* Move memoizedProps to after beginWork remove memoizeProps helper
We always call this at the end. This is now enforced to line up since
we do the equality check in the beginning of beginWork. So we can't
have special cases.
* Inline the one caller of memoizeState
Outside of concurrent mode, schedules a force update on a suspended
class component to force it to prevent it from bailing out and
reusing the current fiber, which we know to be inconsistent.
Removes support for using arbitrary promises as the type of a React
element. Instead, promises must be wrapped in React.lazy. This gives us
flexibility later if we need to change the protocol.
The reason is that promises do not provide a way to call their
constructor multiple times. For example:
const promiseForA = new Promise(resolve => {
fetchA(a => resolve(a));
});
Given a reference to `promiseForA`, there's no way to call `fetchA`
again. Calling `then` on the promise doesn't run the constructor again;
it only attaches another listener.
In the future we will likely introduce an API like `React.eager` that
is similar to `lazy` but eagerly calls the constructor. That gives us
the ability to call the constructor multiple times. E.g. to increase
the priority, or to retry if the first operation failed.
* Suspense component does not capture if `fallback` is not defined
A missing fallback prop means the exception should propagate to the next
parent (like a rethrow). That way a Suspense component can specify other
props like maxDuration without needing to provide a fallback, too.
Closes#13864
* Change order of checks
This was the original, lower-level API before we landed on `fallback`
instead. (We might add a different lower-level API in the future, likely
alongside a new API for catching errors).
In the default mode, Suspense has special semantics where, in
addition to timing out immediately, we don't unwind the stack before
rendering the fallback. Instead, we commit the tree in an inconsistent
state, then synchronous render *again* to switch to the fallback. This
is slower but is less likely to cause issues with older components that
perform side effects in the render phase (e.g. componentWillMount,
componentWillUpdate, and componentWillReceiveProps).
We should do this in strict mode, too, so that there are no semantic
differences (in prod, at least) between default mode and strict mode.
The rationale is that it makes it easier to wrap a tree in strict mode
and start migrating components incrementally without worrying about new
bugs in production.
* Store the start time on `updateQueue` instead of `stateNode`
Originally I did this to free the `stateNode` field to store a second
set of children. I don't we'll need this anymore, since we use fragment
fibers instead. But I still think using `updateQueue` makes more sense
so I'll leave this in.
* Use fragment fibers to keep the primary and fallback children separate
If the children timeout, we switch to showing the fallback children in
place of the "primary" children. However, we don't want to delete the
primary children because then their state will be lost (both the React
state and the host state, e.g. uncontrolled form inputs). Instead we
keep them mounted and hide them. Both the fallback children AND the
primary children are rendered at the same time. Once the primary
children are un-suspended, we can delete the fallback children — don't
need to preserve their state.
The two sets of children are siblings in the host environment, but
semantically, for purposes of reconciliation, they are two separate
sets. So we store them using two fragment fibers.
However, we want to avoid allocating extra fibers for every placeholder.
They're only necessary when the children time out, because that's the
only time when both sets are mounted.
So, the extra fragment fibers are only used if the children time out.
Otherwise, we render the primary children directly. This requires some
custom reconciliation logic to preserve the state of the primary
children. It's essentially a very basic form of re-parenting.
* Use `memoizedState` to store various pieces of SuspenseComponent's state
SuspenseComponent has three pieces of state:
- alreadyCaptured: Whether a component in the child subtree already
suspended. If true, subsequent suspends should bubble up to the
next boundary.
- didTimeout: Whether the boundary renders the primary or fallback
children. This is separate from `alreadyCaptured` because outside of
strict mode, when a boundary times out, the first commit renders the
primary children in an incomplete state, then performs a second commit
to switch the fallback. In that first commit, `alreadyCaptured` is
false and `didTimeout` is true.
- timedOutAt: The time at which the boundary timed out. This is separate
from `didTimeout` because it's not set unless the boundary
actually commits.
These were previously spread across several fields.
This happens to make the non-strict case a bit less hacky; the logic for
that special case is now mostly localized to the UnwindWork module.
* Hide timed-out Suspense children
When a subtree takes too long to load, we swap its contents out for
a fallback to unblock the rest of the tree. Because we don't want
to lose the state of the timed out view, we shouldn't actually delete
the nodes from the tree. Instead, we'll keep them mounted and hide
them visually. When the subtree is unblocked, we un-hide it, having
preserved the existing state.
Adds additional host config methods. For mutation mode:
- hideInstance
- hideTextInstance
- unhideInstance
- unhideTextInstance
For persistent mode:
- cloneHiddenInstance
- cloneUnhiddenInstance
- createHiddenTextInstance
I've only implemented the new methods in the noop and test renderers.
I'll implement them in the other renderers in subsequent commits.
* Include `hidden` prop in noop renderer's output
This will be used in subsequent commits to test that timed-out children
are properly hidden.
Also adds getChildrenAsJSX() method as an alternative to using
getChildren(). (Ideally all our tests would use test renderer #oneday.)
* Implement hide/unhide host config methods for DOM renderer
For DOM nodes, we hide using `el.style.display = 'none'`.
Text nodes don't have style, so we hide using `text.textContent = ''`.
* Implement hide/unhide host config methods for Art renderer
* Create DOM fixture that tests state preservation of timed out content
* Account for class components that suspend outside concurrent mode
Need to distinguish mount from update. An unfortunate edge case :(
* Fork appendAllChildren between persistent and mutation mode
* Remove redundant check for existence of el.style
* Schedule placement effect on indeterminate components
In non-concurrent mode, indeterminate fibers may commit in an
inconsistent state. But when they update, we should throw out the
old fiber and start fresh. Which means the new fiber needs a
placement effect.
* Pass null instead of current everywhere in mountIndeterminateComponent
* Deprecate findDOMNode in StrictMode
There are two scenarios. One is that we pass a component instance that is
already in strict mode or the node that we find is in strict mode if
an outer component renders into strict mode.
I use a separate method findHostInstanceWithWarning for this so that
a) I can pass the method name (findDOMNode/findNodeHandle).
b) Can ignore this warning in React Native mixins/NativeComponent that use this helper.
I don't want to expose the fiber to the renderers themselves.
- "Interactive" -> "user-blocking"
- "Whenever" -> "Idle"
These are the terms used by @spanicker in their main-thread scheduling
proposal: https://github.com/spanicker/main-thread-scheduling#api-sketch
That proposal also uses "microtask" instead of "immediate" and "default"
instead of "normal." Not sure about "microtask" because I don't think
most people know what that is. And our implementation isn't a proper
microtask, though you could use it to implement microtasks if you made
sure to wrap every entry point. I don't really have a preference between
"default" and "normal."
These aren't necessarily the final names. Still prefixed by `unstable_`.
We're not planning to encourage legacy context, and without this change, it's difficult to use pure+forwardRef together. We could special-case `pure(forwardRef(...))` but this is hopefully simpler.
```js
React.pure(function(props, ref) {
// ...
});
```
Fixes#13777
As part of #11927 we introduced a regression by adding onclick handler
to the React root. This causes the whole React tree to flash when tapped
on iOS devices (for reasons I outlined in
https://github.com/facebook/react/issues/12989#issuecomment-414266839).
To fix this, we should only apply onclick listeners to portal roots. I
verified that my proposed fix indeed works by checking out our DOM
fixtures and adding regression tests.
Strangely, I had to make changes to the DOM fixtures to see the behavior
in the first place. This seems to be caused by our normal sites (and
thus their React root) being bigger than the viewport:
An alternative approach to finding out if we're appending to a React
root would be to add a third parameter to `appendChildToContainer` based
on the tag of the parent fiber.
* [scheduler] Eagerly schedule rAF at beginning of frame
Eagerly schedule the next animation callback at the beginning of the
frame. If the scheduler queue is not empty at the end of the frame, it
will continue flushing inside that callback. If the queue *is* empty,
then it will exit immediately. Posting the callback at the start of the
frame ensures it's fired within the earliest possible frame. If we
waited until the end of the frame to post the callback, we risk the
browser skipping a frame and not firing the callback until the frame
after that.
* Re-name scheduledCallback -> scheduledHostCallback
Previously, we were emptying root.pendingInteractionMap and permanently losing those interactions when applying an unrelated update to a tree that has no scheduled work that is waiting on promise resolution. (That is, one that is showing a fallback and waiting for the suspended content to resolve.)
The logic I'm leaving untouched with `nextRenderIncludesTimedOutPlaceholder` is *not* correct -- what we want is instead to know if *any* placeholder anywhere in the tree is showing its fallback -- but we don't currently have a better replacement, and this should unblock tracing with suspense again.
This package uses `process.env.NODE_ENV` but does not transform its usage during bundling like the rest of the React libraries do. This causes issues when `process` is not defined globally.
* Jest + test renderer helpers for concurrent mode
Most of our concurrent React tests use the noop renderer. But most
of those tests don't test the renderer API, and could instead be
written with the test renderer. We should switch to using the test
renderer whenever possible, because that's what we expect product devs
and library authors to do. If test renderer is sufficient for writing
most React core tests, it should be sufficient for others, too. (The
converse isn't true but we should aim to dogfood test renderer as much
as possible.)
This PR adds a new package, jest-react (thanks @cpojer). I've moved
our existing Jest matchers into that package and added some new ones.
I'm not expecting to figure out the final API in this PR. My goal is
to land something good enough that we can start dogfooding in www.
TODO: Continue migrating Suspense tests, decide on better API names
* Add additional invariants to prevent common errors
- Errors if user attempts to flush when log of yields is not empty
- Throws if argument passed to toClearYields is not ReactTestRenderer
* Better method names
- toFlushAll -> toFlushAndYield
- toFlushAndYieldThrough ->
- toClearYields -> toHaveYielded
Also added toFlushWithoutYielding
* Fix jest-react exports
* Tweak README
`--save` is on by default as of [npm 5](https://blog.npmjs.org/post/161081169345/v500), and `npm install aphrodite` is functionally equivalent to `npm install --save aphrodite` now
* Removed the enableGetDerivedStateFromCatch feature flag (aka permanently enabled the feature)
* Forked/copied ReactErrorBoundaries to ReactLegacyErrorBoundaries for testing componentDidCatch
* Updated error boundaries tests to apply to getDerivedStateFromCatch
* Renamed getDerivedStateFromCatch -> getDerivedStateFromError
* Warn if boundary with only componentDidCatch swallows error
* Fixed a subtle reconciliation bug with render phase error boundary
* pure
A higher-order component version of the `React.PureComponent` class.
During an update, the previous props are compared to the new props. If
they are the same, React will skip rendering the component and
its children.
Unlike userspace implementations, `pure` will not add an additional
fiber to the tree.
The first argument must be a functional component; it does not work
with classes.
`pure` uses shallow comparison by default, like `React.PureComponent`.
A custom comparison can be passed as the second argument.
Co-authored-by: Andrew Clark <acdlite@fb.com>
Co-authored-by: Sophie Alpert <sophiebits@fb.com>
* Warn if first argument is not a functional component
Added some tests for the non-DOM version of Scheduler that is used
as a fallback, e.g. Jest. The tests use Jest's fake timers API:
- `jest.runAllTimers(ms)` flushes all scheduled work, as expected
- `jest.advanceTimersByTime(ms)` flushes only callbacks that expire
within the given milliseconds.
These capabilities should be sufficient for most product tests. Because
jest's fake timers do not override performance.now or Date.now, we
assume time is constant. This means Scheduler's internal time will not
be aligned with other code that reads from `performance.now`. For finer
control, the user can override `window._sched` like we do in our tests.
We will likely publish a Jest package that has this built in.
All of these features are based on features of React's internal
scheduler. The eventual goal is to lift as much as possible out of the
React internals into the Scheduler package.
Includes some renaming of existing methods.
- `scheduleWork` is now `scheduleCallback`
- `cancelScheduledWork` is now `cancelCallback`
Priority levels
---------------
Adds the ability to schedule callbacks at different priority levels.
The current levels are (final names TBD):
- Immediate priority. Fires at the end of the outermost currently
executing (similar to a microtask).
- Interactive priority. Fires within a few hundred milliseconds. This
should only be used to provide quick feedback to the user as a result
of an interaction.
- Normal priority. This is the default. Fires within several seconds.
- "Maybe" priority. Only fires if there's nothing else to do. Used for
prerendering or warming a cache.
The priority is changed using `runWithPriority`:
```js
runWithPriority(InteractivePriority, () => {
scheduleCallback(callback);
});
```
Continuations
-------------
Adds the ability for a callback to yield without losing its place
in the queue, by returning a continuation. The continuation will have
the same expiration as the callback that yielded.
Wrapped callbacks
-----------------
Adds the ability to wrap a callback so that, when it is called, it
receives the priority of the current execution context.
* fix updateWrapper causing re-render textarea, even though their data has not changed
* fix updateWrapper causing re-render textarea, even though their data, prettier-all
* minor changes to updateWrapper, add test
* Do not bind topLevelType to dispatch
A previous change made it such that all top level event types
correspond to their associated native event string values. This commit
eliminates the .bind attached to dispatch and fixes a related flow
type.
* Add note about why casting event.type to a topLevelType is safe
* Move interactiveUpdates comment to point of assignment
* Refactor Schedule, remove React-isms
Once the API stabilizes, we will move Schedule this into a separate
repo. To promote adoption, especially by projects outside the React
ecosystem, we'll remove all React-isms from the source and keep it as
simple as possible:
- No build step.
- No static types.
- Everything is in a single file.
If we end up needing to support multiple targets, like CommonJS and ESM,
we can still avoid a build step by maintaining two copies of the same
file, but with different exports.
This commit also refactors the implementation to split out the DOM-
specific parts (essentially a requestIdleCallback polyfill). Aside from
the architectural benefits, this also makes it possible to write host-
agnostic tests. If/when we publish a version of Schedule that targets
other environments, like React Native, we can run these same tests
across all implementations.
* Edits in response to Dan's PR feedback
* Added UMD_PROFILING type to react-dom and scheduling package. Added UMD shim to schedule package.
* Added new schedule umd prod+prof bundle to API test
* Enhance dev warnings for forwardRef render function
- For 0 parameters: Do not warn because it may be due to usage of the
arguments object.
- For 1 parameter: Warn about missing the 'ref' parameter.
- For 2 parameters: This is the ideal. Do not warn.
- For more than 2 parameters: Warn about undefined parameters.
* Make test cases for forwardRef warnings more realistic
* Add period to warning sentence
* 🔥 Stop syncing the value attribute on inputs
* Eliminate some additional checks
* Remove initialValue and initialWrapper from wrapperState flow type
* Update tests with new sync logic, reduce some operations
* Update tests, add some caveats for SSR mismatches
* Revert newline change
* Remove unused type
* Call toString to safely type string values
* Add disableInputAttributeSyncing feature flag
Reverts tests to original state, adds attribute sync feature flag,
then moves all affected tests to ReactFire-test.js.
* Revert position of types in toStringValues
* Invert flag on number input blur
* Add clarification why double blur is necessary
* Update ReactFire number cases to be more explicite about blur
* Move comments to reduce diff size
* Add comments to clarify behavior in each branch
* There is no need to assign a different checked behavior in Fire
* Use checked reference
* Format
* Avoid precomputing stringable values
* Revert getToStringValue comment
* Revert placement of undefined in getToStringValue
* Do not eagerly stringify value
* Unify Fire test cases with normal ones
* Revert toString change. Only assign unsynced values when not nully
* Fix warning without stack for ie9
Where console methods like log, error etc. don't have 'apply' method.
Because of the lot of tests already expect that exactly console['method']
will be called - had to reapply references for console.error method
https://github.com/facebook/react/issues/13610
* pass parameters explicitly to avoid using .apply
which is not supported for console methods in ie9
* Minor tweaks
* add failing test
* honor displayName set on ForwardRef if available
Since React.forwardRef returns a component object, some users
(including styled-components and react-native) are starting to
decorate them with various statics including displayName.
This adjusts React's various name-getters to honor this if set and
surface the name in warnings and hopefully DevTools.
* fix typing
* Refine later
* Add home component. Async load fixtures.
This commit adds a homepage to the DOM fixtures that includes browser
testing information and asynchronously loads fixtures.
This should make it easier to find DOM testing information and keep
the payload size in check as we add more components to the fixtures.
* Adds experimental hydration fixture
This commit adds a first pass at a fixture that makes it easier to
debug the process of hydrating static markup. This is not complete:
1. It needs to be verified across multiple browsers
2. It needs to render with the current version of react
Still, it at least demonstrates the idea. A fixture like this will
also be helpful for debugging change events for hydrated inputs, which
presently do not fire if the user changes an input's text before
hydration.
* Tweak select width
* Manually join extra attributes in warning
This prevents a bug where Chrome reports `Array(n)` where `n` is the
size of the array.
* Transform with buble
* Eliminate dependencies
* Pull in react-live for better editing
* Handle encoding errors, pass react version
* Load the correct version of React
* Tweaks
* Revert style change
* Revert warning update
* Properly handle script errors. Fix dom-server CDN loading
* Fix 15.x releases
* Use postMessage to reduce latency, support older browsers
This commit makes a few tweaks to support older browsers and updates
the code transition process to use window.postMessage. This avoids
loading React on every single change.
* Fix fixture renamespacing bug
* Gracefully fallback to textarea in React 14
* Replace buble with babel, react-live with codemirror
* Simplify layout to resolve production code-mirror issues
* Tweak height rules for code-mirror
* Update theme to paraiso
* Format Code.js
* Adjust viewport to fix CodeMirror resize issue in production build
* Eliminate react-code-mirror
* Improve error state. Make full stack collapsable
* Add link to license in codemirror stylesheet
* Make code example more concise
* Replace "Hydrate" with "Auto-hydrate" for clarity
* Remove border below hydration header
* Rename query function in render.js
* Use Function(code) to evaluate hydration fixture
For clarity, and so that the Fixture component does not need to be
assigned to the window, this commit changes the way code is executed
such that it evaluates using a Function constructor.
* Extend hydration fixture to fill width. Design adjustments
This commit extends the hydration fixture such that it takes up the
full screen view. To accomplish this, the container that wraps all
fixtures has been moved to the FixtureSet component, utilized by all
other fixtures.
* Improve error scroll state
* Lazy load CodeMirror together before executing
This commit fixes an issue where CodeMirror wouldn't layout correctly
in production builds because the editor executes before the stylesheet
loaded. CodeMirror needs layout information, and was rendering
off-screen without correct CSS layout measurements.
* Fix indentation on error message
* Do not highlight errors from Babel. Add setPrototypeOf polyfill
This commit fixes an error in Safari 7.1 where Chalk highlighted Babel
errors caused a crash when setPrototypeOf was called within the
library.
This is also an issue on IE9, however this fix does not resolve issues
in that browser.
* Increase resilience to bad errors in Hydration fixture
- Reverts highlighting change. Polyfilling Safari 7.1 is sufficient
- Do not render a details tag in IE9
* Add regression test for persistent bailout bug
* Fork more logic into updateHostComponent
This is mostly copy paste. But I added a bailout only to mutation mode. Persistent mode doesn't have that props equality bailout anymore, so the Fabric test now passes.
* Add failing test for persistence host minimalism
* Add bailouts to the persistent host updates
* Added blessed production+profiling entry point for schedule/tracking
* Add invariant when profiling renderer is used with non-profiling schedule/tracking
* Remove injectComponentTree from unstable-native-dependencies, add
EventPluginHub
injectComponentTree was exposed for react-native-web, but wasn't
actually being used by the project. They were using EventPluginHub
through ReactDOM's secret internals, but that was removed in https://github.com/facebook/react/pull/13539
This removes the unused injectComponentTree export, refactors the
ResponderEventPlugin test so it doesn't depend on it, and also adds
EventPluginHub to the exports to unbreak react-native-web
* Re-export injectEventPluginsByName from ReactDOM internals
In https://github.com/facebook/react/pull/13394, I encountered an
issue where the ReactDOMServerIntegrationForm test suite consumed
sufficient memory to crash CircleCI. Breaking up this test suite by
form element type resolved the issue.
This commit performs that change separate from the Symbol/Function
stringification changes in #13394.
* Removed 'private' ref methods from UMD forwarding API
* Replaced getters with exported constants since they were no longer referenced for UMD forwarding
IE 11 parses & normalizes the style attribute as opposed to other
browsers. It adds spaces and sorts the properties in some
non-alphabetical order. Handling that would require sorting CSS
properties in the client & server versions or applying
`expectedStyle` to a temporary DOM node to read its `style` attribute
normalized. Since it only affects IE, we're skipping style warnings
in that browser completely in favor of doing all that work.
Fixes#11807
This is documenting the current order in which events are dispatched
when interacting with native document listeners and other React apps.
For more context, check out #12919.
* Merged interaction-tracking package into react-scheduler
* Add tracking API to FB+www builds
* Added Rollup plugin to strip no-side-effect imports from Rollup bundles
* Re-bundle tracking and scheduling APIs on SECRET_INTERNALS object for UMD build (and provide lazy forwarding methods)
* Added some additional tests and fixtures
* Fixed broken UMD fixture in master (#13512)
* Updated suspense fixture to use new interaction-tracking API
* Integrated Profiler API with interaction-tracking API (and added tests)
* Pass interaction Set (rather than Array) to Profiler onRender callback
* Removed some :any casts for enableInteractionTracking fields in FiberRoot type
* Refactored threadID calculation into a helper method
* Errors thrown by interaction tracking hooks use unhandledError to rethrow more safely.
Reverted try/finally change to ReactTestRendererScheduling
* Added a $FlowFixMe above the FiberRoot :any cast
* Reduce overhead from calling work-started hook
* Remove interaction-tracking wrap() references from unwind work in favor of managing suspense/interaction continuations in the scheduler
* Moved the logic for calling work-started hook from performWorkOnRoot() to renderRoot()
* Add interaction-tracking to bundle externals. Set feature flag to __PROFILE__
* Renamed the freezeInteractionCount flag and replaced one use-case with a method param
* let -> const
* Updated suspense fixture to handle recent API changes
* Add a failing test for deferredUpdates not being respected
* Don't consider deferred updates interactive
* Remove now-unnecessary setTimeout hack in the fixture
* Remove unstable_deferredUpdates
* Remove addEventListener check in isEventSupported
All browsers we support also support addEventListener, so this check is
unncessary
* Remove capture argument from isEventSupported
There's no good reason for this to be an object. This refactors it so
that we just use three variables instead. We can avoid the property reads/writes and also minify better, since property names don't get mangled but variables do.
* Do not toLowerCase lists of lowercase words
* Add notes about downcasing to DOMProperty.js
* Use consistent comment breakout
* Make toLowerCase more obvious
* Removed enableInteractionTrackingObserver as a separate flag; only enableInteractionTracking is used now
* Added interaction-tracking/subscriptions bundle and split tests
* Added multi-subscriber support
* Moved subscriptions behind feature flag
* Fixed bug with wrap() parameters and added test
* Replaced wrap arrow function
* Replace some namespace imports
* Simplify the controlled component injection
* Simplify the batching injection
* Simplify the component tree injection
* Add a regression test for 12643#issuecomment-413727104
* Don't diff memoized host components
* Add regression tests for noop renderer
* No early return
* Strengthen the test for host siblings
* Flow types
Lazily starts loading a component the first time it's rendered. The
implementation is fairly simple and could be left to userspace, but since
this is an important use case, there's value in standardization.
* Accept promise as element type
On the initial render, the element will suspend as if a promise were
thrown from inside the body of the unresolved component. Siblings should
continue rendering and if the parent is a Placeholder, the promise
should be captured by that Placeholder.
When the promise resolves, rendering resumes. If the resolved value
has a `default` property, it is assumed to be the default export of
an ES module, and we use that as the component type. If it does not have
a `default` property, we use the resolved value itself.
The resolved value is stored as an expando on the promise/thenable.
* Use special types of work for lazy components
Because reconciliation is a hot path, this adds ClassComponentLazy,
FunctionalComponentLazy, and ForwardRefLazy as special types of work.
The other types are not supported, but wouldn't be placed into a
separate module regardless.
* Resolve defaultProps for lazy types
* Remove some calls to isContextProvider
isContextProvider checks the fiber tag, but it's typically called after
we've already refined the type of work. We should get rid of it. I
removed some of them in the previous commit, and deleted a few more
in this one. I left a few behind because the remaining ones would
require additional refactoring that feels outside the scope of this PR.
* Remove getLazyComponentTypeIfResolved
* Return baseProps instead of null
The caller compares the result to baseProps to see if anything changed.
* Avoid redundant checks by inlining getFiberTagFromObjectType
* Move tag resolution to ReactFiber module
* Pass next props to update* functions
We should do this with all types of work in the future.
* Refine component type before pushing/popping context
Removes unnecessary checks.
* Replace all occurrences of _reactResult with helper
* Move shared thenable logic to `shared` package
* Check type of wrapper object before resolving to `default` export
* Return resolved tag instead of reassigning
* fix: do not reconcile children that are iterable functions
* fix: remove fit
* Refactor comparison to exclude anything that isnt an object
* Remove redundant undefined check
* Don't stop context traversal at matching consumers
Originally, the idea was to time slice the traversal. This worked when
there was only a single context type per consumer.
Now that each fiber may have a list of context dependencies, including
duplicate entries, that optimization no longer makes sense – we could
end up scanning the same subtree multiple times.
* Remove changedBits from context object and stack
Don't need it anymore, yay
Before this change in development window.event was overridden
in invokeGuardedCallback.
After this change window.event is preserved in the browsers that
support it.
* Warn when the string "false" is the value of a boolean DOM prop
* Only warn on exact case match for "false" in DOM boolean props
* Warn on string "true" as well as "false" in DOM boolean props
* Clarify warnings on "true" / "false" values in DOM boolean props
`flow-coverage-report` stopped working after Flow was set to run for each renderer separately (#12846). As discussed in #13393, this is hard to fix without adding complexity to `.flowconfig`'s generation.
* wip: ignore symbols and functions in select tag
* fix: Use ToStringValue as a maybe type
* refactor: remove unnecessary test
* refactor: remove implicit return from tests
* Add home component. Async load fixtures.
This commit adds a homepage to the DOM fixtures that includes browser
testing information and asynchronously loads fixtures.
This should make it easier to find DOM testing information and keep
the payload size in check as we add more components to the fixtures.
* Update browser support fields
* Tweak select width
* Fix typo
* Report actual error when fixture fails to load
* Update browser information
* Update browserstack subscription info
* English
* Switch let for const in fixture loader
* refactor: move getSafeValue to separate file
* fix(?): ReactDOMFiberTextarea sanitization for symbols and functions
* tests: add TODOs for warnings
* fix: restore accidentally removed test
* fix: remove redundant logic for initialValue
* refactor: integrate SafeValue typings into textarea
* fix: restore stringified newValue for equality check
* fix: remove getSafeValue from hostProps
* refactor: SafeValue -> ToStringValue
* refactor: update TODO comment in test file
* refactor: no need to convert children to ToStringValue
* Manually join extra attributes in warning
This prevents a bug where Chrome reports `Array(n)` where `n` is the
size of the array.
* Prettier
* Stringify all %s replaced symbols in warning
* Eliminate extra string coercion
* Pass args through with spread, convert all arguments to strings
* Rename strings to stringArgs
* Remove e.suppressReactErrorLogging check before last resort throw
It's unnecessary here. It was here because this method called console.error().
But we now rethrow with a clean stack, and that's worth doing regardless of whether the logging is silenced.
* Don't print error addendum if 'error' event got preventDefault()
* Add fixtures
* Use an expando property instead of a WeakSet
* Make it a bit less fragile
* Clarify comments
Following up on the changes I made in #13367, @gaearon suggest that
"safe" could be read as necessary for security. To avoid misleading a
reader, I'm changing the name.
A few names where discussed in the previous PR. I think `ToStringValue`
makes sense since the value itself is not a string yet but an opaque
type that can be cast to a string. For the actual string concatenation,
I've used `toString` now to avoid confusion: `toStringValueToString`
is super weird and it's namespaced anyhow.
Definitely open for suggestions here. :) I'll wait until we wrap up
#13362 and take care of rebase afterwards.
* Improve soundness of ReactDOMFiberInput typings
This is an attempt in improving the soundness for the safe value cast
that was added in #11741. We want this to avoid situations like [this
one](https://github.com/facebook/react/pull/13362#discussion_r209380079)
where we need to remember why we have certain type casts. Additionally
we can be sure that we only cast safe values to string.
The problem was `getSafeValue()`. It used the (deprecated) `*` type to
infer the type which resulted in a passing-through of the implicit `any`
of the props `Object`. So `getSafeValue()` was effectively returning
`any`.
Once I fixed this, I found out that Flow does not allow concatenating
all possible types to a string (e.g `"" + false` fails in Flow). To
fix this as well, I've opted into making the SafeValue type opaque and
added a function that can be used to get the string value. This is sound
because we know that SafeValue is already checked.
I've verified that the interim function is inlined by the compiler and
also looked at a diff of the compiled react-dom bundles to see if I've
regressed anything. Seems like we're good.
* Fix typo
* Bring back onSubmit bubble test
I found a test that was written more than 5 years ago and probably never
run until now. The behavior still works, although the API changed quite
a bit over the years.
Seems like this was part of the initial public release already:
75897c2dcd (diff-1bf5126edab96f3b7fea034cd3b0c742R31)
* Rely on bubbling for submit and reset events
* Update dom fixture lockfile
* Revet rollup results
Whoopsie.
* Simplified profiler actualDuration timing
While testing the new DevTools profiler, I noticed that sometimes– in larger, more complicated applications– the actualDuration value was incorrect (either too large, or sometimes negative). I was not able to reproduce this in a smaller application or test (which sucks) but I assume it has something to do with the way I was tracking render times across priorities/roots. So this PR replaces the previous approach with a simpler one.
* Changed bubbling logic after chatting out of band with Andrew
* Replaced __PROFILE__ with feature-flag conditionals in test
* Updated test comment
Remove 'async', 'bundle-collapser', 'del', 'derequire', 'escape-string-regexp', 'git-branch', 'gzip-js',
'merge-stream', 'platform', 'run-sequence' & 'yargs'.
Most of them were used in the old Grunt build system.
This ends up removing 32 packages, according to yarn.lock.
* Add support for auxclick event
* Add to simpleEventPLugin
* Add auxclick as interactive event type in SimpleEventPlugin
* Update ReactTestUtils fixture to include auxClick
* fix selectedIndex in postMountWrapper in ReactDOMFiberSelected
* comment in ReactDomFiberSelect in postMountWrapper for selectedIndex fix
* test for selectedIndex fix
* set boolean value for multiple
* Revert the fix which has been fixed on master
* Make sure that `select` has `multiple` attribute set to appropriate state before appending options
fixes#13222
* Add dom test fixture to test long multiple select scrolling to the first selected option
fixes#13222
* typo fix
* update comment
remove redundant conversion to bool type
* change a way of assigning property to domElement
* Remove unused ref on select fixture form
* Prefer node’s window and document over globals
* Support active elements in nested browsing contexts
* Avoid invoking defaultView getter unnecessarily
* Prefer node’s window and document over globals
* Support active elements in nested browsing contexts
* Avoid invoking defaultView getter unnecessarily
* Implement selection event fixtures
* Prefer node’s window and document over globals
* Avoid invoking defaultView getter unnecessarily
* Fix react-scripts to work with alphas after 16.0.0
The current logic just checks if the version is an alpha with a major version of 16 to account for weirdness with the 16 RC releases, but now we have alphas for newer minor releases that don't have weirdness
* Run prettier on new selection events fixtures
* Add fixture for onSelect in iframes, remove DraftJS fixture
The DraftJs fixture wasn't really working in all supported browsers anyways, so just drop it and try to cover our bases without using it directly
* Purge remnants of draft.js from fixtures
* Use prop-types import instead of window global
* Make fixtures’ Iframe component Firefox-compatible
* Fix switch case for SelectionEventsFixture
* Remove draft.js / immutable.js dependencies
* Cache owner doc as var to avoid reading it twice
* Add documentation for getActiveElementDeep to explain try/catch
Add documentation for getActiveElementDeep to explain try/catch
* Ensure getActiveElement always returns DOM element
* Tighten up isNode and isTextNode
* Remove ie8 compatibility
* Specify cross-origin example in getActiveElementDeep
* Revert back to returning null if document is not defined
* Add a regression test for #13188
* Replace console.error() with a throw in setTimeout() as last resort
* Fix lint and comment
* Fix tests to check we throw after all
* Fix build tests
* Inject react-art renderer into react-devtools
This commit makes react-art renderer to be injected to react-devtools,
so that component tree of the renderer is presented on debug panel of browser.
* Update ReactART.js
* [#13130] Add a more helpful message when passing an element to createElement()
* better conditional flow
* update after review
* move last condition inside last else clause
* Added test case
* compare 25132typeof to REACT_ELEMENT_TYPE
* runs prettier
* remove unrelated changes
* Tweak the message
* Make option children a text content by default
fix#11911
* Apply requested changes
- Remove meaningless comments
- revert scripts/rollup/results.json
* remove empty row
* Update comment
* Add a simple unit-test
* [WIP: no flow] Pass through hostContext
* [WIP: no flow] Give better description for test
* Fixes
* Don't pass hostContext through
It ended up being more complicated than I thought.
* Also warn on hydration
* Remove 'warning' module from the JS scheduler
**what is the change?:**
See title
**why make this change?:**
Internally the 'warning' module has some dependencies which we want to
avoid pulling in during the very early stages of initial pageload. It is
creating a cyclical dependency.
And we wanted to remove this dependency anyway, because this module
should be kept small and decoupled.
**test plan:**
- Tested the exact same change internally in Facebook.com
- Ran unit tests
- Tried out the fixture
**issue:**
Internal task T31831021
* check for console existence before calling console.error
* Move DEV check into separate block
This is likely the common case because individual component authors
will casually call read on common contexts like the cache, or cache
provider.
Where as libraries like Relay only call read once per fragment and pass
all observed bits at once.
* Store list of contexts on the fiber
Currently, context can only be read by a special type of component,
ContextConsumer. We want to add support to all fibers, including
classes and functional components.
Each fiber may read from one or more contexts. To enable quick, mono-
morphic access of this list, we'll store them on a fiber property.
* Context.unstable_read
unstable_read can be called anywhere within the render phase. That
includes the render method, getDerivedStateFromProps, constructors,
functional components, and context consumer render props.
If it's called outside the render phase, an error is thrown.
* Remove vestigial context cursor
Wasn't being used.
* Split fiber.expirationTime into two separate fields
Currently, the `expirationTime` field represents the pending work of
both the fiber itself — including new props, state, and context — and of
any updates in that fiber's subtree.
This commit adds a second field called `childExpirationTime`. Now
`expirationTime` only represents the pending work of the fiber itself.
The subtree's pending work is represented by `childExpirationTime`.
The biggest advantage is it requires fewer checks to bailout on already
finished work. For most types of work, if the `expirationTime` does not
match the render expiration time, we can bailout immediately without
any further checks. This won't work for fibers that have
`shouldComponentUpdate` semantics (class components), for which we still
need to check for props and state changes explicitly.
* Performance nits
Optimize `readContext` for most common case
* Add a test that StrictMode shows up in the component stack
The SSR test passes. The client one doesn't.
* Include Modes in component stack
* Update other tests to include modes
Adds custom Jest matchers that help with writing async tests:
- `toFlushThrough`
- `toFlushAll`
- `toFlushAndThrow`
- `toClearYields`
Each one accepts an array of expected yielded values, to prevent
false negatives.
Eventually I imagine we'll want to publish this on npm.
* Add a repro case for profiler unwinding
This currently fails the tests due to an unexpected warning.
* Add a regression test for context stack
* Simplify the first test case
* Update nextUnitOfWork inside completeUnitOfWork()
The bug was caused by a structure like this:
</Provider>
</div>
</errorInCompletePhase>
We forgot to update nextUnitOfWork so it was still pointing at Provider when errorInCompletePhase threw. As a result, we would try to unwind from Provider (rather than from errorInCompletePhase), and thus pop the Provider twice.
The `yield` method isn't tied to any specific root. Putting this
on the main export enables test components that are not within scope
to yield even if they don't have access to the currently rendering
root instance. This follows the pattern established by ReactNoop.
Added a `clearYields` method, too, for reading values that were yielded
out of band. This is also based on ReactNoop.
* Revert #5947 and disable the test
* Fix isDefaultPrevented and isPropagationStopped to not get nulled
This was a bug introduced by #5947. It's very confusing that they become nulled while stopPropagation/preventDefault don't.
* Add a comment
* Run Prettier
* Fix grammar
* Fix Portal unmount
Before that change, currentParent is not set as a container even if it should so it break on react-native and probably other custom renderers
* Assert that *ToContainer() methods receive containers
* Add regression tests
* Add comments
This is a leftover from #13161 that I forgot to include.
It ensures we don't accidentally write code in the old way and end up passing the stack twice.
* Use %s in the console calls
* Add shared/warningWithStack
* Convert some warning callsites to warningWithStack
* Use warningInStack in shared utilities and remove unnecessary checks
* Replace more warning() calls with warningWithStack()
* Fixes after rebase + use warningWithStack in react
* Make warning have stack by default; warningWithoutStack opts out
* Forbid builds that may not use internals
* Revert newly added stacks
I changed my mind and want to keep this PR without functional changes. So we won't "fix" any warnings that are already missing stacks. We'll do it in follow-ups instead.
* Fix silly find/replace mistake
* Reorder imports
* Add protection against warning argument count mismatches
* Address review
* Suspending inside a constructor outside of strict mode
Outside of strict mode, suspended components commit in an incomplete
state, then are synchronously deleted in a subsequent commit. If a
component suspends inside the constructor, it mounts without
an instance.
This breaks at least one invariant: during deletion, we assume that
every mounted component has an instance, and check the instance for
the existence of `componentWillUnmount`.
Rather than add a redundant check to the deletion of every class
component, components that suspend inside their constructor and outside
of strict mode are turned into empty functional components before they
are mounted. This is a bit weird, but it's an edge case, and the empty
component will be synchronously unmounted regardless.
* Do not fire lifecycles of a suspended component
In non-strict mode, suspended components commit, but their lifecycles
should not fire.
Instead of wrapping ReactDebugCurrentFrame.getStackAddendum() call into a custom wrapper inside ReactElementValidator, "teach" the main ReactDebugCurrentFrame.getStackAddendum() to take currently validating element into account.
* Fix getComponentName() for types with nested $$typeof
* Temporarily remove Profiler ID from messages
* Change getComponentName() signature to take just type
It doesn't actually need the whole Fiber.
* Remove getComponentName() forks in isomorphic and SSR
* Remove unnecessary .type access where we already have a type
* Remove unused type
* Remove event simulation of onChange events
It’s time to get rid of even more `ReactTestUtils.Simulate`s. In this PR
we remove the event simulation from all onChange tests. To do this, we
have to get a setter to the untracked value/checked props.
All remaining `ReactTestUtils.Simulate` calls are either testing
ReactTestUtils or assert that they do/don't throw.
* Use input instead of change event for all but checkbox, radio, and select
`React$ElementRef<T>` is the type of the ref _instance_ for a component of type T, whereas `React$Ref<T>` is the type of the ref _prop_ for a component of type T, which seems to be the intended type here.
* Refactor ReactDebugCurrentFiber to use named exports
This makes the difference between it and ReactFiberCurrentFrame a bit clearer.
ReactDebugCurrentFiber is Fiber's own implementation.
ReactFiberCurrentFrame is the thing that holds a reference to the current implementation and delegates to it.
* Unify ReactFiberComponentTreeHook and ReactDebugCurrentFiber
Conceptually they're very related.
ReactFiberComponentTreeHook contains implementation details of reading Fiber's stack (both in DEV and PROD).
ReactDebugCurrentFiber contained a reference to the current fiber, and used the above utility.
It was confusing when to use which one. Colocating them makes it clearer what you could do with each method.
In the future, the plan is to stop using these methods explicitly in most places, and instead delegate to a warning system that includes stacks automatically. This change makes future refactorings simpler by colocating related logic.
* Rename methods to better reflect their meanings
Clarify which are DEV or PROD-only.
Clarify which can return null.
I believe the "work in progress only" was a mistake. I introduced it because I wasn't sure what guarantees we have around .return. But we know for sure that following a .return chain gives us an accurate stack even if we get into WIP trees because we don't have reparenting. So it's fine to relax that naming.
* Rename ReactDebugCurrentFiber -> ReactCurrentFiber
It's not completely DEV-only anymore.
Individual methods already specify whether they work in DEV or PROD in their names.
An infinite update loop can occur when an update is scheduled inside a
lifecycle method, which causes a re-render, which schedules another
update, and so on. Before the Fiber rewrite, this scenario resulted in a
stack overflow.
Because Fiber does not use the JavaScript stack, we maintain our own
counter to track the number of nested, synchronous updates. We throw an
error if the limit is exceeded.
The nested update limit is currently 1000. I chose this number
arbitrarily, certain that there was no valid reason for a component to
schedule so many synchronous re-renders.
I think we can go much lower. This commit decreases the limit to 50. I
believe this is still comfortably above the reasonable number of
synchronous re-renders a component may perform.
This will make it easier for developers to debug infinite update bugs
when they occur.
A recent change to the scheduler caused a regression when scheduling
many updates within a single batch. Added a test case that would
have caught this.
This is an unobservable change to all but the (under development) DevTools Profiler plugin. It is being done so that the plugin can safely feature detect a version of React that supports it. The profiler API has existed since the 16.4.0 release, but it did not support the DevTools plugin prior to PR #13058.
Side note: I am not a big fan of the term "base duration". Both it and "actual duration" are kind of awkward and vague. If anyone has suggestions for better names– this is the best time to bikeshed about them.
* Reset ReactProfilerTimer's DEV-only Fiber stack after an error
* Added ReactNoop functionality to error during "complete" phase
* Added failing profiler stack unwinding test
* Potential fix for unwinding time bug
* Renamed test
* Don't record time until complete phase succeeds. Simplifies unwinding.
* Expanded ReactProfilerDevToolsIntegration-test coverage a bit
* Added unstable_flushWithoutCommitting method to noop renderer
* Added failing multi-root/batch test to ReactProfiler-test
* Beefed up tests a bit and added some TODOs
* Profiler timer differentiates between batched commits and in-progress async work
This was a two-part change:
1) Don't count time spent working on a batched commit against yielded async work.
2) Don't assert an empty stack after processing a batched commit (because there may be yielded async work)
This is kind of a hacky solution, and may have problems that I haven't thought of yet. I need to commit this so I can mentally clock out for a bit without worrying about it. I will think about it more when I'm back from PTO. In the meanwhile, input is welcome.
* Removed TODO
* Replaced FiberRoot map with boolean
* Removed unnecessary whitespace edit
Changed the API to match what we've been using in our latest discussions.
Our tentative plans are for <Placeholder> to automatically hide the timed-out
children, instead of removing them, so their state is not lost. This part is
not yet implemented. We'll likely have a lower level API that does not include
the hiding behavior. This is also not yet implemented.
We can support components that suspend outside of an async mode tree
by immediately committing their placeholders.
In strict mode, the Timeout acts effectively like an error boundary.
Within a single render pass, we unwind to the nearest Timeout and
re-render the placeholder view.
Outside of strict mode, it's not safe to unwind and re-render the
siblings without committing. (Technically, this is true of error
boundaries, too, though probably not a huge deal, since we don't support
using error boundaries for control flow (yet, at least)). We need to be
clever. What we do is pretend the suspended component rendered null.*
There's no unwinding. The siblings commit like normal.
Then, in the commit phase, schedule an update on the Timeout to
synchronously re-render the placeholder. Although this requires an extra
commit, it will not be observable. And because the siblings were not
blocked from committing, they don't have to be strict mode compatible.
Another caveat is that if a component suspends during an async render,
but it's captured by a non-async Timeout, we need to revert to sync
mode. In other words, if any non-async component renders, the entire
tree must complete and commit without yielding.
* The downside of rendering null is that the existing children will be
deleted. We should hide them instead. I'll work on this in a follow-up.
* Prepare placeholders before timing out
While a tree is suspended, prepare for the timeout by pre-rendering the
placeholder state.
This simplifies the implementation a bit because every render now
results in a completed tree.
* Suspend inside an already timed out Placeholder
A component should be able to suspend inside an already timed out
placeholder. The time at which the placeholder committed is used as
the start time for a subsequent suspend.
So, if a placeholder times out after 3 seconds, and an inner
placeholder has a threshold of 2 seconds, the inner placeholder will
not time out until 5 seconds total have elapsed.
* Fix crash during server render.
setTimeout and clearTimeout may not be available in some server-render environments (such as ChakraCore in React.NET), and loading ReactScheduler.js will cause a crash unless the existence of the variables are checked via a typeof comparison.
https://github.com/reactjs/React.NET/issues/555
The crash did not occur in 16.4.0, and the change appears to have been introduced here: https://github.com/facebook/react/pull/12931/files#diff-bbebc3357e1fb99ab13ad796e04b69a6L47
I tested this by using yarn link and running it with a local copy of React.NET. I am unsure the best way to unit test this change, since assigning null to `setTimeout` causes an immediate crash within the Node REPL.
* Fix flow errors and log warning if setTimeout / clearTimeout are
not defined / not a function.
* Use invariant to assert setTimeout / clearTimeout are functions
* Remove use of invariant
* Explain
* Add fixture test for schedule running when tab is backgrounded
**what is the change?:**
Just adding a test to the fixture, where we can easily see whether
scheduled callbacks are called after switching away from the fixture
tab.
**why make this change?:**
We are about to fix the schedule module so that it still runs even when
the tab is in the backround.
**test plan:**
Manually tested the fixture, verified that it works as expected and
right now callbacks are not called when the tab is in the background.
**issue:**
Internal task T30754186
* Fall back to 'setTimeout' when 'requestAnimationFrame' is not called
**what is the change?:**
If 'requestAnimationFrame' is not called for 100ms we fall back to
'setTimeout' to schedule the postmessage.
**why make this change?:**
When you start loading a page, and then switch tabs,
'requestAnimationFrame' is throttled or not called until you come back
to that tab. That means React's rendering, any any other scheduled work,
are paused.
Users expect the page to continue loading, and rendering is part of the
page load in a React app. So we need to continue calling callbacks.
**test plan:**
Manually tested using the new fixture test, observed that the callbacks
were called while switched to another tab. They were called more
slowly, but that seems like a reasonable thing.
**issue:**
Internal task T30754186
* make arguments more explicit
* Fixes children when using dangerouslySetInnerHtml in a selected <option>
This fixes an inadvertent cast of undefined children to an empty string when creating an option tag that will be selected:
```
<select defaultValue="test">
<option value='test' dangerouslySetInnerHTML={{ __html: '‏ test'}} />
</select>
```
This causes an invariant error because both children and dangerouslySetInnerHTML are set.
* PR fix and new ReactDOMServerIntegrationForms test
* Account for null case
* Combine test cases into single test
* Add tests for failure cases
* Fix lint
* react-test-renderer injects itself into DevTools if present
* Fibers are always opted into ProfileMode if DevTools is present
* Added simple test for DevTools + always profiling behavior
* Do not add additional work to a batch that is already rendering.
Otherwise, the part of the tree that hasn't rendered yet will receive
the latest state, but the already rendered part will show the state
as it was before the intervening update.
* Reduce non-helpfulness of comments
Expiration times are computed by adding to the current time (the start
time). However, if two updates are scheduled within the same event, we
should treat their start times as simultaneous, even if the actual clock
time has advanced between the first and second call.
In other words, because expiration times determine how updates are
batched, we want all updates of like priority that occur within the same
event to receive the same expiration time. Otherwise we get tearing.
We keep track of two separate times: the current "renderer" time and the
current "scheduler" time. The renderer time can be updated whenever; it
only exists to minimize the calls performance.now.
But the scheduler time can only be updated if there's no pending work,
or if we know for certain that we're not in the middle of an event.
* Inline fbjs/lib/emptyObject
* Explicit naming
* Compare to undefined
* Another approach for detecting whether we can mutate
Each renderer would have its own local LegacyRefsObject function.
While in general we don't want `instanceof`, here it lets us do a simple check: did *we* create the refs object?
Then we can mutate it.
If the check didn't pass, either we're attaching ref for the first time (so we know to use the constructor),
or (unlikely) we're attaching a ref to a component owned by another renderer. In this case, to avoid "losing"
refs, we assign them onto the new object. Even in that case it shouldn't "hop" between renderers anymore.
* Clearer naming
* Add test case for strings refs across renderers
* Use a shared empty object for refs by reading it from React
* Remove string refs from ReactART test
It's not currently possible to resetModules() between several renderers
without also resetting the `React` module. However, that leads to losing
the referential identity of the empty ref object, and thus subsequent
checks in the renderers for whether it is pooled fail (and cause assignments
to a frozen object).
This has always been the case, but we used to work around it by shimming
fbjs/lib/emptyObject in tests and preserving its referential identity.
This won't work anymore because we've inlined it. And preserving referential
identity of React itself wouldn't be great because it could be confusing during
testing (although we might want to revisit this in the future by moving its
stateful parts into a separate package).
For now, I'm removing string ref usage from this test because only this is
the only place in our tests where we hit this problem, and it's only
related to string refs, and not just ref mechanism in general.
* Simplify the condition
In async mode, events are interleaved with rendering. If one of those
events mutates state that is later accessed during render, it can lead
to inconsistencies/tearing.
Restarting the render from the root is often sufficient to fix the
inconsistency. We'll flush the restart synchronously to prevent yet
another mutation from happening during an interleaved event.
We'll only restart during an async render. Sync renders are already
sync, so there's no benefit in restarting. (Unless a mutation happens
during the render phase, but we don't support that.)
* onFatal, onComplete, onSuspend, onYield
For every call to renderRoot, one of onFatal, onComplete, onSuspend,
and onYield is called upon exiting. We use these in lieu of returning a
tuple. I've also chosen not to inline them into renderRoot because these
will eventually be lifted into the renderer.
* Suspended high pri work forces lower priority work to expire early
If an error is thrown, and there is lower priority pending work, we
retry at the lower priority. The lower priority work should expire
at the same time at which the high priority work would have expired.
Effectively, this increases the priority of the low priority work.
Simple example: If an error is thrown during a synchronous render, and
there's an async update, the async update should flush synchronously in
case it's able to fix the error. I've added a unit test for
this scenario.
User provided timeouts should have the same behavior, but I'll leave
that for a future PR.
* Add isUsingKoreanIME function to check if a composition event was triggered by Korean IME
* Add Korean IME check alongside useFallbackCompositionData and disable fallback mode with Korean IME
We need a different "component tree" thingy for Fabric.
A lot of this doesn't really make much sense in a persistent world but
currently we can't dispatch events to memoizedProps on a Fiber since
they're pooled. Also, it's unclear what the semantics should be when we
dispatch an event that happened when the old props were in effect but now
we have new props already.
This implementation tries to use the last committed props but also fails
at that because we don't have a commit hook in the persistent mode.
However, at least it doesn't crash when dispatching. :)
* Remove rAF fork
**what is the change?:**
Undid https://github.com/facebook/react/pull/12837
**why make this change?:**
We originally forked rAF because we needed to pull in a particular
version of rAF internally at Facebook, to avoid grabbing the default
polyfilled version.
The longer term solution, until we can get rid of the global polyfill
behavior, is to initialize 'schedule' before the polyfilling happens.
Now that we have landed and synced
https://github.com/facebook/react/pull/12900 successfully, we can
initialize 'schedule' before the polyfill runs.
So we can remove the rAF fork. Here is how it will work:
1. Land this PR on Github.
2. Flarnie will quickly run a sync getting this change into www.
3. We delete the internal forked version of
'requestAnimationFrameForReact'.
4. We require 'schedule' in the polyfill file itself, before the
polyfilling happens.
**test plan:**
Flarnie will manually try the above steps locally and verify that things
work.
**issue:**
Internal task T29442940
* fix nits
* fix tests, fix changes from rebasing
* fix lint
* Remove enableSuspense flag from PendingPriority module
We're going to use this for suspending on error, too.
* Retry on error if there's lower priority pending work
If an error is thrown, and there's lower priority work, it's possible
the lower priority work will fix the error. Retry at the lower priority.
If an error is thrown and there's no more work to try, handle the error
like we normally do (trigger the nearest error boundary).
* Use native event dispatching instead of Simulate or SimulateNative
In #12629 @gaearon suggested that it would be better to drop usage of
`ReactTestUtils.Simulate` and `ReactTestUtils.SimulateNative`. In this
PR I’m attempting at removing it from a lot of places with only a few
leftovers.
Those leftovers can be categorized into three groups:
1. Anything that tests that `SimulateNative` throws. This is a property
that native event dispatching doesn’t have so I can’t convert that
easily. Affected test suites: `EventPluginHub-test`,
`ReactBrowserEventEmitter-test`.
2. Anything that tests `ReactTestUtils` directly. Affected test suites:
`ReactBrowserEventEmitter-test` (this file has one test that reads
"should have mouse enter simulated by test utils"),
`ReactTestUtils-test`.
3. Anything that dispatches a `change` event. The reason here goes a bit
deeper and is rooted in the way we shim onChange. Usually when using
native event dispatching, you would set the node’s `.value` and then
dispatch the event. However inside [`inputValueTracking.js`][] we
install a setter on the node’s `.value` that will ignore the next
`change` event (I found [this][near-perfect-oninput-shim] article
from Sophie that explains that this is to avoid onChange when
updating the value via JavaScript).
All remaining usages of `Simulate` or `SimulateNative` can be avoided
by mounting the containers inside the `document` and dispatching native
events.
Here some remarks:
1. I’m using `Element#click()` instead of `dispatchEvent`. In the jsdom
changelog I read that `click()` now properly sets the correct values
(you can also verify it does the same thing by looking at the
[source][jsdom-source]).
2. I had to update jsdom in order to get `TouchEvent` constructors
working (and while doing so also updated jest). There was one
unexpected surprise: `ReactScheduler-test` was relying on not having
`window.performance` available. I’ve recreated the previous
environment by deleting this property from the global object.
3. I was a bit confused that `ReactTestUtils.renderIntoDocument()` does
not render into the document 🤷
[`inputValueTracking.js`]: 392530104c/packages/react-dom/src/client/inputValueTracking.js (L79)
[near-perfect-oninput-shim]: https://sophiebits.com/2013/06/18/a-near-perfect-oninput-shim-for-ie-8-and-9.html
[jsdom-source]: 45b77f5d21/lib/jsdom/living/nodes/HTMLElement-impl.js (L43-L76)
* Make sure contains are unlinked from the document even if the test fails
* Remove unnecessary findDOMNode calls
**what is the change?:**
Basically undoes 4b2e65d32e (diff-904ceabd8a1e9a07ab1d876d843d62e1)
**why make this change?:**
We rolled out this fix internally and in open source weeks ago, and now
we're cleaning up.
**test plan:**
Ran tests and lint, and really we have been testing this because the
flag is open internally as of last week or so.
**issue:**
Internal task T29948812 has some info.
* Don’t error when returning an empty Fragment
When a fragment is reconciled, we directly move onto it’s children.
Since an empty `<React.Fragment/>` will have children of `undefined`,
this would always throw.
To fix this, we bail out in those cases.
* Test the update path as well
* Reuse existing code path
* An even more explicit solution that also fixes Flow
It looks like we accidentally removed a fallback condition for the
event target in IE9 when we dropped some support for IE8. This commit
adds the event target specific support code back to getEventTarget.js
Fixes#12506
* Fixed an issue with nested contexts unwinding when server rendering. GitHub issue #12984
* Fixed an issue with search direction and stricter false checking
* Use decrement infix operator
* Streamlined existence checks
* Streamlined assignment. Removed redundant comment. Use null for array values
* Made prettier
* Relaxed type checking and improved comment
* Improve test coverage
This commit removes a reference to inst._wrapperState, which was the
old way of tracking input state in the stack renderer.
This means we no longer need to pass the instance into the associated
function, allowing us to eliminate an exception for IE (and a TODO).
* Fix react-dom ReferenceError requestAnimationFrame in non-browser env (#13000)
The https://github.com/facebook/react/pull/12931 ( 79a740c6e3 ) broke the server-side rendering: in the `fixtures/ssr` the following error appeared from the server-side when `localhost:3000` is requested:
```
ReferenceError: requestAnimationFrame is not defined
at /__CENSORED__/react/build/node_modules/react-dom/cjs/react-dom.development.js:5232:34
at Object.<anonymous> (/__CENSORED__/react/build/node_modules/react-dom/cjs/react-dom.development.js:17632:5)
at Module._compile (module.js:624:30)
at Module._extensions..js (module.js:635:10)
at Object.require.extensions.(anonymous function) [as .js] (/__CENSORED__/react/fixtures/ssr/node_modules/babel-register/lib/node.js:152:7)
at Module.load (module.js:545:32)
at tryModuleLoad (module.js:508:12)
at Function.Module._load (module.js:500:3)
at Module.require (module.js:568:17)
at require (internal/module.js:11:18)
```
The exception pointed to this line:
```js
// We capture a local reference to any global, in case it gets polyfilled after
// this module is initially evaluated.
// We want to be using a consistent implementation.
const localRequestAnimationFrame = requestAnimationFrame;
```
**Test plan**
1. In `react` repo root, `yarn && yarn build`.
2. In `fixtures/ssr`, `yarn && yarn start`,
3. In browser, go to `http://localhost:3000`.
4. Observe the fixture page, not the exception message.
* Move the requestAnimationFrameForReact check and warning to callsites (#13000)
According to the comment by @gaearon: https://github.com/facebook/react/pull/13001#issuecomment-395803076
* Use `invariant` instead of `throw new Error`, use the same message (#13000)
According to the comment by @gaearon: https://github.com/facebook/react/pull/13001#discussion_r194133355
* Set the correct initial value on input range
* Add description and update value diff check for input range
* add isHydrating argument and tests
* update node value according to isHydrating
* Initial failing unit test for error handling in schedule
**what is the change?:**
see title
**why make this change?:**
Adding tests for the error handling behavior we are about to add. This
test is failing, which gives us the chance to make it pass.
Wrote skeletons of some other tests to add.
Unit testing this way is really hacky, and I'm also adding to the
fixture to test this in the real browser environment.
**test plan:**
Ran new test, saw it fail!
* Add fixture for testing error handling in scheduler
**what is the change?:**
Added a fixture which does the following -
logs in the console to show what happens when you use
`requestAnimationFrame` to schedule a series of callbacks and some of
them throw errors.
Then does the same actions with the `scheduler` and verifies that it
behaves in a similar way.
Hard to really verify the errors get thrown at the proper time without
looking at the console.
**why make this change?:**
We want the most authentic, accurate test of how errors are handled in
the scheduler. That's what this fixture should be.
**test plan:**
Manually verified that this test does what I expect - right now it's
failing but follow up commits will fix that.
* Handle errors in scheduler
**what is the change?:**
We set a flag before calling any callback, and then use a 'try/finally'
block to wrap it. Note that we *do not* catch the error, if one is
thrown. But, we only unset the flag after the callback successfully
finishes.
If we reach the 'finally' block and the flag was not unset, then it
means an error was thrown.
In that case we start a new postMessage callback, to finish calling any
other pending callbacks if there is time.
**why make this change?:**
We need to make sure that an error thrown from one callback doesn't stop
other callbacks from firing, but we also don't want to catch or swallow
the error because we want engineers to still be able to log and debug
errors.
**test plan:**
New tests added are passing, and we verified that they fail without this
change.
* Add more tests for error handling in scheduler
**what is the change?:**
Added tests for more situations where error handling may come up.
**why make this change?:**
To get additional protection against this being broken in the future.
**test plan:**
Ran new tests and verified that they fail when error handling fails.
* callSafely -> callUnsafely
* Fix bugs with error handling in schedule
**what is the change?:**
- ensure that we properly remove the callback from the linked list, even
if it throws an error and is timed out.
- ensure that you can call 'cancelScheduledWork' more than once and it
is idempotent.
**why make this change?:**
To fix bugs :)
**test plan:**
Existing tests pass, and we'll add more tests in a follow up commit.
* Unit tests for error handling with timed out callbacks
**what is the change?:**
More unit tests, to cover behavior which we missed; error handling of
timed out callbacks.
**why make this change?:**
To protect the future!~
**test plan:**
Run the new tests.
* Adds fixture to test timed out callbacks with scheduler
**what is the change?:**
See title
In the other error handling fixture we compare 'scheduleWork' error
handling to 'requestAnimationFrame' and try to get as close as possible.
There is no 'timing out' feature with 'requestAnimationFrame' but
effectively the 'timing out' feature changes the order in which things
are called. So we just changed the order in the 'requestAnimationFrame'
version and that works well for illustrating the behavior we expect in
the 'scheduleWork' test.
**why make this change?:**
We need more test coverage of timed out callbacks.
**test plan:**
Executed the fixture manually in Firefox and Chrome. Results looked
good.
* fix rebase problems
* make fixture compensate for chrome JS speed
* ran prettier
* Remove 'cancelled' flag on callbackConfig in scheduler, add test
**what is the change?:**
- Instead of using a 'cancelled' flag on the callbackConfig, it's easier
to just check the state of the callbackConfig inside
'cancelScheduledWork' to determine if it's already been cancelled. That
way we don't have to remember to set the 'cancelled' flag every time we
call a callback or cancel it. One less thing to remember.
- We added a test for calling 'cancelScheduledWork' more than once,
which would have failed before.
Thanks @acdlite for suggesting this in code review. :)
**why make this change?:**
To increase stability of the schedule module, increase test coverage.
**test plan:**
Existing tests pass and we added a new test to cover this behavior.
* fix typo
* Fix for Flow issues in SimpleCacheProvider
**what is the change?:**
- Fixed some flow errors which were somehow swallowed when CI
originally
- Loosen flow types to avoid issue with recursive loop in Flow; https://github.com/facebook/flow/issues/5870
**why make this change?:**
To unbreak master and unblock other changes we want to make.
**test plan:**
Flow passes!
**issue:**
https://github.com/facebook/react/issues/12941
* Fix lints
* [simple-cache-provider] Use LRU cache eviction
Max size is hard-coded to 500. In the future, we should make this
configurable per resource.
* Evict PAGE_SIZE records from cache when max limit is reached
* Do not set selection when prior selection is undefined (#12062)
`restoreSelection` did not account for input elements that have changed
type after the commit phase. The new `text` input supported selection
but the old `email` did not and `setSelection` was incorrectly trying to
restore `null` selection state.
We also extend input type check in selection capabilities to cover cases
where input type is `search`, `tel`, `url`, or `password`.
* Add link to HTML spec for element types and selection
* Add reset button to ReplaceEmailInput
This commit adds a button to restore the original state of the
ReplaceEmailInput fixture so that it can be run multiple times without
refreshing the page.
**what is the change?:**
In a recent PR we were referencing some global variables and storing
local references to them.
To make things more natural, we co-opted the original name of the global
for our local reference. To make this work with Flow, we get the
original reference from 'window.requestAnimationFrame' and assign it to
'const requestAnimationFrame'.
Sometimes React is used in an environment where 'window' is not defined
- in that case we need to use something else, or hide the 'window'
reference somewhere.
We opted to use 'global' thinking that Babel transforms would fill that
in with the proper thing.
But for some of our fixtures we are not doing that transform on the
bundle.
**why make this change?:**
I want to unbreak this on master and then investigate more about what we
should do to fix this.
**test plan:**
run `yarn build` and open the fixtures.
**issue:**
https://github.com/facebook/react/issues/12930
* Use local references to global things inside 'scheduler'
**what is the change?:**
See title
**why make this change?:**
We want to avoid initially calling one version of an API and then later
accessing a polyfilled version.
**test plan:**
Run existing tests.
* Shim ReactScheduler for www
**what is the change?:**
In 'www' we want to reference the separate build of ReactScheduler,
which allows treating it as a separate module internally.
**why make this change?:**
We need to require the ReactScheduler before our rAF polyfill activates,
in order to customize which custom behaviors we want.
This is also a step towards being able to experiment with using it
outside of React.
**test plan:**
Ran tests, ran the build, and ran `test-build`.
* Generate a bundle for fb-www
**what is the change?:**
See title
**why make this change?:**
Splitting out the 'schedule' module allows us to load it before
polyfills kick in for rAF and other APIs.
And long term we want to split this into a separate module anyway, this
is a step towards that.
**test plan:**
I'll run the sync next week and verify that this all works. :)
* ran prettier
* fix rebase issues
* Change names of variables used for holding globals
This commit fixes an issue where assigning an empty string to required
text inputs triggers the invalid state in Firefox (~60.0.1).
It does this by first comparing the initial state value to the current
value property on the text element. This:
1. Prevents the validation issue
2. Avoids an extra DOM Mutation in some cases
CI builds should always use the `--frozen-lockfile` option. It will fail the build if the lockfile is out-of-date:
> If you need reproducible dependencies, which is usually the case with the continuous integration systems, you should pass --frozen-lockfile flag.
(https://yarnpkg.com/en/docs/cli/install/)
* [schedule] Use linked list instead of queue and map for storing cbs
NOTE: This PR depends on https://github.com/facebook/react/pull/12880
and https://github.com/facebook/react/pull/12884
Please review those first, and after they land Flarnie will rebase on
top of them.
---
**what is the change?:**
See title
**why make this change?:**
This seems to make the code simpler, and potentially saves space of
having an array and object around holding references to the callbacks.
**test plan:**
Run existing tests
* minor style improvements
* refactor conditionals in cancelScheduledWork for increased clarity
* Remove 'canUseDOM' condition and fix some flow issues w/callbackID type
**what is the change?:**
- Removed conditional which fell back to 'setTimeout' when the
environment doesn't have DOM. This appears to be an old polyfill used
for test environments and we don't use it any more.
- Fixed type definitions around the callbackID to be more accurate in
the scheduler itself, and more loose in the React code.
**why make this change?:**
To get Flow passing, simplify the scheduler code, make things accurate.
**test plan:**
Run tests and flow.
* Rewrite 'cancelScheduledWork' so that Flow accepts it
**what is the change?:**
Adding verification that 'previousCallbackConfig' and
'nextCallbackConfig' are not null before accessing properties on them.
Slightly concerned because this implementation relies on these
properties being untouched and correct on the config which is passed to
'cancelScheduledWork' but I guess we already rely heavily on that for
this whole approach. :\
**why make this change?:**
To get Flow passing.
Not sure why it passed earlier and in CI, but now it's not.
**test plan:**
`yarn flow dom` and other flow tests, lint, tests, etc.
* ran prettier
* Put back the fallback implementation of scheduler for node environment
**what is the change?:**
We had tried removing the fallback implementation of `scheduler` but
tests reminded us that this is important for supporting isomorphic uses
of React.
Long term we will move this out of the `schedule` module but for now
let's keep things simple.
**why make this change?:**
Keep things working!
**test plan:**
Ran tests and flow
* Shorten properties stored in objects by sheduler
**what is the change?:**
`previousScheduledCallback` -> `prev`
`nextScheduledCallback` -> `next`
**why make this change?:**
We want this package to be smaller, and less letters means less code
means smaller!
**test plan:**
ran existing tests
* further remove extra lines in scheduler
* Moved actual time fields from Profiler stateNode to Fiber
* Record actual time for all Fibers within a ProfileMode tree
* Changed how profiler accumulates time
This change gives up on accumulating time across renders of different priority, but in exchange- simplifies how the commit phase (reset) code works, and perhaps also makes the profiling code more compatible with future resuming behavior
* Adding 'schedule' fixture
**what is the change?:**
We need to test the `schedule` module against real live browser APIs. As
a quick solution we're writing a fixture for using in manual testing.
Later we plan on adding automated browser testing, using this or a
similar fixture as the test page.
**why make this change?:**
To further solidify test coverage for `schedule` before making further
improvements/refactors to the module.
**test plan:**
`open fixtures/schedule/index.html` and inspect the results. It should
be clear that things pass.
We also temporarily broke the scheduler and verified that this fixture
demonstrates the problems.
**issue:**
Internal task T29442940
* Made fixture tests display red or green border depending on pass/fail
**what is the change?:**
Added red/green solid/dashed border for test results when using the
schedule fixture.
We also tweaked the timing of the last test because it was on the line
in terms of whether it passed or failed.
**why make this change?:**
To make it faster to use the fixture - it takes more time to read
through the results line by line and check that they match what is
expected.
**test plan:**
Looked at the fixture, and also tried modifying a test to show what it
looks like when something fails.
**what is the change?:**
Renamed some methods, and made a method to advance a frame in the test
environment.
**why make this change?:**
We often need to simulate a frame passing with some amount of idle time
or lack of idle time, and the new method makes it easier to write that
out.
**test plan:**
Run the updated tests.
Also temporarily tried breaking the scheduler and verified that the
tests will fail.
**issue:**
See internal task T29442940
* add legacy context APIs warning in strict mode
* refactor if statement and the warning message
* add other flags for type check
* add component stack tree and refactor wording
* fix the nits
* Rewrite to a switch
I find it a bit easier to follow than many comparison conditions.
* Remove unnecessary assignments
They are being assigned below anyway. This is likely a copypasta from the FOCUS/BLUR special case (which *does* need those assignments).
* Unify "cancel" and "close" cases
Their logic is identical.
* Don't listen to media events at the top
* Add a unit test for double-invoking form events
* Remove an unused case and document it in a test
The case I added was wrong (just like including this event in the top level list was always wrong).
In fact it never bubbles, even for <img>. And since we don't special case it in the <img> event
attachment logic when we create it, we never supported <img onLoadStart> at all.
We could fix it. But Chrome doesn't support it either: https://bugs.chromium.org/p/chromium/issues/detail?id=458851.
Nobody asked us for it yet. And supporting it would require attaching an extra listener to every <img>.
So maybe we don't need it? Let's document the existing state of things.
* Add a test verifying we don't attach unnecessary listeners
* Add a comment
* Add a test for submit (bubbles: false)
**what is the change?:**
Test coverage checking that callbacks are called when they time out.
This test surfaced a bug and this commit includes the fix.
I want to refine this approach, but basically we can simulate time outs
by controlling the return value of 'now()' and the argument passed to
the rAF callback.
Next we will write a browser fixture to further test this against real
browser APIs.
**why make this change?:**
Better tests will keep this module working smoothly while we continue
refactoring and improving it.
**test plan:**
Run the new tests, see that it fails without the bug fix.
We were adding a listener at the root when we weren't meant to. Blames to e96dc14059.
This now alerts once (at FORM) instead of twice (at FORM, #document):
```
var Hello = class extends React.Component {
render() {
return (
<form onSubmit={(e) => {e.preventDefault(); alert('hi ' + e.nativeEvent.currentTarget.nodeName);}}>
<button>hi</button>
</form>
);
}
};
```
* Added start time parameter to Profiler onRender callback
* Profiler also captures commit time
* Only init Profiler stateNode if enableProfilerTimer feature flag enabled
* Extract base Jest config
This makes it easier to change the source config without affecting the build test config.
* Statically import the host config
This changes react-reconciler to import HostConfig instead of getting it through a function argument.
Rather than start with packages like ReactDOM that want to inline it, I started with React Noop and ensured that *custom* renderers using react-reconciler package still work. To do this, I'm making HostConfig module in the reconciler look at a global variable by default (which, in case of the react-reconciler npm package, ends up being the host config argument in the top-level scope).
This is still very broken.
* Add scaffolding for importing an inlined renderer
* Fix the build
* ES exports for renderer methods
* ES modules for host configs
* Remove closures from the reconciler
* Check each renderer's config with Flow
* Fix uncovered Flow issue
We know nextHydratableInstance doesn't get mutated inside this function, but Flow doesn't so it thinks it may be null.
Help Flow.
* Prettier
* Get rid of enable*Reconciler flags
They are not as useful anymore because for almost all cases (except third party renderers) we *know* whether it supports mutation or persistence.
This refactoring means react-reconciler and react-reconciler/persistent third-party packages now ship the same thing.
Not ideal, but this seems worth how simpler the code becomes. We can later look into addressing it by having a single toggle instead.
* Prettier again
* Fix Flow config creation issue
* Fix imprecise Flow typing
* Revert accidental changes
**what is the change?:**
Fix a typo which caused timed out callbacks to not be called.
**why make this change?:**
This is a bug caught by tests I'm in the process of writing, and we
should fix it asap.
**test plan:**
Tests in a WIP PR - will push and share the WIP test in comments on this
PR.
* Generate Flow config on install
We'll need to do pre-renderer Flow passes with different configs.
This is the first step to get it working. We only want the original version checked in.
* Create multiple Flow configs from a template
* Run Flow per renderer
* Lint
* Revert the environment consolidation
I thought this would be a bit cleaner at first because we now have non-environment files in this directory.
But Sebastian is changing these files at the same time so I want to avoid conflicts and keep the PR more tightly scoped. Undo.
* Misc
* Lint for untyped imports and enable Flow typing in ReactFiber
* Re-enable Flow for ReactFiber and fix Flow issues
* Avoid an invariant in DEV-only code
I just introduced it, but on a second thought, it's better to keep it as a warning.
* Address review
* Temporary fix for grabbing wrong rAF polyfill in ReactScheduler
**what is the change?:**
For now...
We need to grab a slightly different implementation of rAF internally at
FB than in Open Source. Making rAF a dependency of the ReactScheduler
module allows us to fork the dependency at FB.
NOTE: After this lands we have an alternative plan to make this module
separate from React and require it before our Facebook timer polyfills
are applied. But want to land this now to keep master in a working state
and fix bugs folks are seeing at Facebook.
Thanks @sebmarkbage @acdlite and @sophiebits for discussing the options
and trade-offs for solving this issue.
**why make this change?:**
This fixes a problem we're running into when experimenting with
ReactScheduler internally at Facebook, **and* it's part of our long term
plan to use dependency injection with the scheduler to make it easier to
test and adjust.
**test plan:**
Ran tests, lint, flow, and will manually test when syncing into
Facebook's codebase.
**issue:**
See internal task T29442940
* ran prettier
**what is the change?:**
We were setting a flag after some early returns, should have set it
right away.
To be fair, it's not clear how you can hit a problem with the current
state of things. Even if a callback is cancelled, it's still in the
'pendingCallbacks' queue until the rAF runs, and we only schedule a rAF
when there are pendingCallbacks in the queue.
But since this is obviously wrong, going to fix it.
We will be adding a regression test in a follow-up PR.
**why make this change?:**
To fix a random bug which was popping up.
**test plan:**
Adding a regression unit test in a follow-up PR.
**what is the change?:**
In some cases we had defined the 'callback' as taking two arguments,
when really we meant to indicate the second argument passed to
'scheduleWork'.
**why make this change?:**
For correctness and to unblock something @gaearon is working on. A bit
surprised Flow didn't catch this in the first place.
**test plan:**
Ran tests, flow, lint.
* Rename Scheduler methods more accurately
**what is the change?:**
```
rIC -> scheduleCallback
```
We will later expose a second method for different priority level, name
TBD. Since we only have one priority right now we can delay the
bikeshedding about the priority names.
cIC -> cancelScheduledCallback
This method can be used to cancel callbacks scheduled at any priority
level, and will remain named this way.
why make this change?:
Originally this module contained a polyfill for requestIdleCallback
and cancelIdleCallback but we are changing the behavior so it's no
longer just a polyfill. The new names are more semantic and distinguish
this from the original polyfill functionality.
**test plan:**
Ran the tests
**why make this change?:**
Getting this out of the way so things are more clear.
**Coming Up Next:**
- Switching from a Map of ids and an array to a linked list for storing
callbacks.
- Error handling
* callback -> work
* update callsites in new places after rebase
* fix typo
* Add TopLevelEventTypes
* Fix `ReactBrowserEventEmitter`
* Fix EventPluginUtils
* Fix TapEventPlugin
* Fix ResponderEventPlugin
* Update ReactDOMFiberComponent
* Fix BeforeInputEventPlugin
* Fix ChangeEventPlugin
* Fix EnterLeaveEventPlugin
* Add missing non top event type used in ChangeEventPlugin
* Fix SelectEventPlugin
* Fix SimpleEventPlugin
* Fix outstanding Flow issues and move TopLevelEventTypes
* Inline a list of all events in `ReactTestUtils`
* Fix tests
* Make it pretty
* Fix completly unrelated typo
* Don’t use map constructor because of IE11
* Update typings, revert changes to native code
* Make topLevelTypes in ResponderEventPlugin injectable and create DOM and ReactNative variant
* Set proper dependencies for DOMResponderEventPlugin
* Prettify
* Make some react dom tests no longer depend on internal API
* Use factories to create top level speific generic event modules
* Remove unused dependency
* Revert exposed module renaming, hide store creation, and inline dependency decleration
* Add Flow types to createResponderEventPlugin and its consumers
* Remove unused dependency
* Use opaque flow type for TopLevelType
* Add missing semis
* Use raw event names as top level identifer
* Upgrade baylon
This is required for parsing opaque flow types in our CI tests.
* Clean up flow types
* Revert Map changes of ReactBrowserEventEmitter
* Upgrade babel-* packages
Apparently local unit tests also have issues with parsing JavaScript
modules that contain opaque types (not sure why I didn't notice
earlier!?).
* Revert Map changes of SimpleEventPlugin
* Clean up ReactTestUtils
* Add missing semi
* Fix Flow issue
* Make TopLevelType clearer
* Favor for loops
* Explain the new DOMTopLevelEventTypes concept
* Use static injection for Responder plugin types
* Remove null check and rely on flow checks
* Add missing ResponderEventPlugin dependencies
* Use global state for `hasForceUpdate` instead of persisting to queue
Fixes a bug where `hasForceUpdate` was not reset on commit.
Ideally we'd use a tuple and return `hasForceUpdate` from
`processUpdateQueue`.
* Remove underscore and add comment
* Remove temporary variables
Fixes an oversight from #12600. getDerivedStateFromProps should fire
if either props *or* state have changed, but not if *neither* have
changed. This prevents a parent from re-rendering if a deep child
receives an update.
Previously, _owner would be null if you create an element inside forwardRef or inside a context consumer. This is used by ReactNativeFiberInspector when traversing the hierarchy and also to give more info in some warning texts. This also means you'll now correctly get a warning if you call setState inside one of these.
Test Plan: Tim tried it in the RN inspector.
* makes closure compiler threaded
* Dans PR with a closure compiler java version
* Remove unused dep
* Pin GCC
* Prettier
* Nit rename
* Fix error handling
* Name plugins consistently
* Fix lint
* Maybe this works?
* or this
* AppVeyor
* Fix lint
* Support concurrent primary and secondary renderers.
As a workaround to support multiple concurrent renderers, we categorize
some renderers as primary and others as secondary. We only expect
there to be two concurrent renderers at most: React Native (primary) and
Fabric (secondary); React DOM (primary) and React ART (secondary).
Secondary renderers store their context values on separate fields.
* Add back concurrent renderer warning
Only warn for two concurrent primary or two concurrent secondary renderers.
* Change "_secondary" suffix to "2"
#EveryBitCounts
* Timeout component
Adds Timeout component. If a promise is thrown from inside a Timeout component,
React will suspend the in-progress render from committing. When the promise
resolves, React will retry. If the render is suspended for longer than the
maximum threshold, the Timeout switches to a placeholder state.
The timeout threshold is defined as the minimum of:
- The expiration time of the current render
- The `ms` prop given to each Timeout component in the ancestor path of the
thrown promise.
* Add a test for nested fallbacks
Co-authored-by: Andrew Clark <acdlite@fb.com>
* Resume on promise rejection
React should resume rendering regardless of whether it resolves
or rejects.
* Wrap Suspense code in feature flag
* Children of a Timeout must be strict mode compatible
Async is not required for Suspense, but strict mode is.
* Simplify list of pending work
Some of this was added with "soft expiration" in mind, but now with our revised
model for how soft expiration will work, this isn't necessary.
It would be nice to remove more of this, but I think the list itself is inherent
because we need a way to track the start times, for <Timeout ms={ms} />.
* Only use the Timeout update queue to store promises, not for state
It already worked this way in practice.
* Wrap more Suspense-only paths in the feature flag
* Attach promise listener immediately on suspend
Instead of waiting for commit phase.
* Infer approximate start time using expiration time
* Remove list of pending priority levels
We can replicate almost all the functionality by tracking just five
separate levels: the highest/lowest priority pending levels, the
highest/lowest priority suspended levels, and the lowest pinged level.
We lose a bit of granularity, in that if there are multiple levels of
pending updates, only the first and last ones are known. But in practice
this likely isn't a big deal.
These heuristics are almost entirely isolated to a single module and
can be adjusted later, without API changes, if necessary.
Non-IO-bound work is not affected at all.
* ReactFiberPendingWork -> ReactFiberPendingPriority
* Renaming method names from "pending work" to "pending priority"
* Get rid of SuspenseThenable module
Idk why I thought this was neccessary
* Nits based on Sebastian's feedback
* More naming nits + comments
* Add test for hiding a suspended tree to unblock
* Revert change to expiration time rounding
This means you have to account for the start time approximation
heuristic when writing Suspense tests, but that's going to be
true regardless.
When updating the tests, I also made a fix related to offscreen
priority. We should never timeout inside a hidden tree.
* palceholder -> placeholder
Add a new component type, Profiler, that can be used to collect new render time metrics. Since this is a new, experimental API, it will be exported as React.unstable_Profiler initially.
Most of the functionality for this component has been added behind a feature flag, enableProfileModeMetrics. When the feature flag is disabled, the component will just render its children with no additional behavior. When the flag is enabled, React will also collect timing information and pass it to the onRender function (as described below).
* Support using id to cancel scheduled callback
**what is the change?:**
see title
**why make this change?:**
Once we support multiple callbacks you will need to use the id to
specify which callback you mean.
**test plan:**
Added a test, ran all tests, lint, etc.
* ran prettier
* fix lint
* Use object for storing callback info in scheduler
* Wrap initial test in a describe block
* Support multiple callbacks in `ReactScheduler`
**what is the change?:**
We keep a queue of callbacks instead of just one at a time, and call
them in order first by their timeoutTime and then by the order which
they were scheduled in.
**why make this change?:**
We plan on using this module to coordinate JS outside of React, so we
will need to schedule more than one callback at a time.
**test plan:**
Added a boatload of shiny new tests. :)
Plus ran all the old ones.
NOTE: The tests do not yet cover the vital logic of callbacks timing
out, and later commits will add the missing test coverage.
* Heuristic to avoid looking for timed out callbacks when none timed out
**what is the change?:**
Tracks the current soonest timeOut time for all scheduled callbacks.
**why make this change?:**
We were checking every scheduled callback to see if it timed out on
every tick. It's more efficient to skip that O(n) check if we know that
none have timed out.
**test plan:**
Ran existing tests.
Will write new tests to cover timeout behavior in more detail soon.
* Put multiple callback support under a disabled feature flag
**what is the change?:**
See title
**why make this change?:**
We don't have error handling in place yet, so should maintain the old
behavior until that is in place.
But want to get this far to continue making incremental changes.
**test plan:**
Updated and ran tests.
* Hide support for multiple callbacks under a feature flag
**what is the change?:**
see title
**why make this change?:**
We haven't added error handling yet, so should not expose this feature.
**test plan:**
Ran all tests, temporarily split out the tests for multiple callbacks
into separate file. Will recombine once we remove the flag.
* Fix nits from code review
See comments on https://github.com/facebook/react/pull/12743
* update checklist in comments
* Remove nested loop which calls additional timed out callbacks
**what is the change?:**
We used to re-run any callbacks which time out whilst other callbacks
are running, but now we will only check once for timed out callbacks
then then run them.
**why make this change?:**
To simplify the code and the behavior of this module.
**test plan:**
Ran all existing tests.
* Remove feature flag
**what is the change?:**
see title
**why make this change?:**
Because only React is using this, and it sounds like async. rendering
won't hit any different behavior due to these changes.
**test plan:**
Existing tests pass, and this allowed us to recombine all tests to run
in both 'test' and 'test-build' modes.
* remove outdated file
* fix typo
* Mark new component types with PerformedWork effect
* Don't do it for ForwardRef
Since this has some overhead and ForwardRef is likely going to be used around context, let's skip it.
We don't highlight ForwardRef alone in DevTools anyway.
```
$ jest
FAIL scripts/jest/dont-run-jest-directly.js
● Test suite failed to run
Don't run `jest` directly. Run `yarn test` instead.
> 1 | throw new Error("Don't run `jest` directly. Run `yarn test` instead.");
2 |
at Object.<anonymous> (scripts/jest/dont-run-jest-directly.js:1:96)
Test Suites: 1 failed, 1 total
Tests: 0 total
Snapshots: 0 total
Time: 0.866s
Ran all test suites.
```
* Add a failing test for forwardRef memoization
* Memoize forwardRef props and bail out on strict equality
* Bail out only when ref matches the current ref
**what is the change?:**
We had a condition to set either 'performance.now' or 'Date.now' as the
'now' function.
Then later we had another conditional checking again if
'performance.now' was supported, and using it if so, otherwise falling
back to 'Date.now'.
More efficient to just use the 'now' shortcut defined above.
**why make this change?:**
Fewer lines, clearer code.
**test plan:**
Now that we have tests we can run them :)
* Remove the 'alwaysUseRequestIdleCallbackPolyfill' feature flag
**what is the change?:**
Removes the feature flag 'alwaysUseRequestIdleCallbackPolyfill', such
that we **always** use the polyfill for requestIdleCallback.
**why make this change?:**
We have been testing this feature flag at 100% for some time internally,
and determined it works better for React than the native implementation.
Looks like RN was overriding the flag to use the native when possible,
but since no RN products are using 'async' mode it should be safe to
switch this flag over for RN as well.
**test plan:**
We have already been testing this internally for some time.
**issue:**
internal task t28128480
* fix mistaken conditional
* Add mocking of rAF, postMessage, and initial test for ReactScheduler
**what is the change?:**
- In all tests where we previously mocked rIC or relied on native
mocking which no longer works, we are now mocking rAF and postMessage.
- Also adds a basic initial test for ReactScheduler.
NOTE -> we do plan to write headless browser tests for ReactScheduler!
This is just an initial test, to verify that it works with the mocked
out browser APIs as expected.
**why make this change?:**
We need to mock out the browser APIs more completely for the new
'ReactScheduler' to work in our tests. Many tests are depending on it,
since it's used at a low level.
By mocking the browser APIs rather than the 'react-scheduler' module, we
enable testing the production bundles. This approach is trading
isolation for accuracy. These tests will be closer to a real use.
**test plan:**
run the tests :)
**issue:**
internal task T28128480
* Decouple update queue from Fiber type
The update queue is in need of a refactor. Recent bugfixes (#12528) have
exposed some flaws in how it's modeled. Upcoming features like Suspense
and [redacted] also rely on the update queue in ways that weren't
anticipated in the original design.
Major changes:
- Instead of boolean flags for `isReplace` and `isForceUpdate`, updates
have a `tag` field (like Fiber). This lowers the cost for adding new
types of updates.
- Render phase updates are special cased. Updates scheduled during
the render phase are dropped if the work-in-progress does not commit.
This is used for `getDerivedStateFrom{Props,Catch}`.
- `callbackList` has been replaced with a generic effect list. Aside
from callbacks, this is also used for `componentDidCatch`.
* Remove first class UpdateQueue types and use closures instead
I tried to avoid this at first, since we avoid it everywhere else in the Fiber
codebase, but since updates are not in a hot path, the trade off with file size
seems worth it.
* Store captured errors on a separate part of the update queue
This way they can be reused independently of updates like
getDerivedStateFromProps. This will be important for resuming.
* Revert back to storing hasForceUpdate on the update queue
Instead of using the effect tag. Ideally, this would be part of the
return type of processUpdateQueue.
* Rename UpdateQueue effect type back to Callback
I don't love this name either, but it's less confusing than UpdateQueue
I suppose. Conceptually, this is usually a callback: setState callbacks,
componentDidCatch. The only case that feels a bit weird is Timeouts,
which use this effect to attach a promise listener. I guess that kinda
fits, too.
* Call getDerivedStateFromProps every render, even if props did not change
Rather than enqueue a new setState updater for every props change, we
can skip the update queue entirely and merge the result into state at
the end. This makes more sense, since "receiving props" is not an event
that should be observed. It's still a bit weird, since eventually we do
persist the derived state (in other words, it accumulates).
* Store captured effects on separate list from "own" effects (callbacks)
For resuming, we need the ability to discard the "own" effects while
reusing the captured effects.
* Optimize for class components
Change `process` and `callback` to match the expected payload types
for class components. I had intended for the update queue to be reusable
for both class components and a future React API, but we'll likely have
to fork anyway.
* Only double-invoke render phase lifecycles functions in DEV
* Use global state to track currently processing queue in DEV
* checkPropTypes in updateContextProvider
* invalid “prop”
* `type not `types` .. :l
* test
* don’t need extra check with no spelling mistake (:
* change error message to specifically address provider
* don’t need class, add extra render to make sure good props go through
* nitpicky rename
* prettier
* switch to `Context.Provider`
* add stack to warning, add extra undefined check
* separate dev check
* add stack to test
* more efficient
* remove unused function
* prettier
* const to top
This is the first step - pulling the ReactDOMFrameScheduling module out
into a separate package.
Co-authored-by: Brandon Dail <aweary@users.noreply.github.com>
* Installed 3.x release of react-lifecycles-compat
* Updated ReactComponentLifeCycle-test and ReactDOMServerLifecycles-test to cover both polyfilled lifecycles in StrictMode
* Updated StrictMode warnings to not warn about polyfilled getSnapshotBeforeUpdate
* Added new "native-fb" and "native-fabric-fb" bundles.
* Split RN_DEV and RN_PROD bundle types into RN_OSS_DEV, RN_OSS_PROD, RN_FB_DEV, and RN_FB_PROD. (This is a bit redundant but it seemed the least intrusive way of supporting a forked feature flags file for these bundles.)
* Renamed FB_DEV and FB_PROD bundle types to be more explicitly for www (FB_WWW_DEV and FB_WWW_PROD)
* Removed Haste @providesModule headers from the RB-specific RN renderer bundles to avoid a duplicate name conflicts.
* Remove dynamic values from OSS RN feature flags. (Leave them in FB RN feature flags.)
* Updated the sync script(s) to account for new renderer type.
* Move ReactFeatureFlags.js shim to FB bundle only (since OSS bundle no longer needs dynamic values).
* Added new debug performance tests for AsyncMode, StrictMode, forwardRef, and context provider/consumer components.
* Updated performance labels to exclude AsyncMode and StrictMode.
* Added labels for forwardRef (and inner function) that mirror DevTools labels.
* Don't download bundle stats from master on CI
This was temporarily necessary in the past because we didn't have the logic that downloads actual *merge base* stats.
We do have that now as part of the Danger script. So we can remove this.
* Use absolute threshold for whether to show a change
* Download master stats, but only for other master builds
* Rewrite sizes
* Bump expiration for interactive updates to 150ms in production
**what is the change?:**
Changes the expiration deadline from 500ms to 150ms, only in production.
In development it will still be 500ms.
I'm thinking we may want to change the 'bucket size' too, will look into
that a bit.
**why make this change?:**
We need to ensure interactions are responsive enough in order to gather
more test data on async. mode.
**test plan:**
No tests failed - where shall we add a test for this?
* Add comments
* Move findNodeHandle into the renderers and use instantiation
This is just like ReactDOM does it. This also lets us get rid of injection
for findNodeHandle. Instead I move NativeMethodsMixin and ReactNativeComponent
to use instantiation.
* Refactor findHostInstance
The reconciler shouldn't expose the Fiber data structure. We should pass
the component instance to the reconciler, since the reconciler is the
thing that is supposed to be instancemap aware.
* Fix devtools injection
* Move view config registry to shims
This ensures that both Fabric and RN renderers share the same view config
registry since it is stateful.
I had to duplicate in the mocks for testing.
* Move createReactNativeComponentClass to shims and delete internal usage
Since createReactNativeComponentClass is just an alias for the register
there's no need to bundle it. This file should probably just move back
to RN too.
We already have one stateful module that contains all the view config.
We might as well store the event types there too. That way the shared
state is compartmentalized (and I can move it out in a follow up PR).
The view config registry also already has an appropriate place to call
processEventTypes so now we no longer have to do it in RN.
Will follow up with a PR to RN to remove that call.
These don't make much sense in Fabric, since Fabric will be async by default only.
And unmount+remove container is a sketchy API we should remove so we might
as well make sure modern containers enforce that.
This doesn't actually need to share any state because it goes through
the instance to the fiber structure. Since Fabric is on the same version
as RN, calling it on either renderer works.
There are no plans to enable async in the old renderer. In the new renderer
it only really makes sense to do from the main thread and probably from
native since it'll have to yield to native first.
This is not safe in general and therefore shouldn't be exposed to anything
other than React Native internals.
It will also need a different version in Fabric that will not have the
reactTag exposed.
* Don't render consumers that bailed out with bitmask even if there's a deeper matching child
* Use a render prop in the test
Without it, <Indirection> doesn't do anything because we bail out on constant element anyway.
That's not what we're testing, and could be confusing.
Based on a bug found in UFI2.
There have been several bugs related to the update queue (and
specifically baseState) recently, so I'm going to follow-up with some
refactoring to clean it up. This is a quick fix so we can ship a
patch release.
* Add regression tests for error boundary replay bugs
* Ensure the context stack is aligned if renderer throws
* Always throw when replaying a failed unit of work
Replaying a failed unit of work should always throw, because the render
phase is meant to be idempotent, If it doesn't throw, rethrow the
original error, so React's internal stack is not misaligned.
* Reset originalReplayError after replaying
* Typo fix
* Update user timing to record when we are about to commit
**what is the change?:**
After repeatedly logging '(React Tree Reconciliation)' we vary the
message slightly for the last reconciliation, which happens right before
we commit.
**why make this change?:**
When debugging performance in the devtools it will be helpful if we can
quickly see where the 'commit' happens in a potentially long list of
sliced '(React Tree Reconciliation)' logs.
**test plan:**
Built and ran one of the fixtures. Also ran the unit test.
(Flarnie will insert a screenshot)
* Ran prettier
* Fixes in response to code review
* Update snapshot tests
* Move isWorking assignment out of branches to top
* Stricter type for stopWorkLoopTimer args
* Fix DEV performance regression by avoiding Object.assign on Fibers
* Reduce allocations in hot path by reusing the stash
Since performUnitOfWork() is not reentrant, it should be safe to reuse the same stash every time instead of creating a new object.
* Fix a false positive warning in IE11 when using `React.Fragment`. ([@XaveScor](https://github.com/XaveScor) in [#11823](https://github.com/facebook/react/pull/11823))
## 16.5.2 (September 18, 2018)
### React DOM
* Fixed a recent `<iframe>` regression ([@JSteunou](https://github.com/JSteunou) in [#13650](https://github.com/facebook/react/pull/13650))
* Fix `updateWrapper` so that `<textarea>`s no longer re-render when data is unchanged ([@joelbarbosa](https://github.com/joelbarbosa) in [#13643](https://github.com/facebook/react/pull/13643))
### Schedule (Experimental)
* Renaming "tracking" API to "tracing" ([@bvaughn](https://github.com/bvaughn) in [#13641](https://github.com/facebook/react/pull/13641))
* Add UMD production+profiling entry points ([@bvaughn](https://github.com/bvaughn) in [#13642](https://github.com/facebook/react/pull/13642))
* Refactored `schedule` to remove some React-isms and improve performance for when deferred updates time out ([@acdlite](https://github.com/acdlite) in [#13582](https://github.com/facebook/react/pull/13582))
## 16.5.1 (September 13, 2018)
### React
* Improve the warning when `React.forwardRef` receives an unexpected number of arguments. ([@andresroberto](https://github.com/andresroberto) in [#13636](https://github.com/facebook/react/issues/13636))
### React DOM
* Fix a regression in unstable exports used by React Native Web. ([@aweary](https://github.com/aweary) in [#13598](https://github.com/facebook/react/issues/13598))
* Fix a crash when component defines a method called `isReactComponent`. ([@gaearon](https://github.com/gaearon) in [#13608](https://github.com/facebook/react/issues/13608))
* Fix a crash in development mode in IE9 when printing a warning. ([@link-alex](https://github.com/link-alex) in [#13620](https://github.com/facebook/react/issues/13620))
* Provide a better error message when running `react-dom/profiling` with `schedule/tracking`. ([@bvaughn](https://github.com/bvaughn) in [#13605](https://github.com/facebook/react/issues/13605))
* If a `ForwardRef` component defines a `displayName`, use it in warnings. ([@probablyup](https://github.com/probablyup) in [#13615](https://github.com/facebook/react/issues/13615))
### Schedule (Experimental)
* Add a separate profiling entry point at `schedule/tracking-profiling`. ([@bvaughn](https://github.com/bvaughn) in [#13605](https://github.com/facebook/react/issues/13605))
## 16.5.0 (September 5, 2018)
### React
* Add a warning if `React.forwardRef` render function doesn't take exactly two arguments ([@bvaughn](https://github.com/bvaughn) in [#13168](https://github.com/facebook/react/issues/13168))
* Improve the error message when passing an element to `createElement` by mistake ([@DCtheTall](https://github.com/DCtheTall) in [#13131](https://github.com/facebook/react/issues/13131))
* Don't call profiler `onRender` until after mutations ([@bvaughn](https://github.com/bvaughn) in [#13572](https://github.com/facebook/react/issues/13572))
### React DOM
* Add support for React DevTools Profiler ([@bvaughn](https://github.com/bvaughn) in [#13058](https://github.com/facebook/react/issues/13058))
* Add `react-dom/profiling` entry point alias for profiling in production ([@bvaughn](https://github.com/bvaughn) in [#13570](https://github.com/facebook/react/issues/13570))
* Add `onAuxClick` event for browsers that support it ([@jquense](https://github.com/jquense) in [#11571](https://github.com/facebook/react/issues/11571))
* Add `movementX` and `movementY` fields to mouse events ([@jasonwilliams](https://github.com/jasonwilliams) in [#9018](https://github.com/facebook/react/issues/9018))
* Add `tangentialPressure` and `twist` fields to pointer events ([@motiz88](https://github.com/motiz88) in [#13374](https://github.com/facebook/react/issues/13374))
* Minimally support iframes (nested browsing contexts) in selection event handling ([@acusti](https://github.com/acusti) in [#12037](https://github.com/facebook/react/issues/12037))
* Support passing booleans to the `focusable` SVG attribute ([@gaearon](https://github.com/gaearon) in [#13339](https://github.com/facebook/react/issues/13339))
* Ignore `<noscript>` on the client when hydrating ([@Ephem](https://github.com/Ephem) in [#13537](https://github.com/facebook/react/issues/13537))
* Fix `gridArea` to be treated as a unitless CSS property ([@mgol](https://github.com/mgol) in [#13550](https://github.com/facebook/react/issues/13550))
* Fix incorrect data in `compositionend` event when typing Korean on IE11 ([@crux153](https://github.com/crux153) in [#12563](https://github.com/facebook/react/issues/12563))
* Fix a crash when using dynamic `children` in the `<option>` tag ([@Slowyn](https://github.com/Slowyn) in [#13261](https://github.com/facebook/react/issues/13261), [@gaearon](https://github.com/gaearon) in [#13465](https://github.com/facebook/react/pull/13465))
* Fix the `checked` attribute not getting initially set on the `input` ([@dilidili](https://github.com/dilidili) in [#13114](https://github.com/facebook/react/issues/13114))
* Fix hydration of `dangerouslySetInnerHTML` when `__html` is not a string ([@gaearon](https://github.com/gaearon) in [#13353](https://github.com/facebook/react/issues/13353))
* Fix a warning about missing controlled `onChange` to fire on falsy values too ([@nicolevy](https://github.com/nicolevy) in [#12628](https://github.com/facebook/react/issues/12628))
* Fix `submit` and `reset` buttons getting an empty label ([@ellsclytn](https://github.com/ellsclytn) in [#12780](https://github.com/facebook/react/issues/12780))
* Fix the `onSelect` event not being triggered after drag and drop ([@gaearon](https://github.com/gaearon) in [#13422](https://github.com/facebook/react/issues/13422))
* Fix the `onClick` event not working inside a portal on iOS ([@aweary](https://github.com/aweary) in [#11927](https://github.com/facebook/react/issues/11927))
* Fix a performance issue when thousands of roots are re-rendered ([@gaearon](https://github.com/gaearon) in [#13335](https://github.com/facebook/react/issues/13335))
* Fix a performance regression that also caused `onChange` to not fire in some cases ([@gaearon](https://github.com/gaearon) in [#13423](https://github.com/facebook/react/issues/13423))
* Handle errors in more edge cases gracefully ([@gaearon](https://github.com/gaearon) in [#13237](https://github.com/facebook/react/issues/13237) and [@acdlite](https://github.com/acdlite) in [#13269](https://github.com/facebook/react/issues/13269))
* Don't use proxies for synthetic events in development ([@gaearon](https://github.com/gaearon) in [#12171](https://github.com/facebook/react/issues/12171))
* Warn when `"false"` or `"true"` is the value of a boolean DOM prop ([@motiz88](https://github.com/motiz88) in [#13372](https://github.com/facebook/react/issues/13372))
* Warn when `this.state` is initialized to `props` ([@veekas](https://github.com/veekas) in [#11658](https://github.com/facebook/react/issues/11658))
* Don't compare `style` on hydration in IE due to noisy false positives ([@mgol](https://github.com/mgol) in [#13534](https://github.com/facebook/react/issues/13534))
* Include `StrictMode` in the component stack ([@gaearon](https://github.com/gaearon) in [#13240](https://github.com/facebook/react/issues/13240))
* Don't overwrite `window.event` in IE ([@ConradIrwin](https://github.com/ConradIrwin) in [#11696](https://github.com/facebook/react/issues/11696))
* Improve component stack for the `folder/index.js` naming convention ([@gaearon](https://github.com/gaearon) in [#12059](https://github.com/facebook/react/issues/12059))
* Improve a warning when using `getDerivedStateFromProps` without initialized state ([@flxwu](https://github.com/flxwu) in [#13317](https://github.com/facebook/react/issues/13317))
* Improve a warning about invalid textarea usage ([@raunofreiberg](https://github.com/raunofreiberg) in [#13361](https://github.com/facebook/react/issues/13361))
* Treat invalid Symbol and function values more consistently ([@raunofreiberg](https://github.com/raunofreiberg) in [#13362](https://github.com/facebook/react/issues/13362) and [#13389](https://github.com/facebook/react/issues/13389))
* Allow Electron `<webview>` tag without warnings ([@philipp-spiess](https://github.com/philipp-spiess) in [#13301](https://github.com/facebook/react/issues/13301))
* Don't show the uncaught error addendum if `e.preventDefault()` was called ([@gaearon](https://github.com/gaearon) in [#13384](https://github.com/facebook/react/issues/13384))
* Warn about rendering Generators ([@gaearon](https://github.com/gaearon) in [#13312](https://github.com/facebook/react/issues/13312))
* Remove irrelevant suggestion of a legacy method from a warning ([@zx6658](https://github.com/zx6658) in [#13169](https://github.com/facebook/react/issues/13169))
* Remove `unstable_deferredUpdates` in favor of `unstable_scheduleWork` from `schedule` ([@gaearon](https://github.com/gaearon) in [#13488](https://github.com/facebook/react/issues/13488))
* Fix unstable asynchronous mode from doing unnecessary work when an update takes too long ([@acdlite](https://github.com/acdlite) in [#13503](https://github.com/facebook/react/issues/13503))
### React DOM Server
* Fix crash with nullish children when using `dangerouslySetInnerHtml` in a selected `<option>` ([@mridgway](https://github.com/mridgway) in [#13078](https://github.com/facebook/react/issues/13078))
* Fix crash when `setTimeout` is missing ([@dustinsoftware](https://github.com/dustinsoftware) in [#13088](https://github.com/facebook/react/issues/13088))
### React Test Renderer and Test Utils
* Fix `this` in a functional component for shallow renderer to be `undefined` ([@koba04](https://github.com/koba04) in [#13144](https://github.com/facebook/react/issues/13144))
* Deprecate a Jest-specific `ReactTestUtils.mockComponent()` helper ([@bvaughn](https://github.com/bvaughn) in [#13193](https://github.com/facebook/react/issues/13193))
* Warn about `ReactDOM.createPortal` usage within the test renderer ([@bvaughn](https://github.com/bvaughn) in [#12895](https://github.com/facebook/react/issues/12895))
* Improve a confusing error message ([@gaearon](https://github.com/gaearon) in [#13351](https://github.com/facebook/react/issues/13351))
### React ART
* Add support for DevTools ([@yunchancho](https://github.com/yunchancho) in [#13173](https://github.com/facebook/react/issues/13173))
### Schedule (Experimental)
* New package for cooperatively scheduling work in a browser environment. It's used by React internally, but its public API is not finalized yet. ([@flarnie](https://github.com/flarnie) in [#12624](https://github.com/facebook/react/pull/12624))
## 16.4.2 (August 1, 2018)
### React DOM Server
* Fix a [potential XSS vulnerability when the attacker controls an attribute name](https://reactjs.org/blog/2018/08/01/react-v-16-4-2.html) (`CVE-2018-6341`). This fix is available in the latest `react-dom@16.4.2`, as well as in previous affected minor versions: `react-dom@16.0.1`, `react-dom@16.1.2`, `react-dom@16.2.1`, and `react-dom@16.3.3`. ([@gaearon](https://github.com/gaearon) in [#13302](https://github.com/facebook/react/pull/13302))
* Fix a crash in the server renderer when an attribute is called `hasOwnProperty`. This fix is only available in `react-dom@16.4.2`. ([@gaearon](https://github.com/gaearon) in [#13303](https://github.com/facebook/react/pull/13303))
## 16.4.1 (June 13, 2018)
### React
* You can now assign `propTypes` to components returned by `React.ForwardRef`. ([@bvaughn](https://github.com/bvaughn) in [#12911](https://github.com/facebook/react/pull/12911))
### React DOM
* Fix a crash when the input `type` changes from some other types to `text`. ([@spirosikmd](https://github.com/spirosikmd) in [#12135](https://github.com/facebook/react/pull/12135))
* Fix a crash in IE11 when restoring focus to an SVG element. ([@ThaddeusJiang](https://github.com/ThaddeusJiang) in [#12996](https://github.com/facebook/react/pull/12996))
* Fix a range input not updating in some cases. ([@Illu](https://github.com/Illu) in [#12939](https://github.com/facebook/react/pull/12939))
* Fix input validation triggering unnecessarily in Firefox. ([@nhunzaker](https://github.com/nhunzaker) in [#12925](https://github.com/facebook/react/pull/12925))
* Fix an incorrect `event.target` value for the `onChange` event in IE9. ([@nhunzaker](https://github.com/nhunzaker) in [#12976](https://github.com/facebook/react/pull/12976))
* Fix a false positive error when returning an empty `<React.Fragment />` from a component. ([@philipp-spiess](https://github.com/philipp-spiess) in [#12966](https://github.com/facebook/react/pull/12966))
### React DOM Server
* Fix an incorrect value being provided by new context API. ([@ericsoderberghp](https://github.com/ericsoderberghp) in [#12985](https://github.com/facebook/react/pull/12985), [@gaearon](https://github.com/gaearon) in [#13019](https://github.com/facebook/react/pull/13019))
### React Test Renderer
* Allow multiple root children in test renderer traversal API. ([@gaearon](https://github.com/gaearon) in [#13017](https://github.com/facebook/react/pull/13017))
* Fix `getDerivedStateFromProps()` in the shallow renderer to not discard the pending state. ([@fatfisz](https://github.com/fatfisz) in [#13030](https://github.com/facebook/react/pull/13030))
## 16.4.0 (May 23, 2018)
### React
* Add a new [experimental](https://github.com/reactjs/rfcs/pull/51) `React.unstable_Profiler` component for measuring performance. ([@bvaughn](https://github.com/bvaughn) in [#12745](https://github.com/facebook/react/pull/12745))
### React DOM
* Add support for the Pointer Events specification. ([@philipp-spiess](https://github.com/philipp-spiess) in [#12507](https://github.com/facebook/react/pull/12507))
* Properly call `getDerivedStateFromProps()` regardless of the reason for re-rendering. ([@acdlite](https://github.com/acdlite) in [#12600](https://github.com/facebook/react/pull/12600) and [#12802](https://github.com/facebook/react/pull/12802))
* Fix a bug that prevented context propagation in some cases. ([@gaearon](https://github.com/gaearon) in [#12708](https://github.com/facebook/react/pull/12708))
* Fix re-rendering of components using `forwardRef()` on a deeper `setState()`. ([@gaearon](https://github.com/gaearon) in [#12690](https://github.com/facebook/react/pull/12690))
* Fix some attributes incorrectly getting removed from custom element nodes. ([@airamrguez](https://github.com/airamrguez) in [#12702](https://github.com/facebook/react/pull/12702))
* Fix context providers to not bail out on children if there's a legacy context provider above. ([@gaearon](https://github.com/gaearon) in [#12586](https://github.com/facebook/react/pull/12586))
* Add the ability to specify `propTypes` on a context provider component. ([@nicolevy](https://github.com/nicolevy) in [#12658](https://github.com/facebook/react/pull/12658))
* Fix a false positive warning when using `react-lifecycles-compat` in `<StrictMode>`. ([@bvaughn](https://github.com/bvaughn) in [#12644](https://github.com/facebook/react/pull/12644))
* Warn when the `forwardRef()` render function has `propTypes` or `defaultProps`. ([@bvaughn](https://github.com/bvaughn) in [#12644](https://github.com/facebook/react/pull/12644))
* Improve how `forwardRef()` and context consumers are displayed in the component stack. ([@sophiebits](https://github.com/sophiebits) in [#12777](https://github.com/facebook/react/pull/12777))
* Change internal event names. This can break third-party packages that rely on React internals in unsupported ways. ([@philipp-spiess](https://github.com/philipp-spiess) in [#12629](https://github.com/facebook/react/pull/12629))
### React Test Renderer
* Fix the `getDerivedStateFromProps()` support to match the new React DOM behavior. ([@koba04](https://github.com/koba04) in [#12676](https://github.com/facebook/react/pull/12676))
* Fix a `testInstance.parent` crash when the parent is a fragment or another special node. ([@gaearon](https://github.com/gaearon) in [#12813](https://github.com/facebook/react/pull/12813))
*`forwardRef()` components are now discoverable by the test renderer traversal methods. ([@gaearon](https://github.com/gaearon) in [#12725](https://github.com/facebook/react/pull/12725))
* Shallow renderer now ignores `setState()` updaters that return `null` or `undefined`. ([@koba04](https://github.com/koba04) in [#12756](https://github.com/facebook/react/pull/12756))
### React ART
* Fix reading context provided from the tree managed by React DOM. ([@acdlite](https://github.com/acdlite) in [#12779](https://github.com/facebook/react/pull/12779))
### React Call Return (Experimental)
* This experiment was deleted because it was affecting the bundle size and the API wasn't good enough. It's likely to come back in the future in some other form. ([@gaearon](https://github.com/gaearon) in [#12820](https://github.com/facebook/react/pull/12820))
### React Reconciler (Experimental)
* The [new host config shape](https://github.com/facebook/react/blob/c601f7a64640290af85c9f0e33c78480656b46bc/packages/react-noop-renderer/src/createReactNoop.js#L82-L285) is flat and doesn't use nested objects. ([@gaearon](https://github.com/gaearon) in [#12792](https://github.com/facebook/react/pull/12792))
## 16.3.3 (August 1, 2018)
### React DOM Server
* Fix a [potential XSS vulnerability when the attacker controls an attribute name](https://reactjs.org/blog/2018/08/01/react-v-16-4-2.html) (`CVE-2018-6341`). This fix is available in the latest `react-dom@16.4.2`, as well as in previous affected minor versions: `react-dom@16.0.1`, `react-dom@16.1.2`, `react-dom@16.2.1`, and `react-dom@16.3.3`. ([@gaearon](https://github.com/gaearon) in [#13302](https://github.com/facebook/react/pull/13302))
## 16.3.2 (April 16, 2018)
### React
* Improve the error message when passing `null` or `undefined` to `React.cloneElement`. ([@nicolevy](https://github.com/nicolevy) in [#12534](https://github.com/facebook/react/pull/12534))
### React DOM
* Fix an IE crash in development when using `<StrictMode>`. ([@bvaughn](https://github.com/bvaughn) in [#12546](https://github.com/facebook/react/pull/12546))
* Fix labels in User Timing measurements for new component types. ([@bvaughn](https://github.com/bvaughn) in [#12609](https://github.com/facebook/react/pull/12609))
* Improve the warning about wrong component type casing. ([@nicolevy](https://github.com/nicolevy) in [#12533](https://github.com/facebook/react/pull/12533))
* Improve general performance in development mode. ([@gaearon](https://github.com/gaearon) in [#12537](https://github.com/facebook/react/pull/12537))
* Improve performance of the experimental `unstable_observedBits` API with nesting. ([@gaearon](https://github.com/gaearon) in [#12543](https://github.com/facebook/react/pull/12543))
### React Test Renderer
* Add a UMD build. ([@bvaughn](https://github.com/bvaughn) in [#12594](https://github.com/facebook/react/pull/12594))
## 16.3.1 (April 3, 2018)
### React
* Fix a false positive warning in IE11 when using `Fragment`. ([@heikkilamarko](https://github.com/heikkilamarko) in [#12504](https://github.com/facebook/react/pull/12504))
* Prefix a private API. ([@Andarist](https://github.com/Andarist) in [#12501](https://github.com/facebook/react/pull/12501))
* Improve the warning when calling `setState()` in constructor. ([@gaearon](https://github.com/gaearon) in [#12532](https://github.com/facebook/react/pull/12532))
### React DOM
* Fix `getDerivedStateFromProps()` not getting applied in some cases. ([@acdlite](https://github.com/acdlite) in [#12528](https://github.com/facebook/react/pull/12528))
* Fix a performance regression in development mode. ([@gaearon](https://github.com/gaearon) in [#12510](https://github.com/facebook/react/pull/12510))
* Fix error handling bugs in development mode. ([@gaearon](https://github.com/gaearon) and [@acdlite](https://github.com/acdlite) in [#12508](https://github.com/facebook/react/pull/12508))
* Improve user timing API messages for profiling. ([@flarnie](https://github.com/flarnie) in [#12384](https://github.com/facebook/react/pull/12384))
### Create Subscription
* Set the package version to be in sync with React releases. ([@bvaughn](https://github.com/bvaughn) in [#12526](https://github.com/facebook/react/pull/12526))
* Add a peer dependency on React 16.3+. ([@NMinhNguyen](https://github.com/NMinhNguyen) in [#12496](https://github.com/facebook/react/pull/12496))
## 16.3.0 (March 29, 2018)
### React
* Add a new officially supported context API. ([@acdlite](https://github.com/acdlite) in [#11818](https://github.com/facebook/react/pull/11818))
* Add a new `React.createRef()` API as an ergonomic alternative to callback refs. ([@trueadm](https://github.com/trueadm) in [#12162](https://github.com/facebook/react/pull/12162))
* Add a new `React.forwardRef()` API to let components forward their refs to a child. ([@bvaughn](https://github.com/bvaughn) in [#12346](https://github.com/facebook/react/pull/12346))
* Fix a false positive warning in IE11 when using `React.Fragment`. ([@XaveScor](https://github.com/XaveScor) in [#11823](https://github.com/facebook/react/pull/11823))
* Replace `React.unstable_AsyncComponent` with `React.unstable_AsyncMode`. ([@acdlite](https://github.com/acdlite) in [#12117](https://github.com/facebook/react/pull/12117))
* Improve the error message when calling `setState()` on an unmounted component. ([@sophiebits](https://github.com/sophiebits) in [#12347](https://github.com/facebook/react/pull/12347))
### React DOM
* Add a new `getDerivedStateFromProps()` lifecycle and `UNSAFE_` aliases for the legacy lifecycles. ([@bvaughn](https://github.com/bvaughn) in [#12028](https://github.com/facebook/react/pull/12028))
* Add a new `getSnapshotBeforeUpdate()` lifecycle. ([@bvaughn](https://github.com/bvaughn) in [#12404](https://github.com/facebook/react/pull/12404))
* Add a new `<React.StrictMode>` wrapper to help prepare apps for async rendering. ([@bvaughn](https://github.com/bvaughn) in [#12083](https://github.com/facebook/react/pull/12083))
* Add support for `onLoad` and `onError` events on the `<link>` tag. ([@roderickhsiao](https://github.com/roderickhsiao) in [#11825](https://github.com/facebook/react/pull/11825))
* Add support for `noModule` boolean attribute on the `<script>` tag. ([@aweary](https://github.com/aweary) in [#11900](https://github.com/facebook/react/pull/11900))
* Fix minor DOM input bugs in IE and Safari. ([@nhunzaker](https://github.com/nhunzaker) in [#11534](https://github.com/facebook/react/pull/11534))
* Correctly detect Ctrl + Enter in `onKeyPress` in more browsers. ([@nstraub](https://github.com/nstraub) in [#10514](https://github.com/facebook/react/pull/10514))
* Fix containing elements getting focused on SSR markup mismatch. ([@koba04](https://github.com/koba04) in [#11737](https://github.com/facebook/react/pull/11737))
* Fix `value` and `defaultValue` to ignore Symbol values. ([@nhunzaker](https://github.com/nhunzaker) in [#11741](https://github.com/facebook/react/pull/11741))
* Fix refs to class components not getting cleaned up when the attribute is removed. ([@bvaughn](https://github.com/bvaughn) in [#12178](https://github.com/facebook/react/pull/12178))
* Fix an IE/Edge issue when rendering inputs into a different window. ([@M-ZubairAhmed](https://github.com/M-ZubairAhmed) in [#11870](https://github.com/facebook/react/pull/11870))
* Throw with a meaningful message if the component runs after jsdom has been destroyed. ([@gaearon](https://github.com/gaearon) in [#11677](https://github.com/facebook/react/pull/11677))
* Don't crash if there is a global variable called `opera` with a `null` value. [@alisherdavronov](https://github.com/alisherdavronov) in [#11854](https://github.com/facebook/react/pull/11854))
* Don't check for old versions of Opera. ([@skiritsis](https://github.com/skiritsis) in [#11921](https://github.com/facebook/react/pull/11921))
* Deduplicate warning messages about `<option selected>`. ([@watadarkstar](https://github.com/watadarkstar) in [#11821](https://github.com/facebook/react/pull/11821))
* Deduplicate warning messages about invalid callback. ([@yenshih](https://github.com/yenshih) in [#11833](https://github.com/facebook/react/pull/11833))
* Deprecate `ReactDOM.unstable_createPortal()` in favor of `ReactDOM.createPortal()`. ([@prometheansacrifice](https://github.com/prometheansacrifice) in [#11747](https://github.com/facebook/react/pull/11747))
* Don't emit User Timing entries for context types. ([@abhaynikam](https://github.com/abhaynikam) in [#12250](https://github.com/facebook/react/pull/12250))
* Improve the error message when context consumer child isn't a function. ([@raunofreiberg](https://github.com/raunofreiberg) in [#12267](https://github.com/facebook/react/pull/12267))
* Improve the error message when adding a ref to a functional component. ([@skiritsis](https://github.com/skiritsis) in [#11782](https://github.com/facebook/react/pull/11782))
### React DOM Server
* Prevent an infinite loop when attempting to render portals with SSR. ([@gaearon](https://github.com/gaearon) in [#11709](https://github.com/facebook/react/pull/11709))
* Warn if a class doesn't extend `React.Component`. ([@wyze](https://github.com/wyze) in [#11993](https://github.com/facebook/react/pull/11993))
* Fix an issue with `this.state` of different components getting mixed up. ([@sophiebits](https://github.com/sophiebits) in [#12323](https://github.com/facebook/react/pull/12323))
* Provide a better message when component type is undefined. ([@HeroProtagonist](https://github.com/HeroProtagonist) in [#11966](https://github.com/facebook/react/pull/11966))
</details>
## React Test Renderer
* Fix handling of fragments in `toTree()`. ([@maciej-ka](https://github.com/maciej-ka) in [#12107](https://github.com/facebook/react/pull/12107) and [@gaearon](https://github.com/gaearon) in [#12154](https://github.com/facebook/react/pull/12154))
* Shallow renderer should assign state to `null` for components that don't set it. ([@jwbay](https://github.com/jwbay) in [#11965](https://github.com/facebook/react/pull/11965))
* Shallow renderer should filter legacy context according to `contextTypes`. ([@koba04](https://github.com/koba04) in [#11922](https://github.com/facebook/react/pull/11922))
* Add an unstable API for testing asynchronous rendering. ([@acdlite](https://github.com/acdlite) in [#12478](https://github.com/facebook/react/pull/12478))
### React Is (New)
* First release of the [new package](https://github.com/facebook/react/tree/master/packages/react-is) that libraries can use to detect different React node types. ([@bvaughn](https://github.com/bvaughn) in [#12199](https://github.com/facebook/react/pull/12199))
* Add `ReactIs.isValidElementType()` to help higher-order components validate their inputs. ([@jamesreggio](https://github.com/jamesreggio) in [#12483](https://github.com/facebook/react/pull/12483))
### React Lifecycles Compat (New)
* First release of the [new package](https://github.com/reactjs/react-lifecycles-compat) to help library developers target multiple versions of React. ([@bvaughn](https://github.com/bvaughn) in [#12105](https://github.com/facebook/react/pull/12105))
### Create Subscription (New)
* First release of the [new package](https://github.com/facebook/react/tree/master/packages/create-subscription) to subscribe to external data sources safely for async rendering. ([@bvaughn](https://github.com/bvaughn) in [#12325](https://github.com/facebook/react/pull/12325))
### React Reconciler (Experimental)
* Expose `react-reconciler/persistent` for building renderers that use persistent data structures. ([@gaearon](https://github.com/gaearon) in [#12156](https://github.com/facebook/react/pull/12156))
* Pass host context to `finalizeInitialChildren()`. ([@jquense](https://github.com/jquense) in [#11970](https://github.com/facebook/react/pull/11970))
* Remove `useSyncScheduling` from the host config. ([@acdlite](https://github.com/acdlite) in [#11771](https://github.com/facebook/react/pull/11771))
### React Call Return (Experimental)
* Fix a crash on updates. ([@rmhartog](https://github.com/rmhartog) in [#11955](https://github.com/facebook/react/pull/11955))
## 16.2.1 (August 1, 2018)
### React DOM Server
* Fix a [potential XSS vulnerability when the attacker controls an attribute name](https://reactjs.org/blog/2018/08/01/react-v-16-4-2.html) (`CVE-2018-6341`). This fix is available in the latest `react-dom@16.4.2`, as well as in previous affected minor versions: `react-dom@16.0.1`, `react-dom@16.1.2`, `react-dom@16.2.1`, and `react-dom@16.3.3`. ([@gaearon](https://github.com/gaearon) in [#13302](https://github.com/facebook/react/pull/13302))
## 16.2.0 (November 28, 2017)
@@ -48,6 +321,12 @@
* Many tests were rewritten against the public API. Big thanks to [everyone who contributed](https://github.com/facebook/react/issues/11299)!
## 16.1.2 (August 1, 2018)
### React DOM Server
* Fix a [potential XSS vulnerability when the attacker controls an attribute name](https://reactjs.org/blog/2018/08/01/react-v-16-4-2.html) (`CVE-2018-6341`). This fix is available in the latest `react-dom@16.4.2`, as well as in previous affected minor versions: `react-dom@16.0.1`, `react-dom@16.1.2`, `react-dom@16.2.1`, and `react-dom@16.3.3`. ([@gaearon](https://github.com/gaearon) in [#13302](https://github.com/facebook/react/pull/13302))
## 16.1.1 (November 13, 2017)
### React
@@ -138,6 +417,12 @@ Starting with 16.1.0, we will no longer be publishing new releases on Bower. You
* First release of the [new experimental package](https://github.com/facebook/react/tree/master/packages/react-call-return) for parent-child communication. ([@gaearon](https://github.com/gaearon) in [#11364](https://github.com/facebook/react/pull/11364))
## 16.0.1 (August 1, 2018)
### React DOM Server
* Fix a [potential XSS vulnerability when the attacker controls an attribute name](https://reactjs.org/blog/2018/08/01/react-v-16-4-2.html) (`CVE-2018-6341`). This fix is available in the latest `react-dom@16.4.2`, as well as in previous affected minor versions: `react-dom@16.0.1`, `react-dom@16.1.2`, `react-dom@16.2.1`, and `react-dom@16.3.3`. ([@gaearon](https://github.com/gaearon) in [#13302](https://github.com/facebook/react/pull/13302))
## 16.0.0 (September 26, 2017)
### New JS Environment Requirements
@@ -624,7 +909,7 @@ Each of these changes will continue to work as before with a new warning until t
-`Object.is` is used in a number of places to compare values, which leads to fewer false positives, especially involving `NaN`. In particular, this affects the `shallowCompare` add-on. ([@chicoxyzzy](https://github.com/chicoxyzzy) in [#6132](https://github.com/facebook/react/pull/6132))
- Add-Ons: ReactPerf no longer instruments adding or removing an event listener because they don’t really touch the DOM due to event delegation. ([@antoaravinth](https://github.com/antoaravinth) in [#5209](https://github.com/facebook/react/pull/5209))
###Other improvements
###Other improvements
- React now uses `loose-envify` instead of `envify` so it installs fewer transitive dependencies. ([@qerub](https://github.com/qerub) in [#6303](https://github.com/facebook/react/pull/6303))
- Shallow renderer now exposes `getMountedInstance()`. ([@glenjamin](https://github.com/glenjamin) in [#4918](https://github.com/facebook/react/pull/4918))
Facebook has adopted a Code of Conduct that we expect project participants to adhere to. Please [read the full text](https://code.facebook.com/pages/876921332402685/open-source-code-of-conduct) so that you can understand what actions will and will not be tolerated.
Facebook has adopted a Code of Conduct that we expect project participants to adhere to. Please [read the full text](https://code.fb.com/codeofconduct/) so that you can understand what actions will and will not be tolerated.
@@ -34,26 +47,14 @@ class HelloMessage extends React.Component {
}
ReactDOM.render(
<HelloMessagename="John"/>,
<HelloMessagename="Taylor"/>,
document.getElementById('container')
);
```
This example will render "Hello John" into a container on the page.
This example will render "Hello Taylor" into a container on the page.
You'll notice that we used an HTML-like syntax; [we call it JSX](https://reactjs.org/docs/introducing-jsx.html). JSX is not required to use React, but it makes code more readable, and writing it feels like writing HTML. We recommend using [Babel](https://babeljs.io/) with a [React preset](https://babeljs.io/docs/plugins/preset-react/) to convert JSX into native JavaScript for browsers to digest.
## Installation
React is available as the `react` package on [npm](https://www.npmjs.com/). It is also available on a [CDN](https://reactjs.org/docs/cdn-links.html).
React is flexible and can be used in a variety of projects. You can create new apps with it, but you can also gradually introduce it into an existing codebase without doing a rewrite.
The recommended way to install React depends on your project. Here you can find short guides for the most common scenarios:
* [Trying Out React](https://reactjs.org/docs/try-react.html)
* [Creating a New Application](https://reactjs.org/docs/add-react-to-a-new-app.html)
* [Adding React to an Existing Application](https://reactjs.org/docs/add-react-to-an-existing-app.html)
You'll notice that we used an HTML-like syntax; [we call it JSX](https://reactjs.org/docs/introducing-jsx.html). JSX is not required to use React, but it makes code more readable, and writing it feels like writing HTML. If you're using React as a `<script>` tag, read [this section](https://reactjs.org/docs/add-react-to-a-website.html#optional-try-react-with-jsx) on integrating JSX; otherwise, the [recommended JavaScript toolchains](https://reactjs.org/docs/create-a-new-react-app.html) handle it automatically.
description="Pointer Events are not supported in every browser. The examples below might not work in every browser. To test pointer events, make sure to use Google Chrome, Firefox, Internet Explorer, or Edge.">
This is a demo application based on [Dan Abramov's](https://github.com/gaearon) recent [JSConf Iceland talk](https://reactjs.org/blog/2018/03/01/sneak-peek-beyond-react-16.html) about React.
It depends on a local build of React and enables us to easily test async and "suspense" APIs in a more "real world app" like context.
## Can I use this code in production?
No. The APIs being tested here are unstable and some of them have still not been released to NPM. For now, this fixture is only a test harness.
font-family:-apple-system,BlinkMacSystemFont,"Segoe UI",Roboto,Helvetica,Arial,sans-serif,"Apple Color Emoji","Segoe UI Emoji","Segoe UI Symbol";
color:var(--color-pageText);
background-color:var(--color-pageBg);
}
/* -------------------------------- */
/* Debugger */
/* -------------------------------- */
#debugger{
position:absolute;
top:0;left:0;right:0;bottom:0;
/* width: 100vw; */
/* height: 100vh; */
pointer-events:none;
}
.🎛{
position:fixed;
max-width:calc(var(--pt)*28);
border-radius:var(--pt);
padding:calc(var(--pt)*2);
background-color:var(--color-debuggerBg);
border:1pxsolidvar(--color-debuggerBorder);
border-radius:0.5rem;
color:var(--color-debuggerText);
pointer-events:all;
}
.🕹{
background-color:var(--color-buttonBg);
border:1pxsolidvar(--color-buttonBorder);
border-radius:var(--pt);
padding:0;
width:calc(var(--pt)*5);
height:calc(var(--pt)*5);
font-size:calc(var(--pt)*3);
line-height:1;
font-weight:bold;
cursor:pointer;
user-select:none;
}
.🕹.👶{
width:calc(var(--pt)*3);
height:calc(var(--pt)*3);
font-size:calc(var(--pt)*2);
}
.🕹.🐘{
width:auto;
height:calc(var(--pt)*7);
padding:var(--pt)calc(var(--pt)*2);
}
.🕹:hover{
background-color:white;
top:-4px;
left:-4px;
box-shadow:4px4px0var(--color-buttonBorder);
}
.🕹:active{
box-shadow:none;
top:0;
left:0;
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
