiting the same async node twice but if we see it again we
returned "null" indicating that there's no I/O there.
This means that if you have two different Promises both resolving from
the same I/O node then we only show one of them. However, in general we
treat that as two different I/O entries to allow for things like
batching to still show up separately.
This fixes that by caching the return value for multiple visits. So if
we found I/O (but no user space await) in one path and then we visit
that path through a different Promise chain, then we'll still emit it
twice.
However, if we visit the same exact Promise that we emitted an await on
then we skip it. Because there's no need to emit two awaits on the same
thing. It only matters when the path ends up informing whether it has
I/O or not.
IO tasks can execute more than once. E.g. a connection may fire each
time a new message or chunk comes in or a setInterval every time it
executes.
We used to treat these all as one I/O node and just updated the end time
as we go. Most of the time this was fine because typically you would
have a Promise instance whose end time is really the one that gets used
as the I/O anyway.
However, in a pattern like this it could be problematic:
```js
setTimeout(() => {
function App() {
return Promise.resolve(123);
}
renderToReadableStream(<App />);
});
```
Because the I/O's end time is before the render started so it should be
excluded from being considered I/O as part of the render. It happened
outside of render. But because the `Promise.resolve()` is inside render
its end time is after the render start so the promise is considered part
of the render. This is usually not a problem because the end time of the
I/O is still before the start of the render so even though the Promise
is valid it has no I/O source so it's properly excluded.
However, if the I/O's end time updates before we observe this then the
I/O can be considered part of the render. E.g. if this was a setInterval
it would be clearly wrong. But it turns out that even setTimeout can
sometimes execute more than once in the async_hooks because each run of
"process.nextTick" and microtasks respectively are ran in their own
before/after. When a micro task executes after this main body it'll
update the end time which can then turn the whole I/O as being inside
the render.
To solve this properly I create a new I/O node each time before() is
invoked so that each one gets to observe a different end time. This has
a potential CPU and memory allocation cost when there's a lot of them
like in a quick stream.
Now that RN is only on the New Architecture, we can stop stop syncing
the legacy React Native renderers.
In this diff, I just stop syncing them. In a follow up I'll delete the
code for them so only Fabric is left.
This will also allow us to remove the `enableLegacyMode` feature flag.
(disclaimer: I used codex to write this script)
Adds a new `yarn generate-changelog` script to simplify the process of
writing changelogs. You can use it as follows:
```
$ yarn generate-changelog --help
Usage: yarn generate-changelog [--codex|--claude] [--debug] [<pkg@version> ...]
Options:
--codex Use Codex for commit summarization. [boolean]
--claude Use Claude for commit summarization. [boolean]
--debug Enable verbose debug logging. [boolean] [default: false]
-h, --help Show help [boolean]
Examples:
generate-changelog --codex Generate changelog for a single
eslint-plugin-react-hooks@7.0.1 package using Codex.
generate-changelog --claude react@19.3 Generate changelog entries for
react-dom@19.3 multiple packages using Claude.
generate-changelog --codex Generate changelog for all stable
packages using recorded versions.
```
For example, if no args are passed, the script will print find all the
relevant commits affecting packages (defaults to `stablePackages` in
`ReactVersions.js`) and format them as a simple markdown list.
```
$ yarn generate-changelog
## eslint-plugin-react-hooks@7.0.0
* [compiler] improve zod v3 backwards compat (#34877) ([#34877](https://github.com/facebook/react/pull/34877) by [@henryqdineen](https://github.com/henryqdineen))
* [ESLint] Disallow passing effect event down when inlined as a prop (#34820) ([#34820](https://github.com/facebook/react/pull/34820) by [@jf-eirinha](https://github.com/jf-eirinha))
* Switch to `export =` to fix eslint-plugin-react-hooks types (#34949) ([#34949](https://github.com/facebook/react/pull/34949) by [@karlhorky](https://github.com/karlhorky))
* [eprh] Type `configs.flat` more strictly (#34950) ([#34950](https://github.com/facebook/react/pull/34950) by [@poteto](https://github.com/poteto))
* Add hint for Node.js cjs-module-lexer for eslint-plugin-react-hook types (#34951) ([#34951](https://github.com/facebook/react/pull/34951) by [@karlhorky](https://github.com/karlhorky))
* Add hint for Node.js cjs-module-lexer for eslint-plugin-react-hook types (#34953) ([#34953](https://github.com/facebook/react/pull/34953) by [@karlhorky](https://github.com/karlhorky))
// etc etc...
```
If `--codex` or `--claude` is passed, the script will attempt to use
them to summarize the commit(s) in the same style as our existing
CHANGELOG.md.
And finally, for debugging the script you can add `--debug` to see
what's going on.
When a longer function or expression is identified as the source of an
error, we currently print the entire expression in our error message.
This is because we delegate to a Babel helper to print codeframes. Here,
we add some checking and abbreviate the result if it spans too many
lines.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
Supersedes #34951
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
Fix the runtime error with named imports and make the last remaining
[Are The Types
Wrong?](https://arethetypeswrong.github.io/?p=eslint-plugin-react-hooks%400.0.0-experimental-6b344c7c-20251022)
error with `eslint-plugin-react-hooks` go away, thanks to the hint from
Andrew Branch:
- https://github.com/facebook/react/issues/34801#issuecomment-3433478810
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
I tried adding this to `node_modules` and it fixed the failures when
importing named imports like `import { configs, meta, rules } from
'eslint-plugin-react-hooks'`:
```bash
➜ eslint-config-upleveled git:(renovate/react-monorepo) pnpm eslint . --max-warnings 0
Oops! Something went wrong! :(
ESLint: 9.37.0
file:///Users/k/p/eslint-config-upleveled/index.js:13
import reactHooks, { configs } from 'eslint-plugin-react-hooks';
^^^^^^^
SyntaxError: Named export 'configs' not found. The requested module 'eslint-plugin-react-hooks' is a CommonJS module, which may not support all module.exports as named exports.
CommonJS modules can always be imported via the default export, for example using:
import pkg from 'eslint-plugin-react-hooks';
const { configs } = pkg;
at ModuleJob._instantiate (node:internal/modules/esm/module_job:228:21)
at async ModuleJob.run (node:internal/modules/esm/module_job:335:5)
at async onImport.tracePromise.__proto__ (node:internal/modules/esm/loader:647:26)
at async dynamicImportConfig (/Users/k/p/eslint-config-upleveled/node_modules/.pnpm/eslint@9.37.0/node_modules/eslint/lib/config/config-loader.js:186:17)
at async loadConfigFile (/Users/k/p/eslint-config-upleveled/node_modules/.pnpm/eslint@9.37.0/node_modules/eslint/lib/config/config-loader.js:276:9)
at async ConfigLoader.calculateConfigArray (/Users/k/p/eslint-config-upleveled/node_modules/.pnpm/eslint@9.37.0/node_modules/eslint/lib/config/config-loader.js:589:23)
at async #calculateConfigArray (/Users/k/p/eslint-config-upleveled/node_modules/.pnpm/eslint@9.37.0/node_modules/eslint/lib/config/config-loader.js:743:23)
at async directoryFilter (/Users/k/p/eslint-config-upleveled/node_modules/.pnpm/eslint@9.37.0/node_modules/eslint/lib/eslint/eslint-helpers.js:309:5)
at async NodeHfs.<anonymous> (file:///Users/k/p/eslint-config-upleveled/node_modules/.pnpm/@humanfs+core@0.19.1/node_modules/@humanfs/core/src/hfs.js:586:29)
at async NodeHfs.walk (file:///Users/k/p/eslint-config-upleveled/node_modules/.pnpm/@humanfs+core@0.19.1/node_modules/@humanfs/core/src/hfs.js:614:3)
➜ eslint-config-upleveled git:(renovate/react-monorepo) pnpm eslint . --max-warnings 0
➜ eslint-config-upleveled git:(renovate/react-monorepo) # no error
```
The named imports identifiers `configs`, `meta`, and `rules` also
contain values, as a sanity check:
- https://github.com/facebook/react/pull/34951#issuecomment-3433555636
cc @poteto
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
Fix the runtime error with named imports and make the last remaining
[Are The Types
Wrong?](https://arethetypeswrong.github.io/?p=eslint-plugin-react-hooks%400.0.0-experimental-6b344c7c-20251022)
error with `eslint-plugin-react-hooks` go away, thanks to the hint from
@andrewbranch:
- https://github.com/facebook/react/issues/34801#issuecomment-3433478810
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
I tried adding this to `node_modules` and it fixed the failures when
importing named imports like `import { configs, meta, rules } from
'eslint-plugin-react-hooks'`:
```bash
➜ eslint-config-upleveled git:(renovate/react-monorepo) pnpm eslint . --max-warnings 0
Oops! Something went wrong! :(
ESLint: 9.37.0
file:///Users/k/p/eslint-config-upleveled/index.js:13
import reactHooks, { configs } from 'eslint-plugin-react-hooks';
^^^^^^^
SyntaxError: Named export 'configs' not found. The requested module 'eslint-plugin-react-hooks' is a CommonJS module, which may not support all module.exports as named exports.
CommonJS modules can always be imported via the default export, for example using:
import pkg from 'eslint-plugin-react-hooks';
const { configs } = pkg;
at ModuleJob._instantiate (node:internal/modules/esm/module_job:228:21)
at async ModuleJob.run (node:internal/modules/esm/module_job:335:5)
at async onImport.tracePromise.__proto__ (node:internal/modules/esm/loader:647:26)
at async dynamicImportConfig (/Users/k/p/eslint-config-upleveled/node_modules/.pnpm/eslint@9.37.0/node_modules/eslint/lib/config/config-loader.js:186:17)
at async loadConfigFile (/Users/k/p/eslint-config-upleveled/node_modules/.pnpm/eslint@9.37.0/node_modules/eslint/lib/config/config-loader.js:276:9)
at async ConfigLoader.calculateConfigArray (/Users/k/p/eslint-config-upleveled/node_modules/.pnpm/eslint@9.37.0/node_modules/eslint/lib/config/config-loader.js:589:23)
at async #calculateConfigArray (/Users/k/p/eslint-config-upleveled/node_modules/.pnpm/eslint@9.37.0/node_modules/eslint/lib/config/config-loader.js:743:23)
at async directoryFilter (/Users/k/p/eslint-config-upleveled/node_modules/.pnpm/eslint@9.37.0/node_modules/eslint/lib/eslint/eslint-helpers.js:309:5)
at async NodeHfs.<anonymous> (file:///Users/k/p/eslint-config-upleveled/node_modules/.pnpm/@humanfs+core@0.19.1/node_modules/@humanfs/core/src/hfs.js:586:29)
at async NodeHfs.walk (file:///Users/k/p/eslint-config-upleveled/node_modules/.pnpm/@humanfs+core@0.19.1/node_modules/@humanfs/core/src/hfs.js:614:3)
➜ eslint-config-upleveled git:(renovate/react-monorepo) pnpm eslint . --max-warnings 0
➜ eslint-config-upleveled git:(renovate/react-monorepo) # no error
```
The named imports identifiers `configs`, `meta`, and `rules` also
contain values, as a sanity check:
- https://github.com/facebook/react/pull/34951#issuecomment-3433555636
cc @poteto
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
Resolve the type error with the types, according to [Are the types
wrong?](https://arethetypeswrong.github.io/?p=eslint-plugin-react-hooks%407.0.0),
as an additional
- Last attempt: https://github.com/facebook/react/pull/34746
- Original issue: https://github.com/facebook/react/issues/34745
## How did you test this change?
I edited `node_modules/eslint-plugin-react-hooks/index.d.ts` in my
`"module": "Node16"` + `"type": "module"` project and my error went
away:
- https://github.com/facebook/react/issues/34801#issuecomment-3433053067
cc @poteto @michaelfaith @andrewbranch
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
Fixes a few small things:
- Update imports to reference root babel-plugin-react-compiler rather
than from `[...]/src/...`
- Remove unused cosmiconfig options parsing for now
- Update type exports in babel-plugin-react-compiler accordingly
## Summary
This PR updates getChangedHooksIndices to account for the fact that
useSyncExternalStore internally mounts two hooks, while DevTools should
treat it as a single user-facing hook.
It introduces a helper isUseSyncExternalStoreHook to detect this case
and adjust iteration so the extra internal hook is skipped when counting
changes.
Before:
https://github.com/user-attachments/assets/0db72a4e-21f7-44c7-ba02-669a272631e5
After:
https://github.com/user-attachments/assets/4da71392-0396-408d-86a7-6fbc82d8c4f5
## How did you test this change?
I used this component to reproduce this issue locally (I followed
instructions in `packages/react-devtools/CONTRIBUTING.md`).
```ts
function Test() {
// 1
React.useSyncExternalStore(
() => {},
() => {},
() => {},
);
// 2
const [state, setState] = useState('test');
return (
<>
<div
onClick={() => setState(Math.random())}
style={{backgroundColor: 'red'}}>
{state}
</div>
</>
);
}
```
Within a function expression local variables may use StoreContext for
local context variables, so the reassignment check here was firing too
often. We should only report an error for variables that are declared
outside the function, ie part of its `context`.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34904).
* #34903
* __->__ #34904
This eliminates the gap in a reproducer for the React DevTools browser
extension from the source code that we submit to Firefox extension
stores.
We use the commit hash as part of the Backend version, here:
2cfb221937/packages/react-devtools-extensions/utils.js (L26-L38)
The problem is that we archive the source code for Mozilla extension
store reviews and there is no git. But since we still download the React
sources from the CI, we could reuse the hash from `build/COMMIT_HASH`
file.
This has been causing some issues with the submission review on Firefox
store: we use OS-level paths in these source maps, which makes the build
artifact different from the one that's been submitted.
Also saves ~100Kb for main.js artifact.
This is an aesthetic thing. Most simple I/O entries are things like
"script", "stylesheet", "fetch" etc. which are all a single word and
lower case. The "RSC stream" name sticks out and draws unnecessary
attention to itself where as it's really the least interesting to look
at.
I don't love the name because I'm not sure how to explain it. It's
really mainly the byte size of the payload itself without considering
things like server awaits things which will have their own cause. So I'm
trying to communicate the download size of the stream of downloading the
`.rsc` file or the `"rsc stream"`.
This shows the title in the top corner of the rect if there's enough
space.
The complex bit here is that it can be noisy if too many boundaries
occupy the same space to overlap or partially overlap.
This uses an R-tree to store all the rects to find overlapping
boundaries to cut the available space to draw inside the rect. We use
this to compute the rectangle within the rect which doesn't have any
overlapping boundaries.
The roots don't count as overlapping. Similarly, a parent rect is not
consider overlapping a child. However, if two sibling boundaries occupy
the same space, no title will be drawn.
<img width="734" height="813" alt="Screenshot 2025-10-19 at 5 34 49 PM"
src="https://github.com/user-attachments/assets/2b848b9c-3b78-48e5-9476-dd59a7baf6bf"
/>
We might also consider drawing the "Initial Paint" title at the root but
that's less interesting. It's interesting in the beginning before you
know about the special case at the root but after that it's just always
the same value so just adds noise.
When you use the `createFromFetch` API we assume that the start time of
the request is the same time as when you call `createFromFetch` but in
principle you could use it with a Promise that starts earlier and just
happens to resolve to a `Response`.
When you use `createFromReadableStream` that is almost definitely the
case. E.g. you might have started it way earlier and you don't call
`createFromReadableStream` until you get the headers back (the fetch
promise resolves).
This adds an option to pass in the start time for debug purposes if you
started the request before starting to parse it.
When you create a snapshot from an AsyncLocalStorage in Node.js, that
creates a new bound AsyncResource which everything runs inside of.
3437e1c4bd/lib/internal/async_local_storage/async_hooks.js (L61-L67)
This resource is itself tracked by our async debug tracking as I/O. We
can't really distinguish these in general from other AsyncResources
which are I/O.
However, by default they're given the name `"bound-anonymous-fn"` if you
pass it an anonymous function or in the case of a snapshot, that's
built-in:
3437e1c4bd/lib/async_hooks.js (L262-L263)
We can at least assume that these are non-I/O. If you want to ensure
that a bound resource is not considered I/O, you can ensure your
function isn't assigned a name or give it this explicit name.
The other issue here is that, the sequencing here is that we track the
callsite of the `.snapshot()` or `.bind()` call as the trigger. So if
that was outside of render for example, then it would be considered
non-I/O. However, this might miss stuff if you resolve promises inside
the `.run()` of the snapshot if the `.run()` call itself was spawned by
I/O which should be tracked. Time will tell if those patterns appear.
However, in cases like nested renders (e.g. Next.js's "use cache") then
restoring it as if it was outside the parent render is what you do want.
Stacked on #34906.
Infer name from stack if it's the generic "lazy" name. It might be
wrapped in an abstraction. E.g. `next/dynamic`.
Also use the function name as a description of a resolved function
value.
<img width="310" height="166" alt="Screenshot 2025-10-18 at 10 42 05 AM"
src="https://github.com/user-attachments/assets/c63170b9-2b19-4f30-be7a-6429bb3ef3d9"
/>
Stacked on #34892.
In the timeline scrubber each timeline entry gets a label and color
assigned based on the environment computed for that step.
In the rects, we find the timeline step that this boundary is part of
and use that environment to assign a color. This is slightly different
than picking from the boundary itself since it takes into account parent
boundaries.
In the "suspended by" section we color each entry individually based on
the environment that spawned the I/O.
<img width="790" height="813" alt="Screenshot 2025-10-17 at 12 18 56 AM"
src="https://github.com/user-attachments/assets/c902b1fb-0992-4e24-8e94-a97ca8507551"
/>
Stacked on #34885.
This refactors the timeline to store not just an id but a complex object
for each step. This will later represent a group of boundaries.
Each timeline step is assigned an environment name. We pick the last
environment name (assumed to have resolved last) from the union of the
parent and child environment names. I.e. a child step is considered to
be blocked by the parent so if a child isn't blocked on any environment
name it still gets marked as the parent's environment name.
In a follow up, I'd like to reorder the document order timeline based on
environment names to favor loading everything in one environment before
the next.
Stacked on #34881.
We don't paint suspense boundaries if there are no suspenders. This does
the same with the root. The root is still selectable so you can confirm
but there's no affordance drawing attention to click the root.
This could happen if you don't use the built-ins of React to load things
like scripts and css. It would never happen in something like Next.js
where code and CSS is loaded through React-native like RSC.
However, it could also happen in the Activity scoped case when all
resources are always loaded early.
Stacked on #34880.
In #34861 I removed the highlight of the real view when hovering the
timeline since it was disruptive to stepping through the visuals.
This makes it so that when we hover the timeline we highlight the rect
with the subtle hover effect added in #34880.
We can now just use the one shared state for this and don't need the CSS
psuedo-selectors.
<img width="603" height="813" alt="Screenshot 2025-10-16 at 3 11 17 PM"
src="https://github.com/user-attachments/assets/a018b5ce-dd4d-4e77-ad47-b4ea068f1976"
/>
<img width="1011" height="811" alt="Screenshot 2025-10-16 at 2 20 46 PM"
src="https://github.com/user-attachments/assets/6dea3962-d369-4823-b44f-2c62b566c8f1"
/>
The selection is now clearer with a wider outline which spans the
bounding box if there are multi rects.
The color now gets darked changes on hover with a slight animation.
The colors are now mixed from constants defined which are consistently
used in the rects, the time span in the "suspended by" side bar and the
scrubber. I also have constants defined for "server" and "other" debug
environments which will be used in a follow up.
Using `renderToReadableStream` in Node.js with binary data from
`fs.readFileSync` (or `Buffer.allocUnsafe`) could cause downstream
consumers (like compression middleware) to fail with "Cannot perform
Construct on a detached ArrayBuffer".
The issue occurs because Node.js uses an 8192-byte Buffer pool for small
allocations (< 4KB). When React's `VIEW_SIZE` was 2KB, files between
~2KB and 4KB would be passed through as views of pooled buffers rather
than copied into `currentView`. ByteStreams (`type: 'bytes'`) detach
ArrayBuffers during transfer, which corrupts the shared Buffer pool and
causes subsequent Buffer operations to fail.
Increasing `VIEW_SIZE` from 2KB to 4KB ensures all chunks smaller than
4KB are copied into `currentView` (which uses a dedicated 4KB buffer
outside the pool), while chunks 4KB or larger don't use the pool anyway.
Thus no pooled buffers are ever exposed to ByteStream detachment.
This adds 2KB memory per active stream, copies chunks in the 2-4KB range
instead of passing them as views (small CPU cost), and buffers up to 2KB
more data before flushing. However, it avoids duplicating large binary
data (which copying everything would require, like the Edge entry point
currently does in `typedArrayToBinaryChunk`).
Related issues:
- https://github.com/vercel/next.js/issues/84753
- https://github.com/vercel/next.js/issues/84858
As part of the new inference model we updated to (correctly) treat
destructuring spread as creating a new mutable object. This had the
unfortunate side-effect of reducing precision on destructuring of props,
though:
```js
function Component({x, ...rest}) {
const z = rest.z;
identity(z);
return <Stringify x={x} z={z} />;
}
```
Memoized as the following, where we don't realize that `z` is actually
frozen:
```js
function Component(t0) {
const $ = _c(6);
let x;
let z;
if ($[0] !== t0) {
const { x: t1, ...rest } = t0;
x = t1;
z = rest.z;
identity(z);
...
```
#34341 was our first thought of how to do this (thanks @poteto for
exploring this idea!). But during review it became clear that it was a
bit more complicated than I had thought. So this PR explores a more
conservative alternative. The idea is:
* Track known sources of frozen values: component props, hook params,
and hook return values.
* Find all object spreads where the rvalue is a known frozen value.
* Look at how such objects are used, and if they are only used to access
properties (PropertyLoad/Destructure), pass to hooks, or pass to jsx
then we can be very confident the object is not mutated. We consider any
such objects to be frozen, even though technically spread creates a new
object.
See new fixtures for more examples.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34900).
* __->__ #34900
* #34887
In my previous PR I fixed some cases but broke others. So, new approach.
Two phase algorithm:
* First pass is forward data flow to determine all usages of macros.
This is necessary because many of Meta's macros have variants that can
be accessed via properties, eg you can do `macro(...)` but also
`macro.variant(...)`.
* Second pass is backwards data flow to find macro invocations (JSX and
calls) and then merge their operands into the same scope as the macro
call.
Note that this required updating PromoteUsedTemporaries to avoid
promoting macro calls that have interposing instructions between their
creation and usage. Macro calls in general are pure so it should be safe
to reorder them.
In addition, we're now more precise about `<fb:plural>`, `<fbt:param>`,
`fbt.plural()` and `fbt.param()`, which don't actually require all their
arguments to be inlined. The whole point is that the plural/param value
is an arbitrary value (along with a string name). So we no longer
transitively inline the arguments, we just make sure that they don't get
inadvertently promoted to named variables.
One caveat: we actually don't do anything to treat macro functions as
non-mutating, so `fbt.plural()` and friends (function form) may still
sometimes group arguments just due to mutability inference. In a
follow-up, i'll work to infer the types of nested macro functions as
non-mutating.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34887).
* #34900
* __->__ #34887
This is a great validation, so let's enable by default. Changes:
* Move the validation logic into ValidateUseMemo alongside the new check
that the useMemo result is used
* Update the lint description
* Make the void memo errors lint-only, they don't require us to skip
compilation (as evidenced by the fact that we've had this validation
off)
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34882).
* #34855
* __->__ #34882
Two additional validations for useMemo:
* Disallow reassigning to values declared outside the useMemo callback
(always on)
* Disallow unused useMemo calls (part of the validateNoVoidUseMemo
feature flag, which in turn is off by default)
We should probably enable this flag though!
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34868).
* #34855
* #34882
* __->__ #34868
Added the standard Meta Platforms, Inc. MIT license notice to the top of
the feature flag comparison script to ensure compliance with repository
licensing requirements and for code consistency.
**No functional or logic changes were made to the code.**
## Summary
Fixes https://github.com/facebook/react/issues/34793.
We are allowing passing down effect events when they are inlined as a
prop.
```
<Child onClick={useEffectEvent(...)} />
```
This seems like a case that someone not familiar with `useEffectEvent`'s
purpose could fall for so this PR introduces logic to disallow its
usage.
An alternative implementation would be to modify the name and function
of `recordAllUseEffectEventFunctions` to record all `useEffectEvent`
instances either assigned to a variable or not, but this seems clearer.
Or we could also specifically disallow its usage inside JSX. Feel free
to suggest any improvements.
## How did you test this change?
- Added a new test in
`packages/eslint-plugin-react-hooks/__tests__/ESLintRulesOfHooks-test.js`.
All tests pass.
## Summary
When upgrading to `babel-plugin-react-compiler@1.0.0` in a project that
uses `zod@3` we are running into TypeScript errors like:
```
node_modules/babel-plugin-react-compiler/dist/index.d.ts:435:10 - error TS2694: Namespace '"/REDACTED/node_modules/zod/v3/external"' has no exported member 'core'.
435 }, z.core.$strip>>>;
~~~~
```
This problem seems to be related to
d6eb735938, which introduced zod v3/v4
compatibility. Since `zod` is bundled into the compiler source this does
not cause runtime issues and only manifests as TypeScript errors. My
proposed solution is this PR is to use zod's [subpath versioning
strategy](https://zod.dev/v4/versioning?id=versioning-in-zod-4) which
allows you to support v3 and v4 APIs on both major versions.
Changes in this PR include:
- Updated `zod` import paths to `zod/v4`
- Bumped min `zod` version to `^3.25.0` for zod which guarantees the
`zod/v4` subpath is available.
- Updated `zod-validation-error` import paths to
`zod-validation-error/v4`
- Bumped min `zod-validation-error ` version to `^3.5.0`
- Updated `externals` tsup configuration where appropriate.
Once the compiler drops zod v3 support we could optionally remove the
`/v4` subpath from the imports.
## How did you test this change?
Not totally sure the best way to test. I ran `NODE_ENV=production yarn
workspace babel-plugin-react-compiler run build --dts` and diffed the
`dist/` folder between my change and `v1.0.0` and it looks correct. We
have a `patch-package` patch to workaround this for now and it works as
expected.
```diff
diff --git a/node_modules/babel-plugin-react-compiler/dist/index.d.ts b/node_modules/babel-plugin-react-compiler/dist/index.d.ts
index 81c3f3d..daafc2c 100644
--- a/node_modules/babel-plugin-react-compiler/dist/index.d.ts
+++ b/node_modules/babel-plugin-react-compiler/dist/index.d.ts
@@ -1,7 +1,7 @@
import * as BabelCore from '@babel/core';
import { NodePath as NodePath$1 } from '@babel/core';
import * as t from '@babel/types';
-import { z } from 'zod';
+import { z } from 'zod/v4';
import { NodePath, Scope } from '@babel/traverse';
interface Result<T, E> {
```
Co-authored-by: Henry Q. Dineen <henryqdineen@gmail.com>
This ensures that the outline of a previous rectangle lines up on the
same pixel as the next rectangle so that they appear consecutive.
<img width="244" height="51" alt="Screenshot 2025-10-16 at 11 35 32 AM"
src="https://github.com/user-attachments/assets/75ffde6f-8cc6-49c1-8855-3953569546b4"
/>
I don't love this implementation. There's probably a smarter way. Was
trying to avoid adding another element.
Currently the sub-pixel precision is lost which can lead to things not
lining up properly and being slightly off or overlapping.
We need some sub-pixel precision.
Ideally we'd just keep the floating point as is. I'm not sure why the
operations is limited to integers. We don't send it as a typed array
anyway it seems which would ideally be more optimal. Even if we did, we
haven't defined a precision for the protocol. Is it 32bit integer?
64bit? If it's 64bit we can fit a float anyway. Ideally it would be more
variable precision like just pushing into a typed array directly with
the option to write whatever precision we want.
Add inspection button to Suspense tab which lets you select only among
Suspense nodes. It highlights all the DOM nodes in the root of the
Suspense node instead of just the DOM element you hover. The name is
inferred.
<img width="1172" height="841" alt="Screenshot 2025-10-15 at 8 03 34 PM"
src="https://github.com/user-attachments/assets/f04d965b-ef6e-4196-9ba0-51626148fa1a"
/>
We now do a single pass over the HIR, building up two data structures:
* One tracks values that are known macro tags or macro calls.
* One tracks operands of macro-related instructions so that we can later
group them.
After building up these data structures, we do a pass over the latter
structure. For each macro call instruction, we recursively traverse its
operands to ensure they're in the same scope. Thus, something like
`fbt('hello' + fbt.param(foo(), "..."))` will correctly merge the fbt
call, the `+` binary expression, the `fbt.param()` call, and `foo()`
into a single scope.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34865).
* #34855
* __->__ #34865
We should only persist a selection once you click. Currently, we persist
the selection if you just hover which means you lose your selection
immediately when just starting to inspect. That's not what Chrome
Elements tab does - it selects on click.
I find it very frustrating that the highlight covers up the content that
I'm trying to review when stepping through the timeline. It also
triggered on keyboard navigation due to the focus which was annoying.
We could highlight something in the rects instead potentially.
In InferTypes when we infer types for properties during destructuring,
we were breaking out of the loop when we encounter a hole in the array.
Instead we should just skip that element and continue inferring later
properties.
Closes#34748
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34847).
* #34855
* __->__ #34847
This revealed that a lot of the event types were defined on the wrong
end of the bridge.
It was also a problem that events with the same name couldn't have
different arguments.
I get the wish to click the shadow but not all child boundaries are
within the bounds of the outer Suspense boundary's node.
Sometimes they overflow naturally and if we make it overflow hidden we
hide the boundaries. Maybe it would be ok if they're actually clipped by
the real DOM but right now it covers up boundaries that should be there.
Additionally, there's also a common case where the parent boundary
shrinks when suspending the children. That then causes the suspended
child boundaries to be clipped so that you can't restore them. Maybe the
virtual boundary shouldn't shrink in this case.
We can't measure Text nodes directly but we can measure a Range around
them.
This is useful since it's common, at least in examples, to use text
nodes as children of a Suspense boundary. Especially fallbacks.
We already do this in the update pass. That's what
`shouldMeasureSuspenseNode` does.
We also don't update measurements when we're inside an offscreen tree.
However, we didn't check if the boundary itself was in a suspended state
when in the `measureUnchangedSuspenseNodesRecursively` path.
This caused boundaries to disappear when their fallback didn't have a
rect (including their timeline entries).
Treat fake eval anonymous stacks as built-in. Hide built-in stack frames
unless they're used to call into a non-ignored stack frame.
The two main things to fix here is that 1) we're showing a linkified
stack for fake anonymous and 2) we're showing only built-ins when the
stack is completely internal. Meaning framework code is all noise.
Fixes https://github.com/facebook/react/issues/34770.
We need to clear measures at some point, otherwise all these copies of
props that we end up recording will allocate too much memory in
Chromium. This adds `performance.clearMeasures(...)` calls to such cases
in DEV.
Validated that entries are still shown on Performance panel timeline.
Stacked on #34829.
This lets you get an overview more easily when there's lots of things
like scripts downloading. Pluralized the name. E.g. `script` ->
`scripts` or `fetch` -> `fetches`.
This only groups them consecutively when they'd have the same place in
the list anyway because otherwise it might cover up some kind of
waterfall effects.
<img width="404" height="225" alt="Screenshot 2025-10-13 at 12 06 51 AM"
src="https://github.com/user-attachments/assets/da204a8e-d5f7-4eb0-8c51-4cc5bfd184c4"
/>
Expanded:
<img width="407" height="360" alt="Screenshot 2025-10-13 at 12 07 00 AM"
src="https://github.com/user-attachments/assets/de3c3de9-f314-4c87-b606-31bc49eb4aba"
/>
This lets you assign a name to a Promise that's passed into first party
code from third party since it otherwise would have no other stack frame
to indicate its name since the whole creation stack would be in third
party.
We already respect the `displayName` on the client but it's more
complicated on the server because we don't only consider the exact
instance passed to `use()` but the whole await sequence and we can pick
any Promise along the way for consideration. Therefore this also adds a
change where we pick the Promise node for consideration if it has a name
but no stack. Where we otherwise would've picked the I/O node.
Another thing that this PR does is treat anonymous stack frames (empty
url) as third party for purposes of heuristics like "hasUnfilteredFrame"
and the name assignment. This lets you include these in the actual
generated stacks (by overriding `filterStackFrame`) but we don't
actually want them to be considered first party code in the heuristics
since it ends up favoring those stacks and using internals like
`Function.all` in name assignment.
The index is both used as the key and for hydration purposes. Previously
we didn't preserve the index when sorting so the index didn't line up
which caused hydration to be the wrong slot when sorted.
`isStrictModeNonCompliant` on the root just means that it supports
strict mode. It's inherited by other nodes.
It's not possible to opt-in to strict mode on the root itself but rather
right below it. So we should not mark the root as being non-compliant.
This lets you select the root in the suspense tab and it shouldn't show
as red with a warning.
This ignore a Suspense boundary from the timeline when it has no visual
representation. No rect. In effect, this is not blocking the user
experience.
Technically it could be an effect that mounts which can have a
side-effect which is visible.
It could also be a meta-data tag like `<title>` which is visible. We
could hoistables a virtual representation by giving them a virtual rect.
E.g. at the top of the page. This could be added after the fact.
This ensures that we don't scroll on changes to the timeline such as
when loading a new page or while the timeline is still loading.
We only auto scroll to a boundary when we perform an explicit operation
from the user.
If an inner Offscreen commits an unhide, but an outer Offscreen is still
hidden but they're controlling the same DOM node then we shouldn't
unhide the DOM node yet.
This keeps track of whether we're directly inside a hidden offscreen. It
might be better to just do the tree search instead of keeping the stack
state since it's a rare case. Although this hide/unhide path does
trigger a lot of times even when there's no change.
This was technically a bug with Suspense too but it doesn't appear
because a suspended Suspense boundary never commits its partial state.
If it did, it would trigger this same path. But it can happen with an
outer Activity and inner Suspense.
When a debug channel is hooked up, and we're serializing debug models,
if the result is an already outlined reference, we can emit it directly,
without also outlining the reference. This would create an unnecessary
indirection.
Before:
```
:N1760023808330.2688
0:D"$2"
0:D"$3"
0:D"$4"
0:"hi"
1:{"name":"Component","key":null,"env":"Server","stack":[],"props":{}}
2:{"time":3.0989999999999327}
3:"$1"
4:{"time":3.261792000000014}
```
After:
```
:N1760023786873.8916
0:D"$2"
0:D"$1"
0:D"$3"
0:"hi"
1:{"name":"Component","key":null,"env":"Server","stack":[],"props":{}}
2:{"time":2.4145829999999933}
3:{"time":2.5488749999999527}
```
Notice how the second debug info chunk is now directly referencing chunk
`1` in the debug channel, without outlining and referencing `"$1"` as
its own debug chunk `3`.
This not only simplifies the RSC payload, and reduces overhead. But more
importantly it helps the client resolve cyclic references when a model
has debug info that has a reference back to the model. The client is
currently not able to resolve such a cycle when those chunk indirections
are involved. Ideally, it would also be able to resolve them regardless,
but that requires more work. In the meantime, this fixes an immediate
issue.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
Fixes a syntax error causing the Compiler playground to crash. Resolves
https://github.com/facebook/react/issues/34622.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
Tested locally and added a test.
<img width="1470" height="836" alt="Screenshot 2025-09-27 at 8 13 07 AM"
src="https://github.com/user-attachments/assets/29473682-94c3-49dc-9ee9-c2004062aaea"
/>
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
This pull request fixes a small UI issue in the React Developer Tools
settings panel.
The “Display density” field was appearing twice in the General tab.
Fix : https://github.com/facebook/react/issues/34791
Renames the `recommended` property on LintRule to `preset`, to allow
exporting rules for different presets. For now the `Recommended` and
`RecommendedLatest` presets are the same, but in the next PR I will
enable more rules for the latest preset.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34782).
* #34783
* __->__ #34782
For 7.0.0:
Slim down presets to just 2 configurations:
- `recommended`: legacy and flat config with all recommended rules, and
- `recommended-latest`: legacy and flat config with all recommended
rules plus new bleeding edge experimental compiler rules
Removed:
- `recommended-latest-legacy`
- `flat/recommended`
Please see the README for new install instructions.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34757).
* #34783
* #34782
* __->__ #34757
There's a couple of issues with serializing Buffer in the debug renders.
For one, the Node.js Buffer has a `toJSON` on it which turns the binary
data into a JSON array which is very inefficient to serialize compared
to the real buffer. For debug info we never really want to resolve these
and unlike the regular render we can't error. So this uses the trick
where we read the original value. It's still unfortunate that this
intermediate gets created at all but at least now we're not serializing
it.
Second, we have a limit on depth of objects but we didn't have a limit
on width like large arrays or typed arrays. This omits large arrays from
the payload when possible and make them deferred when there's a debug
channel.
## Overview
This PR adds the `ref` prop to `<Fragment>` in `react@canary`.
This means this API is ready for final feedback and prepared for a
semver stable release.
## What this means
Shipping Fragment refs to canary means they have gone through extensive
testing in production, we are confident in the stability of the APIs,
and we are preparing to release it in a future semver stable version.
Libraries and frameworks following the [Canary
Workflow](https://react.dev/blog/2023/05/03/react-canaries) should begin
implementing and testing these features.
## Why we follow the Canary Workflow
To prepare for semver stable, libraries should test canary features like
Fragment refs with `react@canary` to confirm compatibility and prepare
for the next semver release in a myriad of environments and
configurations used throughout the React ecosystem. This provides
libraries with ample time to catch any issues we missed before slamming
them with problems in the wider semver release.
Since these features have already gone through extensive production
testing, and we are confident they are stable, frameworks following the
[Canary Workflow](https://react.dev/blog/2023/05/03/react-canaries) can
also begin adopting canary features like Fragment refs.
This adoption is similar to how different Browsers implement new
proposed browser features before they are added to the standard. If a
frameworks adopts a canary feature, they are committing to stability for
their users by ensuring any API changes before a semver stable release
are opaque and non-breaking to their users.
Apps not using a framework are also free to adopt canary features like
Fragment refs as long as they follow the [Canary
Workflow](https://react.dev/blog/2023/05/03/react-canaries), but we
generally recommend waiting for a semver stable release unless you have
the capacity to commit to following along with the canary changes and
debugging library compatibility issues.
Waiting for semver stable means you're able to benefit from libraries
testing and confirming support, and use semver as signal for which
version of a library you can use with support of the feature.
## Docs
Check out the ["React Labs: View Transitions, Activity, and
more"](https://react.dev/blog/2025/04/23/react-labs-view-transitions-activity-and-more#fragment-refs)
blog post, and [the new docs for Fragment
refs`](https://react.dev/reference/react/Fragment#fragmentinstance) for
more info.
## Overview
This PR ships the View Transition APIs to `react@canary`:
- [`<ViewTransition
/>`](https://react.dev/reference/react/ViewTransition)
-
[`addTransitionType`](https://react.dev/reference/react/addTransitionType)
This means these APIs are ready for final feedback and prepare for
semver stable release.
## What this means
Shipping `<ViewTransition />` and `addTransitionType` to canary means
they have gone through extensive testing in production, we are confident
in the stability of the APIs, and we are preparing to release it in a
future semver stable version.
Libraries and frameworks following the [Canary
Workflow](https://react.dev/blog/2023/05/03/react-canaries) should begin
implementing and testing these features.
## Why we follow the Canary Workflow
To prepare for semver stable, libraries should test canary features like
`<ViewTransition />` with `react@canary` to confirm compatibility and
prepare for the next semver release in a myriad of environments and
configurations used throughout the React ecosystem. This provides
libraries with ample time to catch any issues we missed before slamming
them with problems in the wider semver release.
Since these features have already gone through extensive production
testing, and we are confident they are stable, frameworks following the
[Canary Workflow](https://react.dev/blog/2023/05/03/react-canaries) can
also begin adopting canary features like `<ViewTransition />`.
This adoption is similar to how different Browsers implement new
proposed browser features before they are added to the standard. If a
frameworks adopts a canary feature, they are committing to stability for
their users by ensuring any API changes before a semver stable release
are opaque and non-breaking to their users.
Apps not using a framework are also free to adopt canary features like
`<ViewTransition>` as long as they follow the [Canary
Workflow](https://react.dev/blog/2023/05/03/react-canaries), but we
generally recommend waiting for a semver stable release unless you have
the capacity to commit to following along with the canary changes and
debugging library compatibility issues.
Waiting for semver stable means you're able to benefit from libraries
testing and confirming support, and use semver as signal for which
version of a library you can use with support of the feature.
## Docs
Check out the ["React Labs: View Transitions, Activity, and
more"](https://react.dev/blog/2025/04/23/react-labs-view-transitions-activity-and-more#view-transitions)
blog post, and [the new docs for `<ViewTransition
/>`](https://react.dev/reference/react/ViewTransition) and
[`addTransitionType`](https://react.dev/reference/react/addTransitionType)
for more info.
Adds back HermesParser to eslint-plugin-react-hooks. There are still
[external users of
Flow](https://github.com/facebook/react/pull/34719#issuecomment-3368137743)
using the plugin, so we shouldn't break the plugin for them. However, we
still have the problem of double parsing: once from eslint (which we
discard) and then another via babel/hermes parser.
In the long run we should investigate a translation layer from estree to
babel (or alternatively, update the compiler to take estree as input).
But for now, I am reverting the PR.
This does mean that [Sandpack in
react.dev](11cb6b5915/src/components/MDX/Sandpack/runESLint.tsx (L31))
cannot update to the latest eprh as HermesParser does not appear to be
able to be run in a browser. I discovered this while trying to update
eprh on react.dev last week, but didn't investigate deeply. I'll need to
double check that again to find out more.
Another attempt to fix#34745. I updated our fixture for eslint-v9 to
include running tsc. I believe there were 2 issues:
1. `export * from './cjs/eslint-plugin-react-hooks'` in npm/index.d.ts
was no longer correct as we updated index.ts to export default instead
of named exports
2. After fixing ^ there was a typescript error which I fixed by making
some small tweaks
We override Cmd+F to jump to our search input instead of searching
through the HTML. This is ofc critical since our view virtualized.
However, Chrome DevTools installs its own listener on the document as
well (in the bubble phase) so if we prevent it at the document level
it's too late and it ends up stealing the focus instead. If we instead
listen at the documentElement it works as intended.
The workflow was correctly publishing the package(s) specified in
`only`, but due to incorrect logic it would also run the 'Publish all
packages' step.
Partial redo of #34710. The changes there tried to use `z.function(args,
return)` to be compatible across Zod v3 and v4, but Zod 4's function API
has completely changed. Instead, I've updated to just use `z.any()`
where we expect a function, and manually validate that it's a function
before we call the value. We already have validation of the return type
(also using Zod).
Co-authored-by: kolvian <eliot@pontarelli.com>
We will be focusing eslint-plugin-react-hooks as the primary OSS-only
package for our lint plugin. eslint-plugin-react-compiler will remain as
a Meta only package as some limitations of our internal infra require us
to use packages that aren't widely adopted by the rest of the industry.
This PR removes `hermes-parser`, which was meant to support parsing Flow
syntax.
Fixed two small issues with the config panel in the compiler playground:
1. Object descriptions were being confined in the config box and most of
it would not be visible upon hover
2. Changed it so that "Applied Configs" would only display a valid set
of configs, rather than switching between "Invalid Configs" and the set
of options. This would be less visually jarring for users as the Output
panel already displays errors. Additionally, if users want to see the
list of config options but have a currently broken config, they would
previously not know how to fix it.
Object hover before:
<img width="702" height="481" alt="Screenshot 2025-09-26 at 10 41 03 AM"
src="https://github.com/user-attachments/assets/b2ddec2f-16ba-41a1-be1f-96211f46764c"
/>
Hover after:
<img width="702" height="481" alt="Screenshot 2025-09-26 at 10 40 37 AM"
src="https://github.com/user-attachments/assets/dc713a22-4710-46a8-a5d7-485060cc9074"
/>
Applied Configs always displays the last valid set of configs:
https://github.com/user-attachments/assets/2fb9232f-7388-4488-9b7a-bb48bf09e4ca
Stacked on #34544
We only have getBoundingClientRect available from RN currently. This
should work as a substitute for this case because the equivalent of
multi-rect elements in RN is a nested Text component. We only include
the rects of top-level host components here so we can assume that
calling getBoundingClientRect on each child is the same result.
Tested in react-native with Fantom.
Stacked on #34533 for root fragment handling
This is the same approach as DOM, where we call getRootNode on the
parent.
Tests are in react-native using Fantom.
This rule was a leftover from a while ago and doesn't actually lint
anything useful. Specifically, you get a lint error if you try to opt
out a component that isn't already bailing out. If there's a bailout the
compiler already safely skips over it, so adding `'use no memo'` there
is unnecessary.
Fixes#31407
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34703).
* __->__ #34703
* #34700
Previously, the `recommended` config used the legacy ESLint format
(plugins as an array of strings). This causes errors when used with
ESLint v9's `defineConfig()` helper. This was following [eslint's own
docs](https://eslint.org/docs/latest/extend/plugins#backwards-compatibility-for-legacy-configs):
> With this approach, both configuration systems recognize
"recommended". The old config system uses the recommended key while the
current config system uses the flat/recommended key. The defineConfig()
helper first looks at the recommended key, and if that is not in the
correct format, it looks for the flat/recommended key. This allows you
an upgrade path if you’d later like to rename flat/recommended to
recommended when you no longer need to support the old config system.
However,
[`isLegacyConfig()`](https://github.com/eslint/rewrite/blob/main/packages/config-helpers/src/define-config.js#L73-L81)
(also see
[`eslintrcKeys`](https://github.com/eslint/rewrite/blob/main/packages/config-helpers/src/define-config.js#L24-L35))
function doesn't check for the `plugins` key, so our config was
incorrectly treated as flat config despite being in legacy format.
This PR fixes the issue, along with a few other fixes combined:
1. Convert `recommended` to flat config format
2. Separate basic rules (exhaustive-deps, rules-of-hooks) from compiler
rules
3. Add `recommended-latest-legacy` config for non-flat config users who
want all recommended rules (including compiler rules)
4. Adding more types for the exported config
Our shipped presets in 6.x.x will essentially be:
- `recommended-legacy`: legacy (non-flat), with basic rules only
- `recommended-latest-legacy`: legacy (non-flat), all rules (basic +
compiler)
- `flat/recommended`: flat, basic rules only (now the same as
recommended, but to avoid making a breaking change we'll just keep it
around in 6.x.x)
- `recommended-latest`: flat, all rules (basic + compiler)
- `recommended`: flat, basic rules only
In the next breaking release 7.x.x, we will collapse down the presets
into three:
- `recommended-legacy`: all recommended rules
- `recommended`: all recommended rules
- `recommended-experimental`: all recommended rules + new bleeding edge
experimental rules
Closes#34679
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34700).
* #34703
* __->__ #34700
This auto updates to select the last entry in the timeline until we make
the first selection. That way when new content loads in, we show the
last timeline of what is visible.
When we flush a Suspense boundary we might not flush the fallback
segment, it might only flush a placeholder instead. In this case the
segment can flush again but we do not want to flush the boundary itself
a second time. We now detach the boundary after flushing it.
better solution to: https://github.com/facebook/react/pull/34668
We're showing too much noise in the side-panel when selecting a Suspense
boundary. The interesting thing to see directly is the "Suspended by".
The "props" are mostly useless because the `"name"` prop is already in
the tree. I'm now also showing it in the title bar of the selected
element panel. The "children" and "fallback" props are just the thing
that you can see in the tree view anyway.
The "state" is this weird section with just one field in it, which we
already have duplicated in the top toolbar as well. We can just delete
this. I make sure to show the icon and a "suspended..." section while
the boundary is still loading but now yet resuspended by force
suspending.
While still loading:
<img width="600" height="193" alt="Screenshot 2025-09-27 at 11 54 37 PM"
src="https://github.com/user-attachments/assets/1c3f3a96-46e0-4b11-806f-032569c7d5b5"
/>
After loading:
<img width="602" height="266" alt="Screenshot 2025-09-27 at 11 54 53 PM"
src="https://github.com/user-attachments/assets/c43cc4cb-036f-4ced-9b0d-226c6320cd76"
/>
Resuspended after loading:
<img width="602" height="300" alt="Screenshot 2025-09-27 at 11 55 07 PM"
src="https://github.com/user-attachments/assets/0be01735-48a7-47dc-b5cf-e72ec71e0148"
/>
Rebased on #34454.
Always include the root in the timeline even if it has no unique
suspenders, since even if it won't suspend, we have to be able to see
that and step to one step before the next boundary to see the first
boundary that does suspend in its fallback state.
Also, if there's no current selection on initial mount, select the last
entry in the timeline. We usually do this with `selectedSuspenseID` but
that doesn't happen on initial load. So this does it on initial load if
nothing else is selected by then. That way when you reload you get the
initial root selected.
There's a problem here because we should really use one source of truth
and `selectedSuspenseID` doesn't really do anything now. Either it
should be its separate source of truth and you can't show components in
the side-panel or it should be derived from the other state.
If it's derived, once there's a selection, e.g. in the root, then even
if new timelines load it will never change but that's probably a good
thing.
This enables `@enablePreserveExistingMemoizationGuarantees` by default.
As of the previous PR (#34503), this mode now enables the following
behaviors:
- Treating variables referenced within a `useMemo()` or `useCallback()`
as "frozen" (immutable) as of the start of the call. Ie, the compiler
will assume that the values you reference are not mutated by the body of
the useMemo, not are they mutated later. Directly modifying them (eg
`var.property = true`) will be an error.
- Similarly, the results of the useMemo/useCallback are treated as
frozen (immutable) after the call.
These two rules match the behavior for other hooks: this means that
developers will see similar behavior to swapping out `useMemo()` for a
custom `useMyMemo()` wrapper/alias.
Additionally, as of #34503 the compiler uses information from the manual
dependencies to know which variables are non-nullable. Even if a useMemo
block conditionally accesses a nested property — `if (cond) { log(x.y.z)
}` — where the compiler would not usually know that `x` is non-nullable,
if the user specifies `x.y.z` as a manual dependency then the compiler
knows that `x` and `x.y` are non-nullable and can infer a more precise
dependency.
Finally, this mode also ensures that we always memoize function calls
that return primitives. See #34343 for more details.
For now, I've explicitly opted out of this feature in all test fixtures
where the behavior changed.
The `@enablePreserveExistingMemoizationGuarantees` mode can still fail
to preserve manual memoization due to mismtached dependencies.
Specifically, where the user's dependencies are more precise than the
compiler infers bc the compiler is being conservative about what might
be nullable. In this mode though we're intentionally using information
from the manual memoization and can also rely on the deps as a signal
for what's non-nullable.
The idea of the PR is that we treat manual memo deps just like other
inferred-as-non-nullable objects during PropagateScopeDeps. We're
careful to not treat the full path as non-nullable, only up to the last
property index. So `x.y.z` as a manual dep treats `x` and `x.y` as
non-nullable, allowing us to preserve a conditional dependency on
`x.y.z`.
Optionals within manual dependencies are a bit trickier and aren't
handled yet, but hopefully that's less common and something we can
improve in a follow-up. Not handling them just means that developers may
hit false positives on validating existing memoization if they use
optional chains in manual dependencies.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34503).
* #34689
* __->__ #34503
The View Transition docs were unclear about this but apparently the
`finished` promise never settles if the animation never started. So if
there's an error that rejects the `ready` promise, we'll never run the
clean up which can cause it to stall.
Fixes#34662.
However, ultimately that is caused by Chrome stalling our default
`onDefaultTransitionIndicator` but it should be unblocked after 10
seconds, not a minute.
Follow up to #34649. This adds the compiler rules back so they can be
opted-in 6.1.0, but aren't included in the presets as that would be a
breaking change.
Called Before:
> `logEvent` is a function created with React Hook "useEffectEvent", and
can only be called from the same component.
Called After:
> `logEvent` is a function created with React Hook "useEffectEvent", and
can only be called from Effects and Effect Events in the same component.
Referenced Before:
> `logEvent` is a function created with React Hook "useEffectEvent", and
can only be called from the same component. They cannot be assigned to
variables or passed down.
Referenced After:
> `logEvent` is a function created with React Hook "useEffectEvent", and
can only be called from Effects and Effect Events in the same component.
It cannot be assigned to a variable or passed down.
Reset EventTime when clearing timers. We need to track repeat updates
separately.
Typically we always reset all timers when we've logged an update. The
same update shouldn't be logged again.
I was trying to be clever and not reset the XEventTime because we also
need the timestamp to know if it's a repeat event. However, because of
this it looked like we had an event schedule an update even after we had
reset them.
This always resets the XEventTime to -1.1 and then stashes the old time
on EventRepeatTime which is our indication whether the next update was a
repeat of the old event.
---------
Co-authored-by: Ruslan Lesiutin <28902667+hoxyq@users.noreply.github.com>
Co-authored-by: Ricky <rickhanlonii@gmail.com>
Like in the diff below, we can read from the shared configuration to
check exhaustive deps.
I allow the classic additionalHooks configuration to override it so that
this change
is backwards compatible.
--
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34637).
* __->__ #34637
* #34497
We need to be able to specify additional effect hooks for the
RulesOfHooks lint rule
in order to allow useEffectEvent to be called by custom effects.
ExhaustiveDeps
does this with a regex suppplied to the rule, but that regex is not
accessible from
other rules.
This diff introduces a `react-hooks` entry you can put in the eslint
settings that
allows you to specify custom effect hooks and share them across all
rules.
This works like:
```
{
settings: {
'react-hooks': {
additionalEffectHooks: string,
},
},
}
```
The next diff allows useEffect to read from the same configuration.
----
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34497).
* #34637
* __->__ #34497
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
Added `<ViewTransition>` for when the "Show Internals" button is toggled
for a basic fade transition. Additionally added a transition for when
tabs are expanded in the advanced view of the Compiler Playground to
display a smoother show/hide animation.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
https://github.com/user-attachments/assets/c706b337-289e-488d-8cd7-45ff1d27788d
We've observed some scenarios, where cascading update happens in an
effect that was shorter than 0.05ms. In this case, this effect won't be
displayed on a timeline, because of the threshold that we are using, but
it would be shown in entry properties or in a stack trace.
To avoid confusion, we should always log such effects.
Validated via manually changing the threshold to 100ms+ and observing
that only effects that triggered an update are visible on a timeline.
Otherwise, when a context is propagated into an Activity (or Suspense)
this will leave work behind on the Offscreen component itself. Which
will cause an extra unnecessary render and commit pass just to figure
out that we're still defering it to idle.
This is because lazy context propagation, when calling to schedule some
work walks back up the tree all the way to the root. This is usually
fine for other nodes since they'll recompute their remaining child lanes
on the way up. However, for the Offscreen component we'll have already
computed it. We need to set it after propagation to ensure it gets
reset.
We selected the root. This means that we're currently viewing the
Transition that rendered the whole screen. In laymans terms this is
really "Initial Paint". Once we add subtree selection, then the
equivalent should be called "Transition" since in that case it's really
about a Transition within the page. So if you've selected an Activity
tree this should be called "Transition".
Once we add the environment support to the timeline. The first entry on
the timeline should also be called "Initial Paint" when you haven't
selected an Activity and "Transition" when you have.
Technically they're both meant to be "Transition" but nobody thinks of
initial load as a "Transition" from the previous MPA page.
<img width="1214" height="419" alt="Screenshot 2025-09-29 at 5 18 58 PM"
src="https://github.com/user-attachments/assets/cae263e3-133c-4fa9-9587-a7b2344199f4"
/>
If I can scroll the document due to it overflowing, I should be able to
scroll the suspense tab as much. The real rect for the root when it's
the document is really the full scroll height.
This doesn't fully eliminate the need to do recursive bounding boxes for
the root since it's still possible to have the rects overflow. E.g. if
they're currently resuspended or inside nested scrolls.
~However, maybe we should have the actual paintable root rect just be
this rectangle instead of including the recursive ones.~ Actually never
mind. The root really represents the Transition so it doesn't make sense
to give it any specific rectangle. It's rather the whole background.
This brings the Suspense boundary that's switching into view so that
when you play the loading sequence you can see how it plays out.
Otherwise it's really hard to find where things are changing.
This assumes we'll also scroll synchronize the suspense tab which will
bring it into view there too.
## Summary
Experimentation has completed for this at Meta and we've observed
positive impact on key React Native surfaces.
## How did you test this change?
yarn flow fabric
This was merged into the 19.1.1 patch release branch in
https://github.com/facebook/react/pull/33972 but we never upstreamed it
to main. This should merge to main to make it easier to sync versions to
RN after future releases.
---------
Co-authored-by: Riccardo Cipolleschi <cipolleschi@meta.com>
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
Utilized `<ViewTransition>` to introduce a sliding animation upon
switching between the Output and SourceMap tabs in the default
playground view.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
https://github.com/user-attachments/assets/1ac93482-8104-4f9a-887e-6adca3537dca
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
Introduced `<ViewTransition>` to the React Compiler Playground. Added an
initial animation on the config panel opening/closing to allow for a
smoother visual experience. Previously, the panel would flash in and out
of the screen upon open/close.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
https://github.com/user-attachments/assets/9dc77a6b-d4a5-4a7a-9d81-007ebb55e8d2
When you double click it will hide or show by jumping to the selected
index or one step before the selected.
Let's you go from a suspense boundary into the timeline to find its
position. I also highlight the step in the timeline when you hover the
rect.
This only works if it's in the selected root but all of those should be
merged into one single timeline.
One thing that's weird about the SuspenseNodes now is that they
sometimes gets deleted but not always when they're resupended. Nested
ones maybe? This means that if you double click to hide it, you can't
double click again to show it. This seems like an unrelated bug that we
should fix.
We could potentially repurpose the existing "Suspend" button in the
toolbar to do this too, or maybe add another icon there.
Stacked on #34625.
This is a nice way to step through the timeline and simulate the visuals
on screen as you do it. It's also convenient to step through one at a
time, especially with the forwards button.
However, the secondary purpose of this is that it helps anchor the UI
visually as something like a timeline like in a video so that the
timeline itself becomes more identifiable.
https://github.com/user-attachments/assets/cb367c8e-9efb-4a00-a58e-4579be20beb8
The settings dialog appears on all tabs and should be reachable from
Suspense tab too. It's a bit weird because it's not contextual to the
tab and it shows you whatever your last settings tab was opened. Maybe
it should default to opening to the current tab's settings?
There aren't any Suspense specific settings yet but there definitely
will be. We could move the "Show all" into settings but it might be
frequently that you want to check why something isn't suspending a
Suspense boundary or test SSR streaming.
However, the general settings still apply to the Suspense tab. E.g.
switching dark/light mode.
<img width="857" height="233" alt="Screenshot 2025-09-27 at 12 35 05 PM"
src="https://github.com/user-attachments/assets/4a38e94f-2074-4dce-906b-9a1c40bccb9b"
/>
When forcing suspense/error we're doing that by scheduling a sync update
on the fiber. Resuspending a Suspense boundary can only happen sync
update so that makes sense. Erroring also forces a sync commit. This
means that no View Transitions fire.
However, unsuspending (and dismissing an error dialog) can be async so
the reveal should be able to be async.
This adds another hook for scheduling using the Retry lane. That way
when you play through a reveal sequence of Suspense boundaries (like
playing through the timeline), it'll run the animations that would've
ran during a loading sequence.
It's possible for the children to overflow the bounding rect of the root
in general when they overflow in the DOM. However even when it doesn't
overflow in the DOM, the bounding rect of the root can shrink while the
content is suspended. In fact, it's very likely.
Originally I thought we didn't need to consider this recursively because
document scrolling takes absolute positioned content into account but
because we're using nested overflow scrolling, we have to manually
compute this.
One thing that always bothered me is that the collapse buttons on either
side of the toolbar looks like left/right buttons which would conflict
with some steps buttons I plan to add. Another issue is that we'll need
to add more tool buttons to the top and probably eventually a Search
field. Ideally this whole section should line up vertically with the
height of the title row.
I also realized that all UIs that have some kind of timeline control
(and play/pause/skip) do that in the bottom below the content. E.g.
music players and video players all do that. We're better off playing
into that structure since that's the UI analogy we're going for here.
Makes it clearer what the weird timeline is for.
By moving it to the bottom it also frees up the top for the collapse
buttons and more controls.
__Horizontal__
<img width="794" height="809" alt="Screenshot 2025-09-26 at 3 40 35 PM"
src="https://github.com/user-attachments/assets/dacad9c4-d52f-4b66-9585-5cc74f230e6f"
/>
__Vertical__
<img width="570" height="812" alt="Screenshot 2025-09-26 at 3 40 53 PM"
src="https://github.com/user-attachments/assets/db225413-849e-46f1-b764-8fbd08b395c4"
/>
As titled. This adds dev-only debugging information to Fizz / Flight
that could be used for tracking Promise's stack traces in "suspended by"
section of DevTools.
Bumps `useEffectEvent` from `@experimental` to `@canary`. Removes the
`experimental_` prefix from the export.
## TODO
- [ ] Update useEffectEvent reference page and Canary badging in docs:
https://github.com/reactjs/react.dev/pull/8025
Tracks the environment names of the I/O in each SuspenseNode and sent it
to the front end when the suspenders change.
In the front end, every child boundary should really be treated as it
has all environment names of the parents too since they're blocked by
the parent too. We could do this tracking on backend but if there's ever
one added on the root would need to be send for every child.
This lets us highlight which subtrees are blocked by content on the
server.
---------
Co-authored-by: Sebastian "Sebbie" Silbermann <silbermann.sebastian@gmail.com>
When there are no named Activities we should hide the tree side panel
(and the button to show it). Since it's not implemented yet there are
never any ones so it's always hidden.
In Fizz and Fiber we emit hints for suspensey images and CSS as soon as
we discover them during render. At the beginning of the stream. This
adds a similar capability when a Host Component is known to be a Host
Component during the Flight render.
The client doesn't know that these resources are in the payload until it
parses that particular component which is lazy. So they need to be
hoisted with hints. We detect when these are rendered during Flight and
add them as hints. That allows you to consume a Flight payload to
preload prefetched content without having to render it.
`<link rel="preload">` can be hoisted more or less as is.
`<link rel="stylesheet">` we preload but we don't actually insert them
anywhere until they're rendered. We do these even for non-suspensey
stylesheets since we know that when they're rendered they're going to
start loading even if they're not immediately used. They're never lazy.
`<img src>` we only preload if they follow the suspensey image pattern
since otherwise they may be more lazy e.g. by if they're in the
viewport. We also skip if they're known to be inside `<picture>`. Same
as Fizz. Ideally this would preload the other `<source>` but it's
tricky.
The downside of this is that you might conditionally render something in
only one branch given a client component. However, in that case you're
already eagerly fetching the server component's data in that branch so
it's not too much of a stretch that you want to eagerly fetch the
corresponding resources as well. If you wanted it to be lazy, you
should've done a lazy fetch of the RSC.
We don't collect hints when any of these are wrapped in a Client
Component. In those cases you might want to add your own preload to a
wrapper Shared Component.
Everything is skipped if it's known to be inside `<noscript>`.
Note that the format context is approximate (see #34601) so it's
possible for these hints to overfetch or underfetch if you try to trick
it. E.g. by rendering Server Components inside a Client Component that
renders `<noscript>`.
---------
Co-authored-by: Josh Story <josh.c.story@gmail.com>
There was a bug in the Compiler Playground related to the "Show
Internals" toggle due to a useEffect that was causing the tab names to
flicker from a rerender. Rewritten instead with a `<Suspense>` boundary
+ `use`.
Flight doesn't have any semantically sound notion of a parent context.
That's why we removed Server Context. Each root can really start
anywhere in the tree when you refetch subtrees. Additionally when you
dedupe elements they can end up in multiple different parent contexts.
However, we do have a DEV only version of this with debugTask being
tracked for the nearest parent element to track the context of
properties inside of it.
To apply certain DOM specific hints and optimizations when you render
host components we need some information of the context. This is usually
very local so doesn't suffer from the likelihood that you refetch in the
middle. We'll also only use this information for optimistic hints and
not hard semantics so getting it wrong isn't terrible.
```
<picture>
<img />
</picture>
<noscript>
<p>
<img />
</p>
</noscript>
```
For example, in these cases we should exclude preloading the image but
we have to know if that's the scope we're in.
We can easily get this wrong if they're split or even if they're wrapped
in client components that we don't know about like:
```
<NoScript>
<p>
<img />
</p>
</NoScript>
```
However, getting it wrong in either direction is not the end of the
world. It's about covering the common cases well.
We should favor outlining a boundary if it contains Suspensey CSS or
Suspensey Images since then we can load that content separately and not
block the main content. This also allows us to animate the reveal.
For example this should be able to animate the reveal even though the
actual HTML content isn't large in this case it's worth outlining so
that the JS runtime can choose to animate this reveal.
```js
<ViewTransition>
<Suspense>
<img src="..." />
</Suspense>
</ViewTransition>
```
For Suspensey Images, in Fizz, we currently only implement the suspensey
semantics when a View Transition is running. Therefore the outlining
only applies if it appears inside a Suspense boundary which might
animate. Otherwise there's no point in outlining. It is also only if the
Suspense boundary itself might animate its appear and not just any
ViewTransition. So the effect is very conservative.
For CSS it applies even without ViewTransition though, since it can help
unblock the main content faster.
This PR ensures that server components are reliably included in the
DevTools component tree, even if debug info is received delayed, e.g.
when using a debug channel. The fix consists of three parts:
- We must not unset the debug chunk before all debug info entries are
resolved.
- We must ensure that the "RSC Stream" IO debug info entry is pushed
last, after all other entries were resolved.
- We need to transfer the debug info from blocked element chunks onto
the lazy node and the element.
Ideally, we wouldn't even create a lazy node for blocked elements that
are at the root of the JSON payload, because that would basically wrap a
lazy in a lazy. This optimization that ensures that everything around
the blocked element can proceed is only needed for nested elements.
However, we also need it for resolving deduped references in blocked
root elements, unless we adapt that logic, which would be a bigger lift.
When reloading the Flight fixture, the component tree is now displayed
deterministically. Previously, it would sometimes omit synchronous
server components.
<img width="306" height="565" alt="complete"
src="https://github.com/user-attachments/assets/db61aa10-1816-43e6-9903-0e585190cdf1"
/>
---------
Co-authored-by: Sebastian Markbage <sebastian@calyptus.eu>
We previously always generated import statements for any modules that
had to be required, notably the `import {c} from
'react/compiler-runtime'` for the memo cache function. However, this
obviously doesn't work when the source is using commonjs. Now we check
the sourceType of the module and generate require() statements if the
source type is 'script'.
I initially explored using
https://babeljs.io/docs/babel-helper-module-imports, but the API design
was unfortunately not flexible enough for our use-case. Specifically,
our pipeline is as follows:
* Compile individual functions. Generate candidate imports,
pre-allocating the local names for those imports.
* If the file is compiled successfully, actually add the imports to the
program.
Ie we need to pre-allocate identifier names for the imports before we
add them to the program — but that isn't supported by
babel-helper-module-imports. So instead we generate our own require()
calls if the sourceType is script.
@eps1lon flagged this case. Inlined useCallback has an extra LoadLocal
indirection which caused us not to add a name. While I was there I added
some extra checks to make sure we don't generate names for a given node
twice (just in case).
Stacked on #34546.
Same as #34538 but for gestures.
Includes various fixes.
This shows how it ends with a Transition when you release in the
committed state. Note how the Animation of the Gesture continues until
the Transition is done so that the handoff is seamless.
<img width="853" height="134" alt="Screenshot 2025-09-20 at 7 37 29 PM"
src="https://github.com/user-attachments/assets/6192a033-4bec-43b9-884b-77e3a6f00da6"
/>
This helper weirdly doesn't include the sync lane.
Everywhere we use it we have to check the sync lane separately. We can
simplify things by simply including the sync lane.
This fixes a lack of optimization because we should not check the store
consistency for a `flushSync` render.
d91d28c8ba/packages/react-reconciler/src/ReactFiberHooks.js (L1691-L1693)
If there is a large owner stack, we could potentially spam multiple
fetch requests for the same source map. This adds a simple deduplication
logic, based on URL.
Also, this adds a timeout of 60 seconds to all fetch requests initiated
by fileFetcher content script.
The root instance doesn't have a canonical property so we were not
returning a public instance that we can call compareDocumentPosition on
when a Fragment had no other host parent in Fabric. In this case we need
to get the ReactNativeElement from the ReactNativeDocument.
I've also added test coverage for this case in DOM for consistency,
though it was already working there because we use DOM elements as root.
This same test will be copied to RN using Fantom.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
Added more tests for the compiler playground with the addition of the
new config editor and "Show Internals" button. Added testing to check
for incomplete store params in the URL, toggle functionality, and
correct errors showing for syntax/validation errors in the config
overrides.
Stacked on #34538.
Track the Task of the first ViewTransition that we detected as
animating. Use this as the Task as "Starting Animation", "Animating"
etc. That way you can see which ViewTransition spawned the Animation.
Although it's likely to be multiple.
<img width="757" height="393" alt="Screenshot 2025-09-19 at 10 19 18 PM"
src="https://github.com/user-attachments/assets/a6cdcb89-bd02-40ec-b3c3-11121c29e892"
/>
Stacked on #34522.
<img width="1025" height="200" alt="Screenshot 2025-09-19 at 6 37 28 PM"
src="https://github.com/user-attachments/assets/f25900f6-6503-48b1-876d-bd6697a29c6f"
/>
We already cover the time between "Starting Animation" and "Remaining
Effects" as "Animating". However, if the effects are forced then we can
still be animating after that. This fills in that gap.
This also fills in the gap if another render starts before the animation
finishes on the same track. It'll mark the blank space between the
previous render finishing and the next render starting as "Animating".
This should correspond roughly to the native "Animations" track.
Stacked on #34511.
We currently log all Suspended Commit as "Suspended on Images or CSS"
but it can really be other reasons too now. Like waiting on the previous
View Transition. This allows the host config configure this reason.
Now when one animation starts before another one finishes we log that as
"Waiting for the previous Animation".
<img width="592" height="257" alt="Screenshot 2025-09-17 at 11 53 45 PM"
src="https://github.com/user-attachments/assets/817af8b5-37ae-46d8-bfd1-cd3fc637f3f3"
/>
Triggering the "(Runtime) Publish Prereleases Manual" workflow with a
short git sha doesn't work. It needs the full sha. We might be able to
make it work with the short sha as well, but for now we can at least
document the restriction.
If we are referencing a lazy value that isn't explicitly lazy ($L...)
it's because we added it around an element that was blocked to be able
to defer things inside.
However, once that is unblocked we can start unwrap it and just use the
inner element instead for any future reference. The race condition is
still there since it's a race condition whether we added the wrapper in
the first place.
This just makes it consistent with unwrapping of the rest of the path.
If we don't handle Lazy types specifically in `renderDebugModel`, all of
their properties will be emitted using `renderDebugModel` as well. This
also includes its `_debugInfo` property, if the Lazy comes from the
Flight client. That array might contain objects that are deduped, and
resolving those references in the client can cause runtime errors, e.g.:
```
TypeError: Cannot read properties of undefined (reading '$$typeof')
```
This happened specifically when an "RSC stream" debug info entry, coming
from the Flight client through IO tracking, was emitted and its
`debugTask` property was deduped, which couldn't be resolved in the
client.
To avoid actually initializing a lazy causing a side-effect, we make
some assumptions about the structure of its payload, and only emit
resolved or rejected values, otherwise we emit a halted chunk.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
Made many small changes to the compiler playground to improve user
experience. Removed any "Loading" indicators that would flash in before
a component would finish loading in. Additionally, before users would
see the "Show Internals" button toggling from false to true if they had
set it at true previously. I was able to refactor the URL/local storage
loading so that the `Store` would be fully initialized before the
components would load in.
Attempted to integrate `<Activity>` into showing/hiding these different
editors, but the current state of [monaco
editors](https://github.com/suren-atoyan/monaco-react) does not allow
for this. I created an issue for them to address:
https://github.com/suren-atoyan/monaco-react/issues/753
Added a debounce to the config editor so every key type wouldn't cause
the output panel to respond instantly. Users can type for 500 ms before
an error is thrown at them.
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
## How did you test this change?
Here is what loading the page would look like before (not sure why its
so blurry):
https://github.com/user-attachments/assets/58f4281a-cc02-4141-b9b5-f70d6ace12a2
Here is how it looks now:
https://github.com/user-attachments/assets/40535165-fc7c-44fb-9282-9c7fa76e7d53
Here is the debouncing:
https://github.com/user-attachments/assets/e4ab29e4-1afd-4249-beca-671fb6542f5e
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
Stacked on #34510.
The "Commit" phase for a View Transition starts before the snapshot
phase (before mutation) and then stretches into the async gap of
`startViewTransition`, encompasses the mutation phase inside of its
update callback and finally the layout phase.
However, between the mutation phase and the layout phase we may suspend
the start of the view transition on fonts and/or images. In that case we
now split the Commit phase into first one before we suspend and then we
log "Waiting for Images and/or Fonts" and then another Commit phase
around the layout effects.
<img width="897" height="119" alt="Screenshot 2025-09-16 at 11 37 26 PM"
src="https://github.com/user-attachments/assets/0fe21388-bb48-4456-a594-62227d12d9b7"
/>
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
--> The React Compiler rejected a default parameter that contains a
TSInstantiationExpression with the todo message that the expression
cannot be safely reordered. This change teaches the reorder check in
BuildHIR.ts to treat TSInstantiationExpression as reorderable. This is
safe because TypeScript instantiation only affects types and is erased
at runtime, so it has no side effects and does not change semantics.
## How did you test this change?
```
Set-Content testfilter.txt 'ts-instantiation-default-param'
yarn test --filter --update
yarn test --filter
```
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
--> I added a fixture:
>
compiler/packages/babel-plugin-react-compiler/src/__tests__/fixtures/compiler/ts-instantiation-default-param.js
Some components accept a union of a ref callback function or ref object.
In this case we may infer the type as a function due to the presence of
invoking the ref callback function. In that case, we currently report a
"Hint: name `fooRef` as "ref" or with a "-Ref" suffix..." even though
the variable is already named appropriately — the problem is that we
inferred a non-ref type. So here we check the type and don't report this
hint if we inferred another type.
Stacked on #34509.
View Transitions introduces a bunch of new types of gaps in the commit
phase which needs to be logged differently in the performance track.
One thing that can happen is that a `flushSync` update forces the View
Transition to abort before it has started if it happens in the gap
before the transition is ready. In that case we log "Interrupted View
Transition".
Otherwise, when we're done in `startViewTransition` there's some work to
finalize the animations before the `ready` calllback. This is logged as
"Starting Animation".
Then there's a gap before the passive effects fire which we log as
"Animating". This can be long unless they're forced to flush early e.g.
due to another lane updating.
The "Animating" track should then pick up which doesn't do yet. This one
is tricky because this is after the actual commit phase and needs to be
interrupted by new renders which themselves can be suspended on the
animation finshing.
This PR is just a subset of all the cases. Will need a lot more work.
<img width="679" height="161" alt="Screenshot 2025-09-16 at 10 19 06 PM"
src="https://github.com/user-attachments/assets/0407372d-aaed-41f5-a262-059b2686ae87"
/>
This simplifies the logic for clamping the start times of various
phases. Instead of checking in multiple places I ensure we compute a
value for each phase that is then clamped to the next phase so they
don't overlap. If they're zero they're not printed.
I also added a name for all the anonymous labels. Those are mainly
fillers for sync work that should be quick but it helps debugging if we
can name them.
Finally the real fix is to update the clamp time which previously could
lead to overlapping entries for consecutive updates when a previous
update never finalized before the next update.
Calling setState functions during render can lead to extraneous renders
or even infinite loops. We also have runtime detection for loops, but
static detection is obviously even better.
This PR adds an option to infer identifers as setState functions if both
the following conditions are met:
- The identifier is named starting with "set"
- The identifier is used as the callee of a call expression
By inferring values as SetState type, this allows our existing
ValidateNoSetStateInRender rule to flag calls during render, disallowing
examples like the following:
```js
function Component({setParentState}) {
setParentState(...);
^^^^^^^^^^^^^^ Error: Cannot call setState in render
}
```
It turns out that View Transitions can sometimes overshoot and then we
need to ensure it fills. It can otherwise sometimes flash in Chrome.
This is something users might hit as well.
Stacked on #34486.
If we gave up on loading suspensey images for blocking the commit (e.g.
due to #34481), we can still block the view transition from committing
to allow an animation to include the image from the start.
At this point we have more information about the layout so we can
include only the images that are within viewport in the calculation
which may end up with a different answer.
This only applies when we attempt to run an animation (e.g. something
mutated inside a `<ViewTransition>` in a Transition). We could attempt a
`startViewTransition` if we gave up on the suspensey images just so that
we could block it even if no animation would be running.
However, this point the screen is frozen and you can no longer have sync
updates interrupt so ideally we would have already blocked the commit
from happening in the first place.
The reason to have two points where we block is that ideally we leave
the UI responsive while blocking, which blocking the commit does. In the
simple case of all images or a single image being within the viewport,
that's favorable. By combining the techniques we only end up freezing
the screen in the special case that we had a lot of images added outside
the viewport and started an animation with some image inside the
viewport (which presumably is about to finish anyway).
Stacked on #34481.
We currently track the suspended state temporarily with a global which
is safe as long as we always read it during a sync pass. However, we
sometimes read it in closures and then we have to be carefully to pass
the right one since it's possible another commit on a different root has
started at that point. This avoids this footgun.
Another reason to do this is that I want to read it in
`startViewTransition` which is in an async gap after which point it's no
longer safe. So I have to pass that through the `commitRoot` bound
function.
Stacked on #34478.
In general we don't like to deal with timeouts in suspense world. We've
had that in the past but in general it doesn't work well because if you
have a timeout and then give up you made everything wait longer for no
benefit at the end. That's why the recommendation is to remove a
Suspense boundary if you expect it to be fast and add one if you expect
it to be slow. You have to estimate as the developer.
Suspensey images suffer from this same problem. We want to apply
suspensey images to as much as possible so that it's the default to
avoid flashing because if just a few images flash it's still almost as
bad as all of them. However, we do know that it's also very common to
use images and on a slow connection or many images, it's not worth it so
we have the timeout to eventually give up.
However, this means that in cases that are always slow or connections
that are always slow, you're always punished for no reason.
Suspensey images is mainly a polish feature to make high end experiences
on high end connections better but we don't want to unnecessarily punish
all slow connections in the process or things like lots of images below
the viewport.
This PR adds an estimate for whether or not we'll likely be able to load
all the images within the timeout on a high end enough connection. If
not, we'll still do a short suspend (unless we've already exceeded the
wait time adjusted for #34478) to allow loading from cache if available.
This estimate is based on two heuristics:
1) We compute an estimated bandwidth available on the current device in
mbps. This is computed from performance entries that have loaded static
resources already on the site. E.g. this can be other images, css, or
scripts. We see how long they took. If we don't have any entries (or if
they're all cross-origin in Safari) we fallback to
`navigator.connection.downlink` in Chrome or a 5mbps default in
Firefox/Safari.
2) To estimate how many bytes we'll have to download we use the
width/height props of the img tag if available (or a 100 pixel default)
times the device pixel ratio. We assume that a good img implementation
downloads proper resolution image for the device and defines a
width/height up front to avoid layout trash. Then we estimate that it
takes about 0.25 bytes per pixel which is somewhat conservative
estimate.
This is somewhat conservative given that the image could've been
preloaded and be better compressed.
So it really only kicks in for high end connections that are known to
load fast.
In a follow up, we can add an additional wait for View Transitions that
does the same estimate but only for the images that turn out to be in
viewport.
Currently suspensey images doesn't account for how long we've already
been waiting. This means that you can for example wait for 300ms for the
throttle + 500ms for the images. If a Transition takes a while to
complete you can also wait that time + an additional 500ms for the
images.
This tracks the start time of a Transition so that we can count the
timeout starting from when the user interacted or when the last fallback
committed (which is where the 300ms throttle is computed from). Creating
a single timeline.
This also moves the timeout to a central place which I'll use in a
follow up.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
Added an "Applied Configs" section under the Config Overrides panel.
Users will now be able to see the full list of configs applied to the
compiler in the playground. Adds greater discoverability for config
options to override as well. Updated the default config as well to be a
commented config option, so users will start with empty overrides.
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
## How did you test this change?
https://github.com/user-attachments/assets/1a57b2d5-0405-4fc8-9990-1747c30181c0
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
## Overview
This PR ships `<Activity />` to the `react@canary` release channel for
final feedback and prepare for semver stable release.
## What this means
Shipping `<Activity />` to canary means it has gone through extensive
testing in production, we are confident in the stability of the feature,
and we are preparing to release it in a future semver stable version.
Libraries and frameworks following the [Canary
Workflow](https://react.dev/blog/2023/05/03/react-canaries) should begin
implementing and testing the feature.
## Why we follow the Canary Workflow
To prepare for semver stable, libraries should test canary features like
`<Activity>` with `react@canary` to confirm compatibility and prepare
for the next semver release in a myriad of environments and
configurations used throughout the React ecosystem. This provides
libraries with ample time to catch any issues we missed before slamming
them with problems in the wider semver release.
Since these features have already gone through extensive production
testing, and we are confident they are stable, frameworks following the
[Canary Workflow](https://react.dev/blog/2023/05/03/react-canaries) can
also begin adopting canary features like `<Activity />`.
This adoption is similar to how different Browsers implement new
proposed browser features before they are added to the standard. If a
frameworks adopts a canary feature, they are committing to stability for
their users by ensuring any API changes before a semver stable release
are opaque and non-breaking to their users.
Apps not using a framework are also free to adopt canary features like
Activity as long as they follow the [Canary
Workflow](https://react.dev/blog/2023/05/03/react-canaries), but we
generally recommend waiting for a semver stable release unless you have
the capacity to commit to following along with the canary changes and
debugging library compatibility issues.
Waiting for semver stable means you're able to benefit from libraries
testing and confirming support, and use semver as signal for which
version of a library you can use with support of the feature.
## Docs
Check out the ["React Labs: View Transitions, Activity, and
more"](https://react.dev/blog/2025/04/23/react-labs-view-transitions-activity-and-more#activity)
blog post, and [the new docs for
`<Activity>`](https://react.dev/reference/react/Activity) for more info.
## TODO
- [x] Bump Activity docs to Canary
https://github.com/reactjs/react.dev/pull/7974
---------
Co-authored-by: Sebastian Sebbie Silbermann <sebastian.silbermann@vercel.com>
When we report an error we typically log the owner stack of the thing
that caught the error. Similarly we restore the `console.createTask`
scope of the catching component when we call `reportError` or
`console.error`.
We also have a special case if something throws during reconciliation
which uses the Server Component task as far as we got before we threw.
https://github.com/facebook/react/blob/main/packages/react-reconciler/src/ReactChildFiber.js#L1952-L1960
Chrome has since fixed it (on our request) that the Error constructor
snapshots the Task at the time the constructor was created and logs that
in `reportError`. This is a good thing since it means we get a coherent
stack. Unfortunately, it means that the fake Errors that we create in
Flight Client gets a snapshot of the task where they were created so
when they're reported in the console they get the root Task instead of
the Task of the handler of the error.
Ideally we'd transfer the Task from the server and restore it. However,
since we don't instrument the Error object to snapshot the owner and we
can't read the native Task (if it's even enabled on the server) we don't
actually have a correct snapshot to transfer for a Server Component
Error. However, we can use the parent's task for where the error was
observed by Flight Server and then encode that as a pseudo owner of the
Error.
Then we use this owner as the Task which the Error is created within.
Now the client snapshots that Task which is reported by `reportError` so
now we have an async stack for Server Component errors again. (Note that
this owner may differ from the one observed by `captureOwnerStack` which
gets the nearest Server Component from where it was caught. We could
attach the owner to the Error object and use that owner when calling
`onCaughtError`/`onUncaughtError`).
Before:
<img width="911" height="57" alt="Screenshot 2025-09-10 at 10 57 54 AM"
src="https://github.com/user-attachments/assets/0446ef96-fad9-4e17-8a9a-d89c334233ec"
/>
After:
<img width="910" height="128" alt="Screenshot 2025-09-10 at 11 06 20 AM"
src="https://github.com/user-attachments/assets/b30e5892-cf40-4246-a588-0f309575439b"
/>
Similarly, there are Errors and warnings created by ChildFiber itself.
Those execute in the scope of the general render of the parent Fiber.
They used to get the scope of the nearest client component parent (e.g.
div in this case) but that's the parent of the Server Component. It
would be too expensive to run every level of reconciliation in its own
task optimistically, so this does it only when we know that we'll throw
or log an error that needs this context. Unfortunately this doesn't
cover user space errors (such as if an iterable errors).
Before:
<img width="903" height="298" alt="Screenshot 2025-09-10 at 11 31 55 AM"
src="https://github.com/user-attachments/assets/cffc94da-8c14-4d6e-9a5b-bf0833b8b762"
/>
After:
<img width="1216" height="252" alt="Screenshot 2025-09-10 at 11 50
54 AM"
src="https://github.com/user-attachments/assets/f85f93cf-ab73-4046-af3d-dd93b73b3552"
/>
<img width="412" height="115" alt="Screenshot 2025-09-10 at 11 52 46 AM"
src="https://github.com/user-attachments/assets/a76cef7b-b162-4ecf-9b0a-68bf34afc239"
/>
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
Updated the UI of the React compiler playground. The config, Input, and
Output panels will now span the viewport width when "Show Internals" is
not toggled on. When "Show Internals" is toggled on, the old vertical
accordion tabs are still used. Going to add support for the "Applied
Configs" tabs underneath the "Config Overrides" tab next.
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
## How did you test this change?
https://github.com/user-attachments/assets/b8eab028-f58c-4cb9-a8b2-0f098f2cc262
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
Requiring DevTools to be present for dev builds seems like an overkill,
let's enable the instrumentation by default.
Nothing changes for profiling or production artifacts.
When we emit objects of type `ReactAsyncInfo`, we need to make sure that
their owners are outlined, using `outlineComponentInfo`. Otherwise we
would end up accidentally emitting stashed fields that are not part of
the transport protocol, specifically `debugStack`, `debugTask`, and
`debugLocation`. This would lead to runtime errors in the client, when
for example, the stack for a `debugLocation` is processed in
`buildFakeCallStack`, but the stack was actually omitted from the RSC
payload, because for those fields we don't ensure that the object limit
is increased by the length of the stack, as we do when we're emitting
the `stack` of a `ReactComponentInfo` object in `outlineComponentInfo`.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
Removed the old `OVERRIDE` pragma to make the source of truth for config
overrides in the left-hand pane. Now, it will automatically update the
output pane each time there is an edit to the config. The old pragma
format is still supported, but it will be overwritten by the config pane
if they are modifying the same flags. Removed the gating on the config
panel so now all users will automatically be able to view it, but it
will be initially collapsed.
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
## How did you test this change?
https://github.com/user-attachments/assets/9d4512b9-e203-4ce0-ae95-dd96ff03bbc1
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
Two small QoL improvements inspired by feedback:
* `if (ref.current === undefined) { ref.current = ... }` is now allowed.
* `if (!ref.current) { ref.current = ... }` is still disallowed, but we
emit an extra hint suggesting the `if (!ref.current == null)` pattern.
I was on the fence about the latter. We got feedback asking to allow `if
(!ref.current)` but if your ref stores a boolean value then this would
allow reading the ref in render. The unary form is also less precise in
general due to sketchy truthiness conversions. I figured a hint is a
good compromise.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34449).
* __->__ #34449
* #34424
@stipsan found this issue where the compiler would bailout on the
`useLayoutEffect` examples in the React docs. While setState in an
effect is typically an anti-pattern due to the fact that it hurts
performance through cascading renders, the one scenario where it _is_
allowed is if the value being set flows from a ref.
When the search query changes, we kick off a transition that updates the
search query in a reducer for TreeContext. The search input is also
using this value for an `input` HTML element.
For a larger applications, sometimes there is a noticeable delay in
displaying the updated search query. This changes the approach to also
keep a local synchronous state that is being updated on a change
callback.
Stacked on #34435.
This adds a method to get all suspended by filtered by a specific
Instance. The purpose of this is to power the feature when you filter by
Activity. This would show you the "root" within that Activity boundary.
This works by selecting the nearest Suspense boundary parent and then
filtering its data based on if all the instances for a given I/O info is
within the Activity instance. If something suspended within the Suspense
boundary but outside the Activity it's not included even if it's also
suspending inside the Activity since we assume it would've already been
loaded then.
Right now I wire this up to be a special case when you select an
Activity boundary same as when you select a Suspense boundary in the
Components tab but we could also only use this when you select the root
in the Suspense tab for example.
Stacked on #34425.
RSC stream info is split into one I/O entry per chunk. This means that
when a single instance or boundary depends on multiple chunks, it'll
show the same stream multiple times. This makes it so just the last one
is shown.
This is a special case for the name "RSC stream" but ideally we'd more
explicitly model the concept of awaiting only part of a stream.
<img width="667" height="427" alt="Screenshot 2025-09-09 at 2 09 43 PM"
src="https://github.com/user-attachments/assets/890f6f61-4657-4ca9-82fd-df55a696bacc"
/>
Another remaining issue is that it's possible for an intermediate chunk
to be depended on by just a child boundary. In that case that can be
considered a "unique suspender" even though the parent depends on a
later one. Ideally it would dedupe on everything below. Could also model
it as every Promise depends on its chunk and every previous chunk.
Fixes#34098.
There's an issue in Chrome where the `InvalidStateError` always has the
same error message. The spec doesn't specify the error message to use
but it's more useful to have a specific one for each case like Safari
does.
One reason it's better to have a specific error message is because the
browser console is not the main surface that people look for errors.
Chrome relies on a separate log also in the console. Frameworks has
built-in error dialogs that pop up first and that's where you see the
error and that dialog can't show something specific. Additionally, these
errors can't log something specific to servers in production logging. So
this is a bad strategy.
It's not good to have those error dialogs pop up for non-actionable
errors like when it doesn't start because the document was hidden. Since
we don't have more specific information we have no choice but to hide
all of them. This includes actionable things like duplicate names
(although we also have a React specific warning for that in the common
case).
This is exported in the prod version of ReactServer experimental but not
the development version so we can't use it in fixtures from Server
Components.
This was fun. We previously added the MaybeAlias effect in #33984 in
order to describe the semantic that an unknown function call _may_ alias
its return value in its result, but that we don't know this for sure. We
record mutations through MaybeAlias edges when walking backward in the
data flow graph, but downgrade them to conditional mutations. See the
original PR for full context.
That change was sufficient for the original case like
```js
const frozen = useContext();
useEffect(() => {
frozen.method().property = true;
}, [...]);
```
But it wasn't sufficient for cases where the aliasing occured between
operands:
```js
const dispatch = useDispatch();
<div onClick={(e) => {
dispatch(...e.target.value)
e.target.value = ...;
}} />
```
Here we would record a `Capture dispatch <- e.target` effect. Then
during processing of the `event.target.value = ...` assignment we'd
eventually _forward_ from `event` to `dispatch` (along a MaybeAlias
edge). But in #33984 I missed that this forward walk also has to
downgrade to conditional.
In addition to that change, we also have to be a bit more precise about
which set of effects we create for alias/capture/maybe-alias. The new
logic is a bit clearer, I think:
* If the value is frozen, it's an ImmutableCapture edge
* If the values are mutable, it's a Capture
* If it's a context->context, context->mutable, or mutable->context,
count it as MaybeAlias.
One thing that can suspend is the downloading of the RSC stream itself.
This tracks an I/O entry for each Promise (`SomeChunk<T>`) that
represents the request to the RSC stream. As the value we use the
`Response` for `createFromFetch` (or the `ReadableStream` for
`createFromReadableStream`). The start time is when you called those.
Since we're not awaiting the whole stream, each I/O entry represents the
part of the stream up until it got unblocked. However, in a production
environment with TLS packets and buffering in practice the chunks
received by the client isn't exactly at the boundary of each row. It's a
bit longer into larger chunks. From testing, it seems like multiples of
16kb or 64kb uncompressed are common. To simulate a production
environment we group into roughly 64kb chunks if they happen in rapid
sequence. Note that this might be too small to give a good idea because
of the throttle many boundaries might be skipped anyway so this might
show too many.
The React DevTools will see each I/O entry as separate but dedupe if an
outer boundary already depends on the same chunk. This deduping makes it
so that small boundaries that are blocked on the same chunk, don't get
treated as having unique suspenders. If you have a boundary with large
content, then that content will likely be in a separate chunk which is
not in the parent and then it gets marked as.
This is all just an approximation. The goal of this is just to highlight
that very large boundaries will very likely suspend even if they don't
suspend on any I/O on the server. In practice, these boundaries can
float around a lot and it's really any Suspense boundary that might
suspend but some are more likely than others which this is meant to
highlight.
It also just lets you inspect how many bytes needs to be transferred
before you can show a particular part of the content, to give you an
idea that it's not just I/O on the server that might suspend.
If you don't use the debug channel it can be misleading since the data
in development mode stream will have a lot more data in it which leads
to more chunking.
Similarly to "client references" these I/O infos don't have an "env"
since it's the client that has the I/O and so those are excluded from
flushing in the Server performance tracks.
Note that currently the same Response can appear many times in the same
Instance of SuspenseNode in DevTools when there are multiple chunks. In
a follow up I'll show only the last one per Response at any given level.
Note that when a separate debugChannel is used it has its own I/O entry
that's on the `_debugInfo` for the debug chunks in that channel.
However, if everything works correctly these should never leak into the
DevTools UI since they should never be propagated from a debug chunk to
the values waited by the runtime. This is easy to break though.
The previous PR added name hints for anonymous functions, but didn't
handle the case of outlined functions. Here we do some cleanup around
function `id` and name hints:
* Make `HIRFunction.id` a ValidatedIdentifierName, which involved some
cleanup of the validation helpers
* Add `HIRFunction.nameHint: string` as a place to store the generated
name hints which are not valid identifiers
* Update Codegen to always use the `id` as the actual function name, and
only use nameHint as part of generating the object+property wrapper for
debug purposes.
This ensures we don't conflate synthesized hints with real function
names. Then, we also update OutlineFunctions to use the function name
_or_ the nameHint as the input to generating a unique identifier. This
isn't quite as nice as the object form since we lose our formatting, but
it's a simple step that gives more context to the developer than `_temp`
does.
Switching to output the object+property lookup form for outlined
functions is a bit more involved, let's do that in a follow-up.
Alternative to #34276
---
(Summary taken from @josephsavona 's #34276)
Partial fix for #34262. Consider this example:
```js
function useInputValue(input) {
const object = React.useMemo(() => {
const {value} = transform(input);
return {value};
}, [input]);
return object;
}
```
React Compiler breaks this code into two reactive scopes:
* One for `transform(input)`
* One for `{value}`
When we run ValidatePreserveExistingMemo, we see that the scope for
`{value}` has the dependency `value`, whereas the original memoization
had the dependency `input`, and throw an error that the dependencies
didn't match.
In other words, we're flagging the fact that memoized _better than the
user_ as a problem. The more complete solution would be to validate that
there is a subgraph of reactive scopes with a single input and output
node, where the input node has the same dependencies as the original
useMemo, and the output has the same outputs. That is true in this case,
with the subgraph being the two consecutive scopes mentioned above.
But that's complicated. As a shortcut, this PR checks for any
dependencies that are defined after the start of the original useMemo.
If we find one, we know that it's a case where we were able to memoize
more precisely than the original, and we don't report an error on the
dependency. We still check that the original _output_ value is able to
be memoized, though. So if the scope of `object` were extended, eg with
a call to `mutate(object)`, then we'd still correctly report an error
that we couldn't preserve memoization.
Co-authored-by: Joe Savona <joesavona@fb.com>
Eslint is expecting a map of [string] => RuleModule. Before we were
passing {rule: RuleModule, severity: ErrorSeverity} which was breaking
legacy Eslint configurations
Adds a `@enableNameAnonymousFunctions` feature to infer helpful names
for anonymous functions within components and hooks. The logic is
inspired by a custom Next.js transform, flagged to us by @eps1lon, that
does something similar. Implementing this transform within React
Compiler means that all React (Compiler) users can benefit from more
helpful names when debugging.
The idea builds on the fact that JS engines try to infer helpful names
for anonymous functions (in stack traces) when those functions are
accessed through an object property lookup:
```js
({'a[xyz]': () => {
throw new Error('hello!')
} }['a[xyz]'])()
// Stack trace:
Uncaught Error: hello!
at a[xyz] (<anonymous>:1:26) // <-- note the name here
at <anonymous>:1:60
```
The new NameAnonymousFunctions transform is gated by the above flag,
which is off by default. It attemps to infer names for functions as
follows:
First, determine a "local" name:
* Assigning a function to a named variable uses the variable name.
`const f = () => {}` gets the name "f".
* Passing the function as an argument to a function gets the name of the
function, ie `foo(() => ...)` get the name "foo()", `foo.bar(() => ...)`
gets the name "foo.bar()". Note the parenthesis to help understand that
it was part of a call.
* Passing the function to a known hook uses the name of the hook,
`useEffect(() => ...)` uses "useEffect()".
* Passing the function as a JSX prop uses the element and attr name, eg
`<div onClick={() => ...}` uses "<div>.onClick".
Second, the local name is combined with the name of the outer
component/hook, so the final names will be strings like `Component[f]`
or `useMyHook[useEffect()]`.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34410).
* #34434
* __->__ #34410
Each integrator: browser extension, Chrome DevTools Frontend fork,
Electron shell must define and provide `fetchFileWithCaching` in order
for DevTools to be able to fetch application resources, such as scripts
or source maps.
More specifically, if this is available, React DevTools will be able to
symbolicate source locations for component frames, owner stacks,
"suspended by" Promises call frames.
This will be available with the next release of React DevTools.
The compiler playground was crashing at any small syntax errors in the
`Input` panel due to updating the `CompilerErrorDetailOptions` type in
#34401. Updated the option to take in a `ErrorCategory` instead.
---------
Co-authored-by: lauren <poteto@users.noreply.github.com>
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
Added a "Show Internals" toggle switch to either show only the Config,
Input, Output, and Source Map tabs, or these tabs + all the additional
compiler options. The open/close state of these tabs will be preserved
(unless on page refresh, which is the same as the currently
functionality).
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
https://github.com/user-attachments/assets/8eb0f69e-360c-4e9b-9155-7aa185a0c018
Adds missing locations to all the statement kinds that we produce in
codegenInstruction(), and adds generic handling of source locations for
the nodes produced by codegenInstructionValue(). There are definitely
some places where we are still missing a location, but this should
address some of the known issues we've seen such as missing location on
`throw`.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34406).
* #34394
* __->__ #34406
* #34346
Small fix to make all descriptions consistently printed with a single
period at the end.
Ran `grep -rn "description:" packages/babel-plugin-react-compiler/src
--include="*.ts" --exclude-dir="__tests__" | grep '\.\s*["\`]'` to find
all descriptions ending in a period and manually fixed them.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34404).
* #34409
* __->__ #34404
Now that we have a new CompilerDiagnostic type (which the CompilerError
aggregate can hold), the old CompilerErrorDetail type can be marked as
deprecated. Eventually we should migrate everything to the new
CompilerDiagnostic type.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34402).
* #34409
* #34404
* #34403
* __->__ #34402
* #34401
With #34176 we now have granular lint rules created for each compiler
ErrorCategory. However, we had remnants of our old error severities
still in use which makes reporting errors quite clunky. Previously you
would need to specify both a category and severity which often ended up
being the same.
This PR moves severity definition into our rules which are generated
from our categories. For now I decided to defer "upgrading" categories
from a simple string to a sum type since we are only using severities to
map errors to eslint severity.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34401).
* #34409
* #34404
* #34403
* #34402
* __->__ #34401
### Problem
- Users encounter “Failed to construct 'URL': Invalid base URL” when
clicking the “View source” action in DevTools if the underlying base URL
is invalid.
- This exception originates from `new URL(relative, base)` and bubbles
up, interrupting the DevTools UI.
- Fixes GitHub issue
[#34317](https://github.com/facebook/react/issues/34317)
### Solution
- Wrap URL construction to:
- First try `new URL(sourceMapAt, sourceURL)`.
- If that fails, try `new URL(sourceMapAt)` as an absolute URL.
- If both fail, return `null` (no symbolication) rather than throwing.
- This preserves normal behavior for valid bases and absolute URLs,
while avoiding crashes for invalid bases.
### Implementation details
- Updated `symbolicateSource` in
`packages/react-devtools-shared/src/symbolicateSource.js` to handle
invalid base URL scenarios without throwing.
- Added/verified tests in
`packages/react-devtools-shared/src/__tests__/utils-test.js`:
- “should not throw for invalid base URL with relative source map” →
resolves to `null`.
- “should resolve absolute source map even if base URL is invalid” →
still resolves correctly.
### Test plan
- Lint/format:
- `yarn prettier-check`
- `yarn linc`
- Type checking:
- `yarn flow dom-node`
- Unit tests:
- `yarn test --watchAll=false utils-test`
- Optionally: `yarn test --watchAll=false utils-test inspectedElement`
- All of the above pass locally for experimental channel.
### Risks and rollout
- Risk: Low. Only affects cases where the base URL is invalid.
- Normal cases (valid base or absolute `sourceMappingURL`) are
unchanged.
- No user-facing API changes; DevTools UX becomes more resilient.
### Affected packages
- `react-devtools-shared`
### Related
- Fixes GitHub issue
[#34317](https://github.com/facebook/react/issues/34317)
### Checklist
- [x] Ran `yarn prettier-check`
- [x] Ran `yarn linc`
- [x] Ran `yarn flow dom-node`
- [x] Relevant unit tests passing
- [x] Linked issue and added a concise summary
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
Part 3 of adding a "Config Override" panel to the React compiler
playground. Added a button to apply config changes to the Input panel,
as well as making the tab collapsible. Added validation for the the
PluginOptions type (although comes with a bit more boilerplate) to make
it very obvious what the possible config errors could be. Added some
toasts for trying to apply broken configs.
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
## How did you test this change?
https://github.com/user-attachments/assets/63ab8636-396f-45ba-aaa5-4136e62ccccc
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
I tried turning on `@enablePreserveExistingMemoizationGuarantees` by
default and cleaned up a couple small things:
* We emit freeze calls for StartMemoize deps but these had
ValueReason.Other so the message wasn't great. We now treat these like
other hook arguments.
* PruneNonEscapingScopes was being too aggressive in this mode and
memoizing even loads of globals. Switching to
MemoizationLevel.Conditional ensures we build a graph that connects
through to primitive-returning function calls, but doesn't unnecessarily
force memoization otherwise.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34346).
* #34347
* __->__ #34346
`@enablePreserveExistingMemoizationGuarantees` mode currently does not
guarantee memoization of primitive-returning functions. We're often able
to infer that a function returns a primitive based on how its result is
used, for example `foo() + 1` or `object[getIndex()]`, and by default we
do not currently memoize computation that produces a primitive. The
reasoning behind this is that the compiler is primarily focused on
stopping cascading updates — it's fine to recompute a primitive since we
can cheaply compare that primitive and avoid unnecessary downstream
recomputation. But we've gotten a lot of feedback that people find this
surprising, and that sometimes the computation can be expensive enough
that it should be memoized.
This PR changes `@enablePreserveExistingMemoizationGuarantees` mode to
ensure that primitive-returning functions get memoized. Other modes will
not memoize these functions. Separately from this we are considering
enabling this mode by default.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34343).
* #34347
* #34346
* __->__ #34343
* #34335
Fixes#34108. If a scope ends with with a conditional where some/all
branches exit via labeled break, we currently compile in a way that
works but bypasses memoization. We end up with a shape like
```js
let t0;
label: {
if (changed) {
...
if (cond) {
t0 = ...;
break label;
}
// we don't save the output if the break happens!
t0 = ...;
$[0] = t0;
} else {
t0 = $[0];
}
```
The fix here is to update AlignReactiveScopesToBlockScopes to take
account of breaks that don't go to the natural fallthrough. In this
case, we take any active scopes and extend them to start at least as
early as the label, and extend at least to the label fallthrough. Thus
we produce the correct:
```js
let t0;
if (changed) {
label: {
...
if (cond) {
t0 = ...;
break label;
}
t0 = ...;
}
// now the break jumps here, and we cache the value
$[0] = t0;
} else {
t0 = $[0];
}
```
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34335).
* #34347
* #34346
* #34343
* __->__ #34335
Fixes a bug in useDeferredValue's optional `initialValue` argument. In
the regression case, if a new useDeferredValue hook is mounted while an
earlier transition is suspended, the `initialValue` argument of the new
hook was ignored. After the fix, the `initialValue` argument is
correctly rendered during the initial mount, regardless of whether other
transitions were suspended.
The culprit was related to the mechanism we use to track whether a
render is the result of a `useDeferredValue` hook: we assign the
deferred lane a TransitionLane, then entangle that lane with the
DeferredLane bit. During the subsequent render, we check for the
presence of the DeferredLane bit to determine whether to switch to the
final, canonical value.
But because transition lanes can themselves become entangled with other
transitions, the effect is that every entangled transition was being
treated as if it were the result of a `useDeferredValue` hook, causing
us to skip the initial value and go straight to the final one.
The fix I've chosen is to reserve some subset of TransitionLanes to be
used only for deferred work, instead of using entanglement. This is
similar to how retries are already implemented. Originally I tried not
to implement it this way because it means there are now slightly fewer
lanes allocated for regular transitions, but I underestimated how
similar deferred work is to retries; they end up having a lot of the
same requirements. Eventually it may be possible to merge the two
concepts.
React Native doesn't support `console.createTask` yet, but it does
support `performance.measure` and extensibility APIs for Performance
panel, including `detail.devtools` field.
Previously, this logic was gated with `if (__DEV__ && debugTask)`, now
`debugTask` is no longer required to log render. If there is no console
task, we will just call `performance.measure(...)`. The same pattern is
used in other reporters.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
Part 2 of adding a "Config Override" panel to the React compiler
playground. Added sync from the config editor (still only accessible
with the "showConfig" param) to the main source code editor. Adding a
valid config to the editor will add/replace the `@OVERRIDE` pragma above
the source code. Additionally refactored the old implementation to
remove `useEffect`s and unnecessary renders.
Realized upon testing that the user experience is quite jarring,
planning to add a `sync` button in the next PR to fix this.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
https://github.com/user-attachments/assets/a71b1b5f-0539-4c00-8d5c-22426f0280f9
Small follow-up to #34350. The `_store` property is now only assigned in
development mode when creating lazy types. It also uses the `validated`
value that was passed to `createElement`, if applicable.
When the debug channel was already closed, we must not try to close it
again when the Response gets garbage collected.
**Test plan:**
1. reduce the Flight fixture `App` component to a minimum [^1]
- remove everything from `<body>`
- delete the `console.log` statement
2. open the app in Firefox (seems to have a more aggressive GC strategy)
3. wait a few seconds
On `main`, you will see the following error in the browser console:
```
TypeError: Can not close stream after closing or error
```
With this change, the error is gone.
[^1]: It's a bit concerning that step 1 is needed to reproduce the
issue. Either GC is behaving differently with the unmodified App, or we
may hold on to the Response under certain conditions, potentially
creating a memory leak. This needs further investigation.
The `WebSocketStream` implementation seems to be a bit unreliable. We've
seen `Cannot close a ERRORED writable stream` errors when expanding the
logged deep object, for example. And when reducing the fixture to a
minimal app, we even get `Connection closed` errors, because the web
socket connection is closed before all debug chunks are sent.
We can improve the reliability of the web socket connection by using a
normal `WebSocket` instance on the client, along with manually creating
a `WritableStream` and a `ReadableStream` for processing the messages.
As an additional benefit, the debug channel now also works in Firefox
and Safari.
On the server, we're simplifying the integration with the Express server
a bit by utilizing the `server` property for `WebSocket.Server`, instead
of the `noServer` property with the manual upgrade handling.
A few libraries are known to be incompatible with memoization, whether
manually via `useMemo()` or via React Compiler. This puts us in a tricky
situation. On the one hand, we understand that these libraries were
developed prior to our documenting the [Rules of
React](https://react.dev/reference/rules), and their designs were the
result of trying to deliver a great experience for their users and
balance multiple priorities around DX, performance, etc. At the same
time, using these libraries with memoization — and in particular with
automatic memoization via React Compiler — can break apps by causing the
components using these APIs not to update. Concretely, the APIs have in
common that they return a function which returns different values over
time, but where the function itself does not change. Memoizing the
result on the identity of the function will mean that the value never
changes. Developers reasonable interpret this as "React Compiler broke
my code".
Of course, the best solution is to work with developers of these
libraries to address the root cause, and we're doing that. We've
previously discussed this situation with both of the respective
libraries:
* React Hook Form:
https://github.com/react-hook-form/react-hook-form/issues/11910#issuecomment-2135608761
* TanStack Table:
https://github.com/facebook/react/issues/33057#issuecomment-2840600158
and https://github.com/TanStack/table/issues/5567
In the meantime we need to make sure that React Compiler can work out of
the box as much as possible. This means teaching it about popular
libraries that cannot be memoized. We also can't silently skip
compilation, as this confuses users, so we need these error messages to
be visible to users. To that end, this PR adds:
* A flag to mark functions/hooks as incompatible
* Validation against use of such functions
* A default type provider to provide declarations for two
known-incompatible libraries
Note that Mobx is also incompatible, but the `observable()` function is
called outside of the component itself, so the compiler cannot currently
detect it. We may add validation for such APIs in the future.
Again, we really empathize with the developers of these libraries. We've
tried to word the error message non-judgementally, because we get that
it's hard! We're open to feedback about the error message, please let us
know.
## Summary
Update the CodeSandbox CI configuration to use Node 20 instead of Node
18, so that it matches the Node version specified in .nvmrc. This
ensures consistency between local development environments and CI
builds, reducing the risk of version-related build issues.
Closes#34328
## How did you test this change?
- Verified that .nvmrc specifies Node 20 and .codesandbox/ci.json is
updated accordingly.
- Locally switched to Node 20 using nvm use 20 and successfully ran
build scripts for all packages: `react`, `react-dom`,
`react-server-dom-webpack`, and `scheduler`.
- Confirmed there are no Node 20–specific build errors or warnings
locally.
- CI on the feature branch will now run with Node 20, and all builds are
expected to succeed.
## Summary
Part 1 of adding a "Config Override" panel to the React compiler
playground. The panel is placed to the left of the current input
section, and supports converting the comment pragmas in the input
section to a JavaScript-based config. Backwards sync has not been
implemented yet.
NOTE: I have added support for a new `OVERRIDE` type pragma to add
support for Map and Function types. (For now, the old pragma format is
still intact)
## Testing
Example of the config overrides synced to the source code:
<img width="1542" height="527" alt="Screenshot 2025-08-28 at 3 38 13 PM"
src="https://github.com/user-attachments/assets/d46e7660-61b9-4145-93b5-a4005d30064a"
/>
In #34125 I added a hint where if you assign to the .current property of
a frozen object, we suggest naming the variable as `ref` or `-Ref`.
However, the tracking for mutations that assign to .current specifically
wasn't propagated past function expression boundaries, which meant that
the hint only showed up if you mutated the ref in the main body of the
component/hook. That's less likely to happen since most folks know not
to access refs in render. What's more likely is that you'll (correctly)
assign a ref in an effect or callback, but the compiler will throw an
error. By showing a hint in this case we can help people understand the
naming pattern.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34298).
* #34276
* __->__ #34298
This adds `experimental_scrollIntoView(alignToTop)`. It doesn't yet
support `scrollIntoView(options)`.
Cases:
- No host children: Without host children, we represent the virtual
space of the Fragment by attempting to scroll to the nearest edge by
using its siblings. If the preferred sibling is not found, we'll try the
other side, and then the parent.
- 1 or more host children: In order to handle the case of children
spread between multiple scroll containers, we scroll to each child in
reverse order based on the `alignToTop` flag.
Due to the complexity of multiple scroll containers and dealing with
portals, I've added this under a separate feature flag with an
experimental prefix. We may stabilize it along with the other APIs, but
this allows us to not block the whole feature on it.
This PR was previously implementing a much more complex approach to
handling multiple scroll containers and portals. We're going to start
with the simple loop and see if we can find any concrete use cases where
that doesn't suffice. 01f31d43013ba7f6f54fd8a36990bbafc3c3cc68 is the
diff between approaches here.
I happened to notice that I forgot to cache playwright in
run_devtools_e2e_tests, so it would try to install it every time which
can randomly take a while to complete (I'm not sure why it's not
deterministic, but the dependencies appear to be installed
inconsistently across multiple workflows).
This PR adds the same cache we use for other steps that use playwright,
which should shave off some time from this workflow when the cache is
warm.
Additionally I omitted the standalone install-deps command as it appears
to be redundant and adds a lot of extra time to CI, due to the fact that
it installs many unrelated dependencies.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34320).
* #34321
* __->__ #34320
We currently assume that any functions passes as props may be event
handlers or effect functions, and thus don't check for side effects such
as mutating globals. However, if a prop is a function that returns JSX
that is a sure sign that it's actually a render helper and not an event
handler or effect function. So we now emit a `Render` effect for any
prop that is a JSX-returning function, triggering all of our render
validation.
This required a small fix to InferTypes: we weren't correctly populating
the `return` type of function types during unification. I also improved
the printing of types so we can see the inferred return types.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/33647).
* #33643
* #33650
* #33642
* __->__ #33647
When the Flight Client is waiting for pending debug chunks, it drops the
debug info if there is no writable side of the debug channel defined.
However, it should instead check if there's no readable side defined.
Fixing this is not only important for browser clients that don't want or
need a return channel, but it's also crucial for server-side rendering,
because the Node and Edge clients only accept a readable side of the
debug channel. So they can't even define a noop writable side as a
workaround.
When a debug channel is defined, we must ensure that we don't close the
Flight Client's response when the debug channel's readable is done, but
the RSC stream is still flowing. Now, we wait for both streams to end
before closing the response.
A Flow upgrade removed the bundled library definitinos for
SynthaticEvent and we probably want to use our internal definitions.
Those are not properly typed at this point yet, but we can look into
that as a followup.
This is the last version before "Natural Inference" change to Flow that
will require more changes, so doing a quick fast-forward PR here.
- Disabled a new Flow lint against unsafe `Object.assign`.
The docs site is in a separate repo, but this gives us a semi-automated
way to update the docs about our lint rules. The script generates
markdown files from the rule definitions which we can then manually
copy/paste into the docs site somewhere. In the future we can automate
this fully.
This update was a bit more involved.
- `React$Component` was removed, I replaced it with Flow component
types.
- Flow removed shipping the standard library. This adds the environment
libraries back from `flow-typed` which seemed to have changed slightly
(probably got more precise and less `any`s). Suppresses some new type
errors.
NOTE: this is a merged version of @mofeiZ's original PR along with my
edits per offline discussion. The description is updated to reflect the
latest approach.
The key problem we're trying to solve with this PR is to allow
developers more control over the compiler's various validations. The
idea is to have a number of rules targeting a specific category of
issues, such as enforcing immutability of props/state/etc or disallowing
access to refs during render. We don't want to have to run the compiler
again for every single rule, though, so @mofeiZ added an LRU cache that
caches the full compilation output of N most recent files. The first
rule to run on a given file will cause it to get cached, and then
subsequent rules can pull from the cache, with each rule filtering down
to its specific category of errors.
For the categories, I went through and assigned a category roughly 1:1
to existing validations, and then used my judgement on some places that
felt distinct enough to warrant a separate error. Every error in the
compiler now has to supply both a severity (for legacy reasons) and a
category (for ESLint). Each category corresponds 1:1 to a ESLint rule
definition, so that the set of rules is automatically populated based on
the defined categories.
Categories include a flag for whether they should be in the recommended
set or not.
Note that as with the original version of this PR, only
eslint-plugin-react-compiler is changed. We still have to update the
main lint rule.
## Test Plan
* Created a sample project using ESLint v9 and verified that the plugin
can be configured correctly and detects errors
* Edited `fixtures/eslint-v9` and introduced errors, verified that the w
latest config changes in that fixture it correctly detects the errors
* In the sample project, confirmed that the LRU caching is correctly
caching compiler output, ie compiling files just once.
Co-authored-by: Mofei Zhang <feifei0@meta.com>
After an easy couple version with #34252, this version is less flexible
(and safer) on inferring exported types mainly.
We require to annotate some exported types to differentiate between
`boolean` and literal `true` types, etc.
This fixes the displaying of "rendered by" section if owner stacks
contained any native frames. This regressed after
https://github.com/facebook/react/pull/34185, where we added the
Suspense boundary for the StackTraceView.
This fails because the Promise that is responsible for symbolication of
the source is never getting resolved or rejected.
Previously, we would just throw an Error without sending a corresponding
message to the `main` script, and it would just cache a Promise that is
never resolved, hence the Suspense boundary for "rendered by" section is
never resolved.
In a separate change, I think we need to update StackTraceView component
to display `native` as location, instead of `:0`:
<img width="712" height="118" alt="Screenshot 2025-08-20 at 00 20 42"
src="https://github.com/user-attachments/assets/c79735c9-fdd2-467c-96cd-2bc29d38c4e0"
/>
Because we sync built artifacts into Meta, we can't support edits from
inside www/fbsource to be synced back into OSS as it would cause merge
conflicts for future OSS PRs.
We have a workflow that should automatically catch and close these PRs,
but it looks like this one was missing one permission.
When a debug channel is used between the Flight server and a browser
Flight client, we want to allow the same RSC stream to be used for
server-side rendering. To support this, the Edge and Node Flight clients
also need to accept a `debugChannel` option. Without it, debug
information would be missing (e.g. for SSR error stacks), and in some
cases this could result in `Connection closed` errors.
This PR adds support for the `debugChannel` option in the Edge and Node
clients for ESM, Parcel, Turbopack, and Webpack. Unlike the browser
clients, these clients only support a one-way channel, since the Flight
server’s return protocol is not designed for multiple clients.
The implementation follows the approach used in the browser clients, but
excludes the writable parts.
Before the first rAF, we don't know if there has been other paints
before this and if so when. (We could get from performance observer.) We
can assume that it's not earlier than 0 so we used delay up until the
throttle time starting from zero but if the first paint is about to
happen that can be very soon after.
Instead, this reveals it during the next paint which should let us be
able to get into the first paint. If we can trust `rel="expect"` to have
done its thing we should schedule our raf before first paint but ofc
browsers can cheat and paint earlier if they want to.
If we're wrong, this is at least more batched than doing it
synchronously. However it will mean that things might get more flashy
than it should be if it would've been throttled. An alternative would be
to always throttle first reveal.
While we still use this package internally, we now ask users to install
eslint-plugin-react-hooks instead, so this package can now be deprecated
on npm.
This adds a "suspended by" row for each chunk that is referenced from a
client reference. So when you select a client component, you can see
what bundles will block that client component when loading on the
client.
This is only done in the browser build since if we added it on the
server, it would show up as a blocking resource and while it's possible
we expect that a typical server request won't block on loading JS.
<img width="664" height="486" alt="Screenshot 2025-08-17 at 3 45 14 PM"
src="https://github.com/user-attachments/assets/b1f83445-2a4e-4470-9a20-7cd215ab0482"
/>
<img width="745" height="678" alt="Screenshot 2025-08-17 at 3 46 58 PM"
src="https://github.com/user-attachments/assets/3558eae1-cf34-4e11-9d0e-02ec076356a4"
/>
Currently this is only included if it ends up wrapped in a lazy like in
the typical type position of a Client Component, but there's a general
issue that maybe hard references need to transfer their debug info to
the parent which can transfer it to the Fiber.
This is intended to be used by various client side resources where the
transfer size is interesting to know how it'll perform in various
network conditions. Not intended to be added by the server.
For now it's only added internally by DevTools itself on img/css but
I'll add it from Flight Client too in a follow up.
This now shows this as the "transfer size" which is the encoded body
size + headers/overhead. Where as the "fileSize" that I add to images is
the decoded body size, like what you'd see on disk. This is what Chrome
shows so it's less confusing if you compare Network tab and this view.
The theory here is that when we reveal a boundary coming from the server
we want to paint that before hydrating it. Hydration gets scheduled in a
macrotask with the scheduler but it's in theory possible that it runs
before the paint. If that's the case, then the JS that runs before
yielding during hydration might slightly delay the paint and we might
miss a window to skip the previous paint.
We currently only track the reason something might suspend in
development mode through debug info but this excludes some cases. As a
result we can end up with boundary that suspends but has no cause. This
tries to detect that and show a notice for why that might be. I'm also
trying to make it work with old React versions to cover everything.
In production we don't track any of this meta data like `_debugInfo`,
`_debugThenable` etc. so after resolution there's no information to take
from. Except suspensey images / css which we can track in prod too. We
could track lazy component types already. We'd have to add something
that tracks after the fact if something used a lazy child, child as a
promise, hooks, etc. which doesn't exist today. So that's not backwards
compatible and might add some perf/memory cost. However, another
strategy is also to try to replay the components after the fact which
could be backwards compatible. That's tricky for child position since
there's so many rules for how to do that which would have to be
replicated.
If you're in development you get a different error. Given that we've
added instrumentation very recently. If you're on an older development
version of React, then you get a different error. Unfortunately I think
my feature test is not quite perfect because it's tricky to test for the
instrumentation I just added.
https://github.com/facebook/react/pull/34146 So I think for some
prereleases that has `_debugOwner` but doesn't have that you'll get a
misleading error.
Finally, if you're in a modern development environment, the only reason
we should have any gaps is because of throw-a-Promise. This will
highlight it as missing. We can detect that something threw if a
Suspense boundary commits with a RetryCache but since it's a WeakSet we
can't look into it to see anything about what it might have been. I
don't plan on doing anything to improve this since it would only apply
to new versions of React anyway and it's just inherently flawed. So just
deprecate it #34032.
Note that nothing in here can detect that we suspended Transition. So
throwing at the root or in an update won't show that anywhere.
The new mutation/aliasing model significantly expands on the idea of
FunctionEffect. The type (and its usage in HIRFunction.effects) was only
necessary for the now-deleted old inference model so we can clean up
this code now.
Hints are meant as additional information to present to the developer
about an error. The first use-case here is for the suggestion to name
refs with "-Ref" if we encounter a mutation that looks like it might be
a ref. The original error printing used a second error detail which
printed the source code twice, a hint with just extra text is less
noisy.
If you have a ref that the compiler doesn't know is a ref (say, a value
returned from a custom hook) and try to assign its `.current = ...`, we
currently fail with a generic error that hook return values are not
mutable. However, an assignment to `.current` specifically is a very
strong hint that the value is likely to be a ref. So in this PR, we
track the reason for the mutation and if it ends up being an error, we
use it to show an additional hint to the user. See the fixture for an
example of the message.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/facebook/react/pull/34125).
* #34126
* __->__ #34125
* #34124
Stacked on https://github.com/facebook/react/pull/34069
Same basic semantics as the react-dom for determining document position
of a Fragment compared to a given node. It's simpler here because we
don't have to deal with inserted nodes or portals. So we can skip a
bunch of the validation logic.
The logic for handling empty fragments is the same so I've split out
`compareDocumentPositionForEmptyFragment` into a shared module. There
doesn't seem to be a great place to put shared DOM logic between Fabric
and DOM configs at the moment. There may be more of this coming as we
add more and more DOM APIs to RN.
For testing I've written Fantom tests internally which pass the basic
cases on this build. The renderer we have configured for Fabric tests in
the repo doesn't support the Element APIs we need like
`compareDocumentPosition`.
This computes a min and max range for the whole suspense boundary even
when selecting a single component so that each component in a boundary
has a consistent range.
The start of this range is the earliest start of I/O in that boundary or
the end of the previous suspense boundary, whatever is earlier. If the
end of the previous boundary would make the range large, then we cap it
since it's likely that the other boundary was just an independent
render.
The end of the range is the latest end of I/O in that boundary. If this
is smaller than the end of the previous boundary plus the 300ms
throttle, then we extend the end. This visualizes what throttling could
potentially do if the previous boundary committed right at its end. Ofc,
it might not have committed exactly at that time in this render. So this
is just showing a potential throttle that could happen. To see actual
throttle, you look in the Performance Track.
<img width="661" height="353" alt="Screenshot 2025-08-14 at 12 41 43 AM"
src="https://github.com/user-attachments/assets/b0155e5e-a83f-400c-a6b9-5c38a9d8a34f"
/>
We could come up with some annotation to highlight that this is eligible
to be throttled in this case. If the lines don't extend to the edge,
then it's likely it was throttled.
Found a couple of issues while integrating
FragmentInstance#compareDocumentPosition into Fabric.
1. Basic checks of nested host instances were inaccurate. For example,
checking the first child of the first child of the Fragment would not
return CONTAINED_BY.
2. Then fixing that logic exposed issues with Portals. The DOM
positioning relied on the assumption that the first and last top-level
children were in the same order as the Fiber tree. I added additional
checks against the parent's position in the DOM, and special cased a
portaled Fragment by getting its DOM parent from the child instance,
rather than taking the instance from the Fiber return. This should be
accurate in more cases. Though its still a guess and I'm not sure yet
I've covered every variation of this. Portals are hard to deal with and
we may end up having to push more results towards
IMPLEMENTATION_SPECIFIC if accuracy is an issue.
Same as #34166 but for Suspensey images.
The trick here is to check the `SuspenseyImagesMode` since not all
versions of React and not all subtrees will have Suspensey images
enabled yet.
The other trick is to read back from `currentSrc` to get the image url
we actually resolved to in this case. Similar to how for Suspensey CSS
we check if the media query would've matched.
<img width="591" height="205" alt="Screenshot 2025-08-11 at 9 32 56 PM"
src="https://github.com/user-attachments/assets/ac98785c-d3e0-407c-84e0-c27f86c0ecac"
/>
The skeletons right now are too jarring because they're visually heavier
than the content that comes in later. This makes them draw attention to
themselves as flashing things.
A good skeleton and loading indicator should ideally start as invisible
as possible and then gradually become more visible the longer time
passes so that if it loads quickly then it was never much visible at
all.
Even at its max it should never be heavier weight than the final content
so that it visually reverts into lesser. Another rule of thumb is that
it should be as close as possible to the final content in size but if
it's unknown it should always be smaller than the final content so that
the content grows into its slot rather than the slot contracting.
This makes the skeleton fade from invisible into the dimmest color just
as a subtle hint that something is still loading.
I also added a missing skeleton since the stack traces in rendered by
can now suspend while source mapping.
The other tweak I did is use disabled buttons in all the cases where we
load the ability to enable a button. This is more subtle and if you
hover over you can see why it's still disabled. Rather than flashing the
button each time you change element.
This fixes an edge case where you abort the render while rendering a
component that ends up Suspending. It technically only applied if you
were deep enough to be inside `renderNode` and was not susceptible to
hanging if the abort + suspending component was being tried inside
retryRenderTask/retryReplaytask.
The fix is to preempt the thenable checks in renderNode and check if the
request is aborting and if so just bubble up to the task handler.
The reason this hung before is a new task would get scheduled after we
had aborted every other task (minus the currently rendering one). This
led to a situation where the task count would not hit zero.
We need to track that Suspensey CSS (Host Resources) can contribute to
the loading state. We can pick up the start/end time from the
Performance Observer API since we know which resource was loaded.
If DOM nodes are not filtered there's a link to the `<link>` instance.
The `"awaited by"` stack is the callsite of the JSX creating the
`<link>`.
<img width="591" height="447" alt="Screenshot 2025-08-11 at 1 35 21 AM"
src="https://github.com/user-attachments/assets/63af0ca9-de8d-4c74-a797-af0a009b5d73"
/>
Inspecting the link itself:
<img width="592" height="344" alt="Screenshot 2025-08-11 at 1 31 43 AM"
src="https://github.com/user-attachments/assets/89603dbc-6721-4bbf-8b58-6010719b29e3"
/>
In this approach I only include it if the page currently matches the
media query. It might contribute in some other scenario but we're not
showing every possible state but every possible scenario that might
suspend if timing changes in the current state.
Stacked on #34148.
This picks up the stack for the await from the `use()` Hook if one was
used to get this async info.
When you select a component that used hooks, we already collect this
information.
If you select a Suspense boundary, this lazily invokes the first
component that awaited this data to inspects its hooks and produce a
stack trace for the use().
When all we have for the name is "Promise" I also use the name of the
first callsite in the stack trace if there's more than one. Which in
practice will be the name of the custom Hook that called it. Ideally
we'd use source mapping and ignore listing for this but that would
require suspending the display. We could maybe make the SuspendedByRow
wrapped in a Suspense boundary for this case.
<img width="438" height="401" alt="Screenshot 2025-08-10 at 10 07 55 PM"
src="https://github.com/user-attachments/assets/2a68917d-c27b-4c00-84aa-0ceb51c4e541"
/>
Similar to #34144 but for `use()`.
`use()` dependencies don't get added to the `fiber._debugInfo` set
because that just models the things blocking the children, and not the
Fiber component itself. This picks up any debug info from the thenable
state that we stashed onto `_debugThenableState` so that we know it used
`use()`.
<img width="593" height="425" alt="Screenshot 2025-08-09 at 4 03 40 PM"
src="https://github.com/user-attachments/assets/c7e06884-4efd-47fa-a76b-132935db6ddc"
/>
Without #34146 this doesn't pick up uninstrumented promises but after
it, it'll pick those up as well. An instrumented promise that doesn't
have anything in its debug info is not picked up. For example, if it
didn't depend on any I/O on the server.
This doesn't yet pick up the stack trace of the `use()` call. That
information is in the Hooks information but needs a follow up to extract
it.
E.g. if the owner is null or the same as current component and no stack.
This happens for example when you return a plain Promise in the child
position and inspect the component it was returned in since there's no
hook stack and the owner is the same as the instance itself so there's
nothing new to link to.
Before:
<img width="267" height="99" alt="Screenshot 2025-08-10 at 10 28 32 PM"
src="https://github.com/user-attachments/assets/23341ab2-2888-457d-a1d1-128f3e0bd5ec"
/>
After:
<img width="253" height="91" alt="Screenshot 2025-08-10 at 10 29 04 PM"
src="https://github.com/user-attachments/assets/b33bb38b-891a-4f46-bc16-15604b033cdb"
/>
In the case where a Promise is not cached, then the thenable state might
contain an older version. This version is the one that was actually
observed by the committed render, so that's the version we'll want to
inspect.
We used to not store the thenable state but now we have it on
`_debugThenableState` in DEV.
<img width="593" height="359" alt="Screenshot 2025-08-10 at 8 26 04 PM"
src="https://github.com/user-attachments/assets/51ee53f3-a31a-4e3f-a4cf-bb20b6efe0cb"
/>
Similar to #34137 but for Promises.
This lets us pick up the debug info from a raw Promise as a child which
is not covered by `_debugThenables`. Currently ChildFiber doesn't stash
its thenables so we can't pick them up from devtools after the fact
without some debug info added to the parent.
It also lets us track some approximate start/end time of use():ed
promises based on the first time we saw this particular Promise.
Normally, we pick up debug info from instrumented Promise or React.Lazy
while we're reconciling in ReactChildFiber when they appear in the child
position. We add those to the `_debugInfo` of the Fiber.
However, we don't do that for for Lazy in the Component type position.
Instead, we have to pick up the debug info from it explicitly in
DevTools. Likely this is the info added by #34137. Older versions
wouldn't be covered by this particular mechanism but more generally from
throwing a Promise.
<img width="592" height="449" alt="Screenshot 2025-08-08 at 11 32 33 PM"
src="https://github.com/user-attachments/assets/87211c64-a7df-47b7-a784-5cdc7c5fae16"
/>
This creates a debug info object for the React.lazy call when it's
called on the client. We have some additional information we can track
for these since they're created by React earlier.
We can track the stack trace where `React.lazy` was called to associate
it back to something useful. We can track the start time when we
initialized it for the first time and the end time when it resolves. The
name from the promise if available.
This data is currently only picked up in child position and not
component position. The component position is in a follow up.
<img width="592" height="451" alt="Screenshot 2025-08-08 at 2 49 33 PM"
src="https://github.com/user-attachments/assets/913d2629-6df5-40f6-b036-ae13631379b9"
/>
This begs for ignore listing in the front end since these stacks aren't
filtered on the server.
The name prop will be used in the Suspense tab to help identity a
boundary. Activity will also allow names. A custom component can be
identified by the name of the component but built-ins doesn't have that.
This PR adds it to the Components Tree View as well since otherwise you
only have the key to go on. Normally we don't add all the props to avoid
making this view too noisy but this is an exception along with key to
help identify a boundary quickly in the tree.
Unlike the SuspenseNode store, this wouldn't ever have a name inferred
by owner since that kind of context already exists in this view.
<img width="600" height="161" alt="Screenshot 2025-08-08 at 1 20 36 PM"
src="https://github.com/user-attachments/assets/fe50d624-887a-4b9d-9186-75f131f83195"
/>
I also made both the key and name prop searchable.
<img width="608" height="206" alt="Screenshot 2025-08-08 at 1 32 27 PM"
src="https://github.com/user-attachments/assets/d3502d9c-7614-45fc-b973-57f06dd9cddc"
/>
This shows the stack trace of the JSX at each level so now you can also
jump to the code location for the JSX callsite. The visual is similar to
the owner stacks with `createTask` except when you click the `<...>` you
jump to the Instance in the Components panel.
<img width="593" height="450" alt="Screenshot 2025-08-08 at 12 19 21 AM"
src="https://github.com/user-attachments/assets/dac35faf-9d99-46ce-8b41-7c6fe24625d2"
/>
I'm not sure it's really necessary to have all the JSX stacks of every
owner. We could just have it for the current component and then the rest
of the owners you could get to if you just click that owner instance.
As a bonus, I also use the JSX callsite as the fallback for the "View
Source" button. This is primarily useful for built-ins like `<div>` and
`<Suspense>` that don't have any implementation to jump to anyway. It's
useful to be able to jump to where a boundary was defined.
With RSC it's common to get React.lazy objects in the children position.
This first formats them nicely.
Then it adds introspection support for both lazy and elements.
Unfortunately because of quirks with the hydration mechanism we have to
expose it under the name `_payload` instead of something direct. Also
because the name "type" is taken we can't expose the type field on an
element neither. That whole algorithm could use a rewrite.
<img width="422" height="137" alt="Screenshot 2025-08-07 at 11 37 03 PM"
src="https://github.com/user-attachments/assets/a6f65f58-dbc4-4b8f-928b-d7f629fc51b2"
/>
<img width="516" height="275" alt="Screenshot 2025-08-07 at 11 36 36 PM"
src="https://github.com/user-attachments/assets/650bafdb-a633-4d78-9487-a750a18074ce"
/>
For JSX an alternative or additional feature might be instead to jump to
the first Instance that was rendered using that JSX. We know that based
on the equality of the memoizedProps on the Fiber. It's just a matter of
whether we do that eagerly or more lazily when you click but you may not
have a match so would be nice to indicate that before you click.
Follow up to #34093.
There's an issue where the skipFrames argument isn't part of the cache
key so the other parsers that expect skipping one frame might skip zero
and show the internal `fakeJSXDEV` callsite. Ideally we should include
the skipFrames as part of the cache key but we can also always just skip
one.
- run:yarn workspace eslint-plugin-react-hooks test
# ----- BUILD -----
build_and_lint:
name:yarn build and lint
@@ -567,7 +567,7 @@ jobs:
- name:Search build artifacts for unminified errors
run:|
yarn extract-errors
git diff --quiet || (echo "Found unminified errors. Either update the error codes map or disable error minification for the affected build, if appropriate." && false)
git diff --exit-code || (echo "Found unminified errors. Either update the error codes map or disable error minification for the affected build, if appropriate." && false)
Below is a list of all new features, APIs, and bug fixes.
Read the [React 19.2 release post](https://react.dev/blog/2025/10/01/react-19-2) for more information.
### New React Features
- [`<Activity>`](https://react.dev/reference/react/Activity): A new API to hide and restore the UI and internal state of its children.
- [`useEffectEvent`](https://react.dev/reference/react/useEffectEvent) is a React Hook that lets you extract non-reactive logic into an [Effect Event](https://react.dev/learn/separating-events-from-effects#declaring-an-effect-event).
- [`cacheSignal`](https://react.dev/reference/react/cacheSignal) (for RSCs) lets your know when the `cache()` lifetime is over.
- [React Performance tracks](https://react.dev/reference/dev-tools/react-performance-tracks) appear on the Performance panel’s timeline in your browser developer tools
### New React DOM Features
- Added resume APIs for partial pre-rendering with Web Streams:
- [`resume`](https://react.dev/reference/react-dom/server/resume): to resume a prerender to a stream.
- [`resumeAndPrerender`](https://react.dev/reference/react-dom/static/resumeAndPrerender): to resume a prerender to HTML.
- Added resume APIs for partial pre-rendering with Node Streams:
- [`resumeToPipeableStream`](https://react.dev/reference/react-dom/server/resumeToPipeableStream): to resume a prerender to a stream.
- [`resumeAndPrerenderToNodeStream`](https://react.dev/reference/react-dom/static/resumeAndPrerenderToNodeStream): to resume a prerender to HTML.
- Updated [`prerender`](https://react.dev/reference/react-dom/static/prerender) APIs to return a `postponed` state that can be passed to the `resume` APIs.
### Notable changes
- React DOM now batches suspense boundary reveals, matching the behavior of client side rendering. This change is especially noticeable when animating the reveal of Suspense boundaries e.g. with the upcoming `<ViewTransition>` Component. React will batch as much reveals as possible before the first paint while trying to hit popular first-contentful paint metrics.
- Add Node Web Streams (`prerender`, `renderToReadableStream`) to server-side-rendering APIs for Node.js
- Use underscore instead of `:` IDs generated by useId
### All Changes
#### React
-`<Activity />` was developed over many years, starting before `ClassComponent.setState` (@acdlite@sebmarkbage and many others)
- Stringify context as "SomeContext" instead of "SomeContext.Provider" (@kassens [#33507](https://github.com/facebook/react/pull/33507))
- Include stack of cause of React instrumentation errors with `%o` placeholder (@eps1lon [#34198](https://github.com/facebook/react/pull/34198))
- Fix infinite `useDeferredValue` loop in popstate event (@acdlite [#32821](https://github.com/facebook/react/pull/32821))
- Fix a bug when an initial value was passed to `useDeferredValue` (@acdlite [#34376](https://github.com/facebook/react/pull/34376))
- Fix a crash when submitting forms with Client Actions (@sebmarkbage [#33055](https://github.com/facebook/react/pull/33055))
- Hide/unhide the content of dehydrated suspense boundaries if they resuspend (@sebmarkbage [#32900](https://github.com/facebook/react/pull/32900))
- Avoid stack overflow on wide trees during Hot Reload (@sophiebits [#34145](https://github.com/facebook/react/pull/34145))
- Improve Owner and Component stacks in various places (@sebmarkbage, @eps1lon: [#33629](https://github.com/facebook/react/pull/33629), [#33724](https://github.com/facebook/react/pull/33724), [#32735](https://github.com/facebook/react/pull/32735), [#33723](https://github.com/facebook/react/pull/33723))
- Block on Suspensey Fonts during reveal of server-side-rendered content (@sebmarkbage [#33342](https://github.com/facebook/react/pull/33342))
- Use underscore instead of `:` for IDs generated by `useId` (@sebmarkbage, @eps1lon: [#32001](https://github.com/facebook/react/pull/32001), [https://github.com/facebook/react/pull/33342](https://github.com/facebook/react/pull/33342)[#33099](https://github.com/facebook/react/pull/33099), [#33422](https://github.com/facebook/react/pull/33422))
- Stop warning when ARIA 1.3 attributes are used (@Abdul-Omira [#34264](https://github.com/facebook/react/pull/34264))
- Allow `nonce` to be used on hoistable styles (@Andarist [#32461](https://github.com/facebook/react/pull/32461))
- Warn for using a React owned node as a Container if it also has text content (@sebmarkbage [#32774](https://github.com/facebook/react/pull/32774))
- s/HTML/text for for error messages if text hydration mismatches (@rickhanlonii [#32763](https://github.com/facebook/react/pull/32763))
- Fix a bug with `React.use` inside `React.lazy`\-ed Component (@hi-ogawa [#33941](https://github.com/facebook/react/pull/33941))
- Enable the `progressiveChunkSize` option for server-side-rendering APIs (@sebmarkbage [#33027](https://github.com/facebook/react/pull/33027))
- Fix a bug with deeply nested Suspense inside Suspense fallback when server-side-rendering (@gnoff [#33467](https://github.com/facebook/react/pull/33467))
- Avoid hanging when suspending after aborting while rendering (@gnoff [#34192](https://github.com/facebook/react/pull/34192))
- Add Node Web Streams to server-side-rendering APIs for Node.js (@sebmarkbage [#33475](https://github.com/facebook/react/pull/33475))
#### React Server Components
- Preload `<img>` and `<link>` using hints before they're rendered (@sebmarkbage [#34604](https://github.com/facebook/react/pull/34604))
- Log error if production elements are rendered during development (@eps1lon [#34189](https://github.com/facebook/react/pull/34189))
- Fix a bug when returning a Temporary reference (e.g. a Client Reference) from Server Functions (@sebmarkbage [#34084](https://github.com/facebook/react/pull/34084), @denk0403 [#33761](https://github.com/facebook/react/pull/33761))
- Pass line/column to `filterStackFrame` (@eps1lon [#33707](https://github.com/facebook/react/pull/33707))
- Support Async Modules in Turbopack Server References (@lubieowoce [#34531](https://github.com/facebook/react/pull/34531))
- Add support for .mjs file extension in Webpack (@jennyscript [#33028](https://github.com/facebook/react/pull/33028))
- Fix a wrong missing key warning (@unstubbable [#34350](https://github.com/facebook/react/pull/34350))
- Make console log resolve in predictable order (@sebmarkbage [#33665](https://github.com/facebook/react/pull/33665))
#### React Reconciler
- [createContainer](https://github.com/facebook/react/blob/v19.2.0/packages/react-reconciler/src/ReactFiberReconciler.js#L255-L261) and [createHydrationContainer](https://github.com/facebook/react/blob/v19.2.0/packages/react-reconciler/src/ReactFiberReconciler.js#L305-L312) had their parameter order adjusted after `on*` handlers to account for upcoming experimental APIs
reason:`Components and hooks cannot be created dynamically`,
description:`The function \`${nestedName}\` appears to be a React ${nestedFnType.toLowerCase()}, but it's defined inside \`${parentName}\`. Components and Hooks should always be declared at module scope`,
details:[
{
kind:'error',
message:'this function dynamically created a component/hook',
reason:`Expected at least suppression comment source range`,
loc: GeneratedSource,
description: null,
details:[
{
kind:'error',
loc: GeneratedSource,
message: null,
},
],
});
consterror=newCompilerError();
for(constsuppressionRangeofsuppressionRanges){
@@ -183,9 +201,9 @@ export function suppressionsToCompilerError(
}
error.pushDiagnostic(
CompilerDiagnostic.create({
category: reason,
reason: reason,
description:`React Compiler only works when your components follow all the rules of React, disabling them may result in unexpected or incorrect behavior. Found suppression \`${suppressionRange.disableComment.value.trim()}\``,
severity: ErrorSeverity.InvalidReact,
category: ErrorCategory.Suppression,
suggestions:[
{
description: suggestion,
@@ -196,7 +214,7 @@ export function suppressionsToCompilerError(
@@ -1544,7 +1587,7 @@ function lowerObjectPropertyKey(
builder.errors.push({
reason:`(BuildHIR::lowerExpression) Expected Identifier, got ${key.type} key in ObjectExpression`,
severity: ErrorSeverity.Todo,
category: ErrorCategory.Todo,
loc: key.node.loc??null,
suggestions: null,
});
@@ -1601,7 +1644,7 @@ function lowerExpression(
if(!valuePath.isExpression()){
builder.errors.push({
reason:`(BuildHIR::lowerExpression) Handle ${valuePath.type} values in ObjectExpression`,
severity: ErrorSeverity.Todo,
category: ErrorCategory.Todo,
loc: valuePath.node.loc??null,
suggestions: null,
});
@@ -1627,7 +1670,7 @@ function lowerExpression(
if(propertyPath.node.kind!=='method'){
builder.errors.push({
reason:`(BuildHIR::lowerExpression) Handle ${propertyPath.node.kind} functions in ObjectExpression`,
severity: ErrorSeverity.Todo,
category: ErrorCategory.Todo,
loc: propertyPath.node.loc??null,
suggestions: null,
});
@@ -1648,7 +1691,7 @@ function lowerExpression(
}else{
builder.errors.push({
reason:`(BuildHIR::lowerExpression) Handle ${propertyPath.type} properties in ObjectExpression`,
severity: ErrorSeverity.Todo,
category: ErrorCategory.Todo,
loc: propertyPath.node.loc??null,
suggestions: null,
});
@@ -1681,7 +1724,7 @@ function lowerExpression(
}else{
builder.errors.push({
reason:`(BuildHIR::lowerExpression) Handle ${element.type} elements in ArrayExpression`,
severity: ErrorSeverity.Todo,
category: ErrorCategory.Todo,
loc: element.node.loc??null,
suggestions: null,
});
@@ -1701,7 +1744,7 @@ function lowerExpression(
builder.errors.push({
reason:`Expected an expression as the \`new\` expression receiver (v8 intrinsics are not supported)`,
description:`Got a \`${calleePath.node.type}\``,
severity: ErrorSeverity.InvalidJS,
category: ErrorCategory.Syntax,
loc: calleePath.node.loc??null,
suggestions: null,
});
@@ -1727,7 +1770,7 @@ function lowerExpression(
if(!calleePath.isExpression()){
builder.errors.push({
reason:`Expected Expression, got ${calleePath.type} in CallExpression (v8 intrinsics not supported). This error is likely caused by a bug in React Compiler. Please file an issue`,
severity: ErrorSeverity.Todo,
category: ErrorCategory.Todo,
loc: calleePath.node.loc??null,
suggestions: null,
});
@@ -1761,7 +1804,7 @@ function lowerExpression(
if(!leftPath.isExpression()){
builder.errors.push({
reason:`(BuildHIR::lowerExpression) Expected Expression, got ${leftPath.type} lval in BinaryExpression`,
severity: ErrorSeverity.Todo,
category: ErrorCategory.Todo,
loc: leftPath.node.loc??null,
suggestions: null,
});
@@ -1773,7 +1816,7 @@ function lowerExpression(
if(operator==='|>'){
builder.errors.push({
reason:`(BuildHIR::lowerExpression) Pipe operator not supported`,
severity: ErrorSeverity.Todo,
category: ErrorCategory.Todo,
loc: leftPath.node.loc??null,
suggestions: null,
});
@@ -1802,7 +1845,7 @@ function lowerExpression(
if(last===null){
builder.errors.push({
reason:`Expected sequence expression to have at least one expression`,
severity: ErrorSeverity.InvalidJS,
category: ErrorCategory.Syntax,
loc: expr.node.loc??null,
suggestions: null,
});
@@ -2014,7 +2057,7 @@ function lowerExpression(
builder.errors.push({
reason:`(BuildHIR::lowerExpression) Unsupported syntax on the left side of an AssignmentExpression`,
description:`Expected an LVal, got: ${left.type}`,
severity: ErrorSeverity.Todo,
category: ErrorCategory.Todo,
loc: left.node.loc??null,
suggestions: null,
});
@@ -2042,7 +2085,7 @@ function lowerExpression(
if(binaryOperator==null){
builder.errors.push({
reason:`(BuildHIR::lowerExpression) Handle ${operator} operators in AssignmentExpression`,
severity: ErrorSeverity.Todo,
category: ErrorCategory.Todo,
loc: expr.node.loc??null,
suggestions: null,
});
@@ -2141,7 +2184,7 @@ function lowerExpression(
default:{
builder.errors.push({
reason:`(BuildHIR::lowerExpression) Expected Identifier or MemberExpression, got ${expr.type} lval in AssignmentExpression`,
severity: ErrorSeverity.Todo,
category: ErrorCategory.Todo,
loc: expr.node.loc??null,
suggestions: null,
});
@@ -2180,7 +2223,7 @@ function lowerExpression(
if(!attribute.isJSXAttribute()){
builder.errors.push({
reason:`(BuildHIR::lowerExpression) Handle ${attribute.type} attributes in JSXElement`,
severity: ErrorSeverity.Todo,
category: ErrorCategory.Todo,
loc: attribute.node.loc??null,
suggestions: null,
});
@@ -2193,7 +2236,7 @@ function lowerExpression(
if(propName.indexOf(':')!==-1){
builder.errors.push({
reason:`(BuildHIR::lowerExpression) Unexpected colon in attribute name \`${propName}\``,
@@ -119,7 +119,13 @@ function parseAliasingSignatureConfig(
CompilerError.invariant(!lifetimes.has(temp),{
reason:`Invalid type configuration for module`,
description:`Expected aliasing signature to have unique names for receiver, params, rest, returns, and temporaries in module '${moduleName}'`,
loc,
details:[
{
kind:'error',
loc,
message: null,
},
],
});
constplace=signatureArgument(lifetimes.size);
lifetimes.set(temp,place);
@@ -130,7 +136,13 @@ function parseAliasingSignatureConfig(
CompilerError.invariant(place!=null,{
reason:`Invalid type configuration for module`,
description:`Expected aliasing signature effects to reference known names from receiver/params/rest/returns/temporaries, but '${temp}' is not a known name in '${moduleName}'`,
loc,
details:[
{
kind:'error',
loc,
message: null,
},
],
});
returnplace;
}
@@ -265,7 +277,13 @@ function addShape(
CompilerError.invariant(!registry.has(id),{
reason:`[ObjectShape] Could not add shape to registry: name ${id} already exists.`,
description: null,
loc: null,
details:[
{
kind:'error',
loc: null,
message: null,
},
],
suggestions: null,
});
registry.set(id,shape);
@@ -332,6 +350,7 @@ export type FunctionSignature = {
'Unexpected reassignment of a variable which was defined outside of the component. Components and hooks should be pure and side-effect free, but variable reassignment is a form of side-effect. If this variable is used in rendering, use useState instead. (https://react.dev/reference/rules/components-and-hooks-must-be-pure#side-effects-must-run-outside-of-render)',
return'Modifying a value used previously in an effect function or as an effect dependency is not allowed. Consider moving the modification before calling useEffect()';
* MaybeAlias indicates potential data flow from unknown function calls,
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
