The consumer is in fact pushing the updates and _that_'s the component
that would really need the view_update_generator at hand. The consumer
is created from the generator itself so no troubles getting the pointer.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Schema related files are moved there. This excludes schema files that
also interact with mutations, because the mutation module depends on
the schema. Those files will have to go into a separate module.
Closes#12858
Move mutation-related files to a new mutation/ directory. The names
are kept in the global namespace to reduce churn; the names are
unambiguous in any case.
mutation_reader remains in the readers/ module.
mutation_partition_v2.cc was missing from CMakeLists.txt; it's added in this
patch.
This is a step forward towards librarization or modularization of the
source base.
Closes#12788
The flat_mutation_reader files were conflated and contained multiple
readers, which were not strictly necessary. Splitting optimizes both
iterative compilation times, as touching rarely used readers doesn't
recompile large chunks of codebase. Total compilation times are also
improved, as the size of flat_mutation_reader.hh and
flat_mutation_reader_v2.hh have been reduced and those files are
included by many file in the codebase.
With changes
real 29m14.051s
user 168m39.071s
sys 5m13.443s
Without changes
real 30m36.203s
user 175m43.354s
sys 5m26.376s
Closes#10194
Not a completely mechanical transition. The consumer has to generate its
mutation via a mutation_rebuilder_v2 as mutation fragment v2 cannot be
applied to mutations directly yet.
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
Move replica-oriented classes to the replica namespace. The main
classes moved are ::database, ::keyspace, and ::table, but a few
ancillary classes are also moved. There are certainly classes that
should be moved but aren't (like distributed_loader) but we have
to start somewhere.
References are adjusted treewide. In many cases, it is obvious that
a call site should not access the replica (but the data_dictionary
instead), but that is left for separate work.
scylla-gdb.py is adjusted to look for both the new and old names.
Every time db/config.hh is modified (e.g., to add a new configuration
option), 110 source files need to be recompiled. Many of those 110 didn't
really care about configuration options, and just got the dependency
accidentally by including some other header file.
In this patch, I remove the include of "db/config.hh" from all header
files. It is only needed in source files - and header files only
need forward declarations. In some cases, source files were missing
certain includes which they got incidentally from db/config.hh, so I
had to add these includes explicitly.
After this patch, the number of source files that get recompiled after a
change to db/config.hh goes down from 110 to 45.
It also means that 65 source files now compile faster because they don't
include db/config.hh and whatever it included.
Additionally, this patch also eliminates a few unnecessary inclusions
of database.hh in other header files, which can use a forward declaration
or database_fwd.hh. Some of the source files including one of those
header files relied on one of the many header files brought in by
database.hh, so we need to include those explicitly.
In view_update_generator.hh something interesting happened - it *needs*
database.hh because of code in the header file, but only included
database_fwd.hh, and the only reason this worked was that the files
including view_update_generator.hh already happened to unnecessarily
include database.hh. So we fix that too.
Refs #1
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20210505121830.964529-1-nyh@scylladb.com>
Every time db/config.hh is modified (e.g., to add a new configuration
option), 110 source files need to be recompiled. Many of those 110 didn't
really care about configuration options, and just got the dependency
accidentally by including some other header file.
In this patch, I remove the include of "db/config.hh" from all header
files. It is only needed in source files - and header files only
need forward declarations. In some cases, source files were missing
certain includes which they got incidentally from db/config.hh, so I
had to add these includes explicitly.
After this patch, the number of source files that get recompiled after a
change to db/config.hh goes down from 110 to 45.
It also means that 65 source files now compile faster because they don't
include db/config.hh and whatever it included.
Additionally, this patch also eliminates a few unnecessary inclusions
of database.hh in other header files, which can use a forward declaration
or database_fwd.hh. Some of the source files including one of those
header files relied on one of the many header files brought in by
database.hh, so we need to include those explicitly.
In view_update_generator.hh something interesting happened - it *needs*
database.hh because of code in the header file, but only included
database_fwd.hh, and the only reason this worked was that the files
including view_update_generator.hh already happened to unnecessarily
include database.hh. So we fix that too.
Refs #1
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20210505102111.955470-1-nyh@scylladb.com>
We want to start tracking the memory consumption of mutation fragments.
For this we need schema and permit during construction, and on each
modification, so the memory consumption can be recalculated and pass to
the permit.
In this patch we just add the new parameters and go through the insane
churn of updating all call sites. They will be used in the next patch.
So that tests can test the `view_update_consumer` in isolation, without
having to set up the whole database machinery. In addition to less
infrastructure setup, this allows more direct checking of mutations
pushed for view generation.
The view update generation process creates two readers. One is used to
read the staging sstables, the data which needs view updates to be
generated for, and another reader for each processed mutation, which
reads the current value (pre-image) of each row in said mutation. The
staging reader is created first and is kept alive until all staging data
is processed. The pre-image reader is created separately for each
processed mutation. The staging reader is not restricted, meaning it
does not wait for admission on the relevant reader concurrency
semaphore, but it does register its resource usage on it. The pre-image
reader however *is* restricted. This creates a situation, where the
staging reader possibly consumes all resources from the semaphore,
leaving none for the later created pre-image reader, which will not be
able to start reading. This will block the view building process meaning
that the staging reader will not be destroyed, causing a deadlock.
This patch solves this by making the staging reader restricted and
making it evictable. To prevent thrashing -- evicting the staging reader
after reading only a really small partition -- we only make the staging
reader evictable after we have read at least 1MB worth of data from it.
It is currently not possible to wrap the view_updating_consumer in an
std::optional. I intend to do it to allow for compactions to optionally
generate view updates.
The reason for that is that view_updating_consumer has a reference as a
member, which makes the move assignment constructor not be implicitly
generated.
This patch fixes it by keeping a pointer instead of a reference.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20200421123648.8328-1-glauber@scylladb.com>
There is no reason to read a single SSTable at a time from the staging
directory. Moving SSTables from staging directory essentially involves
scanning input SSTables and creating new SSTables (albeit in a different
directory).
We have a mechanism that does that: compactions. In a follow up patch, I
will introduce a new specialization of compaction that moves SSTables
from staging (potentially compacting them if there are plenty).
In preparation for that, some signatures have to be changed and the
view_updating_consumer has to be more compaction friendly. Meaning:
- Operating with an sstable vector
- taking a table reference, not a database
Because this code is a bit fragile and the reviewer set is fundamentally
different from anything compaction related, I am sending this separately
Signed-off-by: Glauber Costa <glauber@scylladb.com>
The header sits in many other headers, but there's a handy
schema_fwd.hh that's tiny and contains needed declarations
for other headers. So replace shema.hh with schema_fwd.hh
in most of the headers (and remove completely from some).
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Message-Id: <20200303102050.18462-1-xemul@scylladb.com>
The view_update_generator acceps (and keeps) database and storage_proxy,
the latter is only needed to initialize the view_updating_consumer which,
in turn, only needs it to get database from (to find column family).
This can be relaxed by providing the database from _generator to _consumer
directly, without using the storage_proxy in between.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Message-Id: <20200207112427.18419-1-xemul@scylladb.com>
Many headers don't really need to include database.hh, the include can
be replaced by forward declarations and/or including the actually needed
headers directly. Some headers don't need this include at all.
Each header was verified to be compilable on its own after the change,
by including it into an empty `.cc` file and compiling it. `.cc` files
that used to get `database.hh` through headers that no longer include it
were changed to include it themselves.
